Project

General

Profile

Actions

BaofengUV5R » History » Revision 1

Revision 1/31 | Next »
Dan Smith, 06/24/2015 12:19 PM


{{toc}}

h1. BaofengUV5R

This page provides general tips and troubleshooting for the Baofeng UV-5R and related radios. The UV-5R is the base model for a lot of variants, so this page will apply to many more people than just those with that specific badge on their radio. This information is a summarized version of the Miklor page on the subject. Go there for "more detailed information":http://www.miklor.com/COM/UV_ErrorMess.php

h2. Common Errors

h3. Radio Did Not Respond

This is a very common problem.
Slightly offset audio jacks could be the problem.

Make sure the connector is snapped in all the way.
Some cables require a really hard push to snap in that last 1/16 inch.

One indication is that the transmitter may be keyed.
A slight trimming of the cable's plug side and edge may be required.

Updated by Dan Smith over 9 years ago · 1 revisions