New Model #4103
openZastone ZT-D9000
Added by Eric schwab about 8 years ago. Updated 2 months ago.
0%
Description
Is this radio supported?
It's a derivative of the , Btech UV-50x3, Vero Telecom VR-6600 PRO , Yaesu FTM-350 line.
Thanks
Files
| D9000写频软件英文版本（无密码）.rar (1.37 MB) D9000写频软件英文版本（无密码）.rar | Matthew Golanoski, 09/04/2017 07:41 AM | ||
| read-dump.txt (394 KB) read-dump.txt | Roman Root, 09/14/2017 11:06 AM | ||
| chirp error 0.PNG (10 KB) chirp error 0.PNG | Cowherd Joe, 05/03/2021 08:57 AM | ||
| chirp error 1.PNG (8.06 KB) chirp error 1.PNG | Cowherd Joe, 05/03/2021 08:57 AM |
Updated by Jim Unroe about 8 years ago
- Status changed from New to Feedback
This is the type of question that should be asked in the chirp_users mailing list.
There doesn't appear to be any OEM programming software available yet, so I'm going to take a guess and say no, it isn't supported.
Jim KC9HI
Updated by Tom Sawyer over 7 years ago
This appears to be a clone of the IC-2820. Will be receiving this week and will test / verify.
Updated by Matthew Golanoski about 7 years ago
- File D9000写频软件英文版本（无密码）.rar D9000写频软件英文版本（无密码）.rar added
I have a working Program from Zastone how can I help get this on Chirp????
Updated by Roman Root about 7 years ago
- File read-dump.txt read-dump.txt added
I have record dump when Read Data from station
Updated by Anonymous over 5 years ago
Any update on support for the Zastone D9000 radio please?
Updated by Brad Barrone almost 5 years ago
Anonymous wrote:
Any update on support for the Zastone D9000 radio please?
I am adding a bump here for this radio
Updated by Jared Miconi almost 5 years ago
I too would love to see support for this radio. If the developers require a radio to achieve this I will go and pull it out of my truck and send it to them as soon as I hear from them.
Thank you for Chirp, I really do appreciate this software and want to contribute to it.
Updated by Bernhard Hailer over 4 years ago
- Subject changed from Zastone ZT-D9000 supported? to Zastone ZT-D9000
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
Updated by Cowherd Joe over 3 years ago
Is there any hope to add Zastone D9000 to Chirp? It would be outstanding. The software Zastone provides is not very good.
Updated by Bernhard Hailer over 3 years ago
Have you tried to communicate with the radio using Chirp settings for an Icom IC-2820, as suggested above? Let us know.
Updated by Cowherd Joe over 3 years ago
- File chirp error 0.PNG chirp error 0.PNG added
- File chirp error 1.PNG chirp error 1.PNG added
Sorry for the delayed response.
Using the IC-2820 does not work communicating with the zastone d9000
Updated by Cowherd Joe over 3 years ago
@Bernard Hailer, I can loan equipment to make this happen too, if needed, and if the timing is OK.
I have tried many other CHIRP settings to attempt communications, to no avail.
Joe / KC1OMK
Updated by Bernhard Hailer over 3 years ago
- Equipment Loan/Gift Offered changed from No to Yes
Equipment loan offer flag set.
Updated by 4x4 Junkies ZA over 3 years ago
4x4 Junkies ZA wrote:
also looking for an update
Bumping up. Support desperately required
Updated by Cowherd Joe about 3 years ago
@Bernard Hailer: Is there any hope of Zastone D9000 support being added to Chirp?
Updated by Bernhard Hailer about 3 years ago
This depends on whether there's a developer interested in taking the task.
Sorry, I currently can't.
Updated by Bernhard Hailer about 3 years ago
However, if the line in the original request
It's a derivative of the , Btech UV-50x3, Vero Telecom VR-6600 PRO , Yaesu FTM-350 line.
is true, then you could try one of these settings in Chirp and see whether it works:
Maker: BTech
Model: UV-5X3
or
Maker: Yaesu
Model: FTM-350
Let us know whether it works for you!
Updated by Jim Unroe about 3 years ago
Bernhard Hailer wrote:
However, if the line in the original request
It's a derivative of the , Btech UV-50x3, Vero Telecom VR-6600 PRO , Yaesu FTM-350 line.
is true, then you could try one of these settings in Chirp and see whether it works:
Maker: BTech
Model: UV-5X3or
Maker: Yaesu
Model: FTM-350Let us know whether it works for you!
I took a quick look at the "read-dump.txt" file and I think is it safe to say the ZASTONE D9000 not a "derivative" of the BTECH UV-50X3 or any other CHIRP supported model.
Jim KC9HI
Updated by Lukasz Te over 2 years ago
4x4 Junkies ZA wrote:
Bumping up. Support desperately required
I'm joining it.
We desperately need support for the D9000.
The factory application (HPG-68D ...) is horrible and almost unusable compared to CHIRP.
Updated by David Davies over 2 years ago
I too am very interested in getting the D9000 on CHIRP.....
Updated by Bernhard Hailer almost 2 years ago
- Related to New Model #10069: D9000 added
Updated by Denis Iusupov 2 months ago
Common, guys, this feature request lives for more than EIGHT years and there is still no any actions here =( =( =(
We need this station to be supported!