BaofengUV5R » History » Version 1
Dan Smith, 06/24/2015 12:19 PM
1 | 1 | Dan Smith | {{toc}} |
---|---|---|---|
2 | |||
3 | h1. BaofengUV5R |
||
4 | |||
5 | This page provides general tips and troubleshooting for the Baofeng UV-5R and related radios. The UV-5R is the base model for a lot of variants, so this page will apply to many more people than just those with that specific badge on their radio. This information is a summarized version of the Miklor page on the subject. Go there for "more detailed information":http://www.miklor.com/COM/UV_ErrorMess.php |
||
6 | |||
7 | h2. Common Errors |
||
8 | |||
9 | h3. Radio Did Not Respond |
||
10 | |||
11 | This is a very common problem. |
||
12 | Slightly offset audio jacks could be the problem. |
||
13 | |||
14 | Make sure the connector is snapped in all the way. |
||
15 | Some cables require a really hard push to snap in that last 1/16 inch. |
||
16 | |||
17 | One indication is that the transmitter may be keyed. |
||
18 | A slight trimming of the cable's plug side and edge may be required. |