Chuck Murcko
- Registered on: 07/12/2023
- Last connection: 06/18/2024
Issues
| open | closed | Total | |
|---|---|---|---|
| Assigned issues | 0 | 0 | 0 |
| Reported issues | 1 | 2 | 3 |
Activity
06/16/2024
- 04:59 PM CHIRP New Model #11383: Baofeng BF-18H and BF-18L supported by UV-25 driver
- Thanks. UV-17Pro driver also works, so I guess one or another is aliased.
- 10:06 AM CHIRP New Model #11383 (Closed): Baofeng BF-18H and BF-18L supported by UV-25 driver
- This is more of a heads-up than a driver request. UV-25 driver appears to work fine with these other radios (which Ba...
- 09:50 AM CHIRP New Model #10648: Support for Baofeng UV-17 Pro GPS radio (and related models UV-18/19/20/21/22)
- Chuck Murcko wrote in #note-41:
> I have tested UV-18H and UV-18L to work with the UV-25 driver already contained in... - 09:48 AM CHIRP New Model #10648: Support for Baofeng UV-17 Pro GPS radio (and related models UV-18/19/20/21/22)
- I have tested UV-18H and UV-18L to work with the UV-25 driver already contained in Chirp.
73, Chuck AI7SY
01/31/2024
- 05:23 AM CHIRP Bug #10777: Chirp does not allow frequency entry from 300-350 MHz on wideband UV-K5 even with limits disabled
- Driver appears to be working fine. The last couple of issues were from firmware - please disregard posts 9/10.
11/07/2023
- 04:50 PM CHIRP Bug #10777: Chirp does not allow frequency entry from 300-350 MHz on wideband UV-K5 even with limits disabled
- With the BANDS_NOLIMITS patch, frequencies between 300-349.999 MHz can be manually inserted from the radio keypad aft...
- 04:41 PM CHIRP Bug #10777: Chirp does not allow frequency entry from 300-350 MHz on wideband UV-K5 even with limits disabled
- The issue has changed with Chirp rev 20231106. Memories can be edited with the patch above, but are now written to th...
09/22/2023
- 03:04 AM CHIRP Bug #10693: Baofeng UV-S9X3 downgraded from tri-band to dual-band
- All's almost well. I used your factory image instead of mine. The only error I get in Settings is when I try to set W...
09/21/2023
- 11:35 PM CHIRP Bug #10693: Baofeng UV-S9X3 downgraded from tri-band to dual-band
- I also tried changing settings with Chirp on my factory image and got the above error. Image and debug log attached. ...
- 11:10 PM CHIRP Bug #10693: Baofeng UV-S9X3 downgraded from tri-band to dual-band
- I'm kinda surprised no one's replied. I got a UV-S9X3 today, and tried the new driver. Transmit works on 220. I've at...
Also available in: Atom