Feature #5579
closedYaesu FT-2D Chirp *.dat file open error
0%
Description
Chirp 20180204 daily build (macOS)
macOS 10.13.3 High Sierra
HT: Yaesu FT-2DR (US)
Description: Formatted a 4G SD card in the FT-2DR. Created a backup of the FT-2DR and saved to SD card (BACKUP.dat). Created a backup of the memory channels and saved to SD card (MEMORY.dat). Opened Chirp, selection Open File, selected *.dat for file types, selected folder where I copied the BACKUP.dat and MEMORY.dat files from the SD card (see FT-2DR Screen Shot_1.jpeg). Once I clicked ok to open the BACKUP.dat file, Chirp reported an error message "Unable to detect model!" (see FT-2DR_Screen Shot_2.jpeg). I then selected the drop down menu and selected the "Yaesu FT2" radio (see FT-2D_Screen Shot_3.jpeg). The MEMORY.dat file then opens but the name column has "ERROR" for memory slots 1 through 38, which coincidentally is the number of memory channels I currently have hand programmed into the FT-2DR. Appears that no data is being read by Chirp (see FT-2DR Screen Shot_4.jpeg), even though the file tab does state "Yaesu FT2D:BACKUP.dat".
So not sure if this is a bug or not, but I would have expected Chirp to be able to open the *.dat file format.
Files
Updated by Kell Bodholt over 6 years ago
Second to last sentence should have referenced the "BACKUP.dat" file rather than the "MEMORY.dat" file. Apologies.
Updated by Chris Gray over 6 years ago
20180810 - This appears to still be an issue with the addition that the option for Yaesu FT2 has been removed from the list of radios.
Updated by Dan Smith over 6 years ago
Chris Gray wrote:
20180810 - This appears to still be an issue with the addition that the option for Yaesu FT2 has been removed from the list of radios.
Why do you say this? Nothing has changed in this regard that I know of, and indeed I see it on 20100810 myself. See that it's on the model support report here:
https://trac.chirp.danplanet.com/chirp_daily/daily-20180810/Model_Support.html
Updated by Chris Gray over 6 years ago
Dan Smith wrote:
Why do you say this? Nothing has changed in this regard that I know of, and indeed I see it on 20100810 myself. See that it's on the model support report here:
https://trac.chirp.danplanet.com/chirp_daily/daily-20180810/Model_Support.html
Hi Dan!
Thanks for the link. OK, I tried it from my Windows PC and I see the FT2D there so I deleted and downloaded it again on my Mac and I see it there now too - guessing something got corrupted on my end. So I'm good there, but maybe I'm doing something else wrong. When I edit the backup.dat file and restore it to my radio, it goes to a factory reset configuration and asks me for my call sign and all of my settings are gone and none of the memories i created are there. My radio is an old firmware - Main Ver. 1.01, Sub Ver. 1.00. I get the same "reset to default" issue if I edit and restore the memory.dat file.
Any help would be greatly appreciated!
Updated by William Hirsch almost 5 years ago
I'm having this issue with the FT3D as well. See https://chirp.danplanet.com/issues/7561#change-19295
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
Updated by Bernhard Hailer about 4 years ago
- Tracker changed from Bug to Feature
- Status changed from Feedback to Closed