CHIRP

Just adding this to note that using the UV-17 Pro modules provided in #10648 mostly works with my UV-5RH; programmed MR channels work fine, but settings tab has a "list index out of range" error.

Also adding UV-17pro gives memory 0 channel which my UV5RH does not have. Uploading a saved file works but then all the channel numbers are wrong.

Hello. A recent post about the UV-5G Plus referred to this ticket for participation. I am interested in CHIRP support for the UV-5G Plus. I have tried some of the UV-5XX choices for both Baofeng and Radioddity. Thank you!

I've just got my UV-5RH. When trying to read from it by choosing UV-17 Pro as suggested here, I get an error message saying "Not the amount of data we expect". Any hint how to solve this problem (assuming it can be solved)? Thanks in advance.

Jim Unroe (sorry, I do not know how to quote a message, I'm new here).

Your instructions were VERY helpful! After installing the Prolific v3.2.0.0 device driver and choosing 5RM, I could read from the radio, paste the memories from the configuration file of my old uv-5r in a new file, and upload it to the uv-5rh. It worked perfectly, thank you so much!

Only one more detail, if you do not mind. On my old uv-5r, when hitting the vFo/mr orange button the display changed from the frequency to the name of the channel. On the new uv-5rh the same button switches from frequency mode to channel mode (says the nice lady speaking from the radio) but the display show what looks like a different frequency. For example, for channel 1 have

Frequency Name
446.00625 PMR-1

On frequency mode, the display shows 446.00625 (correct), but for channel mode it shows 402.22500 instead of PMR-1. What am I doing wrong?

Thank you again for your help!

Excellent - thank you so much !

Hello, I have a question. Is it possible to add the service settings option? so that I could manually set the squelch for the uv5rH and similar models, because the basic values ​​are too high. I have the uv5r 8W and the uv5rH/M 10W. I would like to change the squelch values ​​as in the case of the uv5r. The uv5rH receives the same transmission more clearly as the uv5r, but sometimes I have to hold down the monitor button because the transmission does not always open the squelch. I tried using CTCSS, it helped only slightly. I have several antennas but it makes no difference which one is connected. Unless it is the fault of the radio itself. Has anyone had a similar case? I apologize if this is not the right topic.

Hello, I have a question. Is it possible to add the service settings option? so that I could manually set the squelch for the uv5rH and similar models, because the basic values ​​are too high. I have the uv5r 8W and the uv5rH/M 10W. I would like to change the squelch values ​​as in the case of the uv5r. The uv5rH receives the same transmission more clearly as the uv5r, but sometimes I have to hold down the monitor button because the transmission does not always open the squelch. I tried using CTCSS, it helped only slightly. I have several antennas but it makes no difference which one is connected. Unless it is the fault of the radio itself. Has anyone had a similar case? Unless it is possible to open the radio file in a different way that will allow editing these values?I apologize if this is not the right topic.