The Q332 series is identical in comm protocol as the Q10H and Q10G.

The difference is in the settings mapping.

There is a beta driver for the Q10H that I created located in the Q10H issue.

https://chirp.danplanet.com/issues/10692

I know that this driver will talk to the 332 series as users were using it to try and program their 332 radio.
I disabled programming for anything other than the Q10H or Q10G as I do not have a radio to test with and I didn't want users to mess up the settings in their radio.

please see this issue for more info

https://chirpmyradio.com/issues/10880#note-4

I have a KGQ-332 I can test with or loan for testing.¶

Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Tue, Oct 1, 2024 at 6:59 PM Dan Smith redmine@chirpmyradio.com wrote:

I have a KGQ-332 I'm willing to test with and/or loan for testing.¶

Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Tue, Oct 1, 2024 at 6:59 PM Dan Smith redmine@chirpmyradio.com wrote:

If you have a beta version of a driver for the KG-Q332, I'd be willing to
test it. If you have a version that just programs frequencies, I can use it
and program the other settings with the Wouxun programming software. Let me
know.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Tue, Oct 1, 2024 at 6:59 PM Dan Smith redmine@chirpmyradio.com wrote:

I would be willing to loan my KG-Q332 for testing.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Wed, Nov 27, 2024 at 1:30 PM Richard Van Fossan redmine@chirpmyradio.com
wrote:

If you have a driver for the KG-Q332 I can test, I have a radio. I can also
loan the radio for testing.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Wed, Nov 27, 2024 at 8:23 PM Dan Smith redmine@chirpmyradio.com wrote:

Do you have a version of the Q10H protocol that will work with the
KG-Q332? I can use the KG-Q332 software for settings.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Tue, Oct 1, 2024 at 6:34 PM Mel Terechenok redmine@chirpmyradio.com
wrote:

https://chirpmyradio.com/issues/10880#note-6

I will test it ASAP and get back to you. Thank you.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Sat, Feb 22, 2025 at 8:58 AM Mel Terechenok redmine@chirpmyradio.com
wrote:

I apologize for the time delay, but I'm having trouble finding my Wouxun
programming cable. I'm still looking. It's amazing how something can get
lost in a 360 ft² apartment.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Sun, Feb 23, 2025 at 1:55 AM Richard Van Fossan redmine@chirpmyradio.com
wrote:

I installed the cable from Wouxun, and tried programming the radio, but I
got "radio did not respond." To make sure, I tested the KG-Q332 programming
software, and it works just fine.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Sun, Mar 16, 2025 at 11:22 AM Richard Van Fossan <
redmine@chirpmyradio.com> wrote:

I installed the proper driver and retried the test with the supplied driver
for KG-Q332/336 (Channels only). I was able to upload a set of frequencies
(6M-70cm) downloaded from Repeaterbook. I will be testing the radio over
the next few days, but it seems to be working.

I have contacted Wouxun and asked for the settings mapping so CHIRP can
fully support the KG-Q332/336.

Thank you.

Regards,¶

Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Sun, Mar 16, 2025 at 6:29 PM Richard Van Fossan redmine@chirpmyradio.com
wrote:

I got a reply from Wouxun tech support. Their position is that it is
"inadvisable" to use CHIRP with Wouxun radios. I've asked why, but don't
expect a substantive answer.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Sun, Mar 16, 2025 at 8:03 PM Richard Van Fossan richvanf@gmail.com
wrote:

I installed the proper driver and retried the test with the supplied
driver for KG-Q332/336 (Channels only). I was able to upload a set of
frequencies (6M-70cm) downloaded from Repeaterbook. I will be testing the
radio over the next few days, but it seems to be working.

I have contacted Wouxun and asked for the settings mapping so CHIRP can
fully support the KG-Q332/336.

Thank you.

Regards,¶

Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Sun, Mar 16, 2025 at 6:29 PM Richard Van Fossan <
redmine@chirpmyradio.com> wrote:

I'm willing to loan a KG-Q332 and the Wouxun programming software if you
think that would allow you to reverse engineer the protocol.

===========================================================
Richard Van Fossan
Richardv@pobox.com
(253) 230-2525

On Fri, May 30, 2025 at 3:55 AM Richard Van Fossan redmine@chirpmyradio.com
wrote: