Bug #11351
closedBaofeng BF-T20 unable to download from radio
100%
Description
tried 4 radios, 2 cables, 2 com ports. Cannot get image of radio. Error is "radio did not enter ;programming mode after 5 tries." Have tried the other radio types suggested in thread #9821.
process: updated and ran CHIRP
connect download cable to PC and radio. Turned radio on. Selected appropriate download. Got error, cycled power, no change.
Tried to download from a BF888 - success
Tried again with T20, now getting different error (Radio Identification Failed), see 2nd debug log
Hope you can help and it's not just stupidity on my part
Files
| chirp_debug-bixipzjg_T20-2_240518.txt (5.34 KB) chirp_debug-bixipzjg_T20-2_240518.txt | 2nd debug log | ||
| chirp_debug-i55n96ah_T20-3_240519.txt (13.3 KB) chirp_debug-i55n96ah_T20-3_240519.txt | debug log 3 | ||
| CM_Photogrid_1716115156851.jpg (120 KB) CM_Photogrid_1716115156851.jpg | screen pics | ||
| retevis_rt22_P32073.py (22 KB) retevis_rt22_P32073.py |
Updated by Dan Smith 4 months ago
The radio is responding, but with an identification string that the driver doesn't like. So I think that means you're not doing anything wrong, but @Jim Unroe will probably have to have a look.
Interestingly, that ident shows up in kyd.py (which hasn't been converted for chirp-next yet), but surely that's a coincidence right?
Updated by Jim Unroe 4 months ago
- File retevis_rt22_P32073.py added
See if this test driver module will successfully read your radios. To test, follow the instructions here: LoadingTestModules
Updated by Mark Perry 4 months ago
- File chirp_debug-i55n96ah_T20-3_240519.txt chirp_debug-i55n96ah_T20-3_240519.txt added
- File CM_Photogrid_1716115156851.jpg CM_Photogrid_1716115156851.jpg added
unsuccessful. Updated Chirp, loaded test module from issue#, got error message 'invalid or unsupported module file.'
after a few attempts background changed colour and there was an indication that a test module had loaded (but same module file error every time.)
Still unable to download radio, error is 'radio would not accept program mode after 5 tries.'
screen pics and debug log #3 attached
Updated by Jim Unroe 4 months ago
- File retevis_rt22_P32073.py retevis_rt22_P32073.py added
My bad. That's what I get for being too confident with the my change and attach it without testing. This one should load.
Updated by Mark Perry 4 months ago
That all works perfectly well. Thank you very much!
Updated by Jim Unroe 4 months ago
- Status changed from New to In Progress
- Assignee set to Jim Unroe
- Target version set to chirp-py3
- % Done changed from 0 to 100
A patch has been submitted. Support will be in the next CHIRP-next build following approval. In the mean time, continue to use the test driver module.
Updated by Anonymous 4 months ago
- Status changed from In Progress to Closed
Applied in changeset github|559975bb3144a19682bb437a8bda12d1a69363c4.