Actions
Bug #4175
closedWouxun KG-UV8D Tx Inhibit
Start date:
11/01/2016
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Wouxun KG-UV8D
Platform:
Windows
I read the instructions above:
Description
From E-mail Thread "Wouxun Tx Inhibit" http://intrepid.danplanet.com/pipermail/chirp_users/2016-October/010992.html
I'm unable to set the Wouxun KG-UV8D to Tx Inhibit. Duplex "Off" is not an option for this radio in chirp. Setting the offset to 0 or blank is "Outside the tx range" on this radio.
I've attached a Chirp Image from the radio after it was programmed with the Wouxun Software. The Wouxun software allows me to remove the tx frequency from the programming resulting in a memory channel that can not be transmitted on. In the attached file, memory locations 1 - 6 are setup from the factory software to not transmit. Memory channels 7-20 are setup as simplex channels (FRS 1 - 14)
Thank you
Files
Actions