Bug #11782
openCHIRP not showing correct settings
0%
Description
(Describe what you were doing)
I programmed the UV-9G for repeater use while in frequency mode on 462.700 Mhz, setting
Menu No. 13 to 100 Hz tone
Menu No. 25 to +
Menu No. 26 to 5.000
Menu No. 27 to 21 (also tried to 31, same results)
(Describe what you expected to happen)
I expected when I uploaded to CHIRP I would see:
Tone Mode: Tone
Tone: 100.0
Duplex: +
Offset/TX Freq: 5.000
(Describe what actually happened instead)
when I uploaded the radio's settings to CHIRP (v20250110) It showed:
Tone Mode: Tone
Tone: 100.0
Duplex: off (should show +)
Offset/TX Freq: blank (should show 5.000)
(Has this ever worked before? New radio? Does it work with OEM software?)
I have only been able to program the UV-9G for repeater use by programming settings in CHIRP and downloading to radion. I am not aware of any OEM software.
Thank you for this great piece of software!!
Eric
Files
Updated by Eric Randall 5 days ago
- File config.txt config.txt added
- File Baofeng_UV-9G_20250116.img Baofeng_UV-9G_20250116.img added
- File win_system_info.txt win_system_info.txt added
- File debug_log.txt debug_log.txt added
[Uploaded from CHIRP next-20250110]
Updated by Dan Smith 5 days ago
Hi Eric, you'll need to tell us what each of the menus actually are in your radio as we don't all have one of those radios and the menu numbers are specific. Also, if any of them are related to "tx inhibit" or similar, that would explain the behavior. Also, please indicate which memory you saved those settings into. Just setting them in the menu doesn't actually put them in a channel.