Actions
Feature #777
openAdd option to set DTR and RTS
Start date:
04/09/2013
Due date:
% Done:
0%
Estimated time:
2:00 h
Chirp Version:
0.3.0
Model affected:
(All models)
I read the instructions above:
Description
Some serial-to radio cables use RS232-to-TTL converters, and/or have TTL logic to split out TX and RX from just one signal line (eg, most of the Icom radios). Some of these converters generate the necessary power from RTS/DTS and ground. The better ones tend to generate the power from the differential between RTS=low and DTS=high (or vice versa), allowing full RS-232 signalling levels.
The latter case requires that DTS and RTS be set differently. Note that "Ham Radio Deluxe" has had this option (stored on a per-radio configuration basis) for years, as has RumTrol (for the Icom IC-7000).
Actions