CHIRP

Hi Dan

When this started I read the ID-51A into CHIRP, removed/moved some memories
and noticed CHIRP displayed 5MHz but the radio got 4MHz on some memories. I
then read the radio with iCom CS-51, corrected the TSQ and 4MHz issues, and
wrote to the radio. I then sent you the bug report.

To comply with your followup request, I read the radio into CHIRP and
re-wrote it back. I did NOT load the test module, as I wanted to prove that
without the fix the 4MHz problem exists and with the module it goes away.

It seems to have fixed itself. I didn't try the module (as I couldn't tell
if it was successful). Both CHIRP and CS-51 now read the radio without
the 4MHz (or the TSQ) issues.

Thanks for your thoughts

-Pres

On Fri, Nov 1, 2024 at 7:31 PM Dan Smith redmine@chirpmyradio.com wrote:

Just downloading and re-uploading the image from the radio will not touch any bits. You have to edit a memory with chirp to get it to make any changes, so it didn't just fix itself, you just weren't tickling the bug.

If you could, save an image of the fixed radio for later. Then:

• Open the file you attached here and upload to the radio
• Confirm it's wrong
• Close the file
• Load the module
• Open the file again
• Edit something about one of the broken memories (just changing the name is enough)
• Upload that back to the radio and confirm it looks right

I don't have an ID-51, so I can't test this, so your help in confirming is appreciated.

Will do.

Night

-Pres

On Fri, Nov 1, 2024 at 11:17 PM Dan Smith redmine@chirpmyradio.com wrote: