Project

General

Profile

Actions

Bug #10445

closed

Unable to enter the "Settings" tab

Added by Михаил Макаров over 1 year ago. Updated over 1 year ago.

Status:
Resolved
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
03/14/2023
Due date:
% Done:

100%

Estimated time:
Chirp Version:
next
Model affected:
Baofeng BF-T1
Platform:
Windows

Description

 Unable to enter the "Settings" tab 

Hello. I found an error in the operation of the program. When programming the frequencies for the "Baofeng BF-T1" radio.

  1. Perform a "reset all" on the radio. Restoring to the factory settings;
  2. Read the parameters from the radio by selecting the appropriate parameters;
  3. correct the required frequencies and parameters in the "Memories" tab;
  4. correct the required parameters in the "Settings" tab;
  5. Load data into the radio station (Alt+U).

    When reading data from the radio station again, everything works fine.

    But. If you turn on the radio (by pressing the "FM" key) and then turn it off. When reading the data from the station - it is impossible to enter the tab "Settings". In this case the following error appears on the screen: "Value 4545.1000 not in range 65.0000-108.0000" (see photo attachment "bf-t1_err.JPG").
    I am also attaching two log files:

  6. chirp_debug-gfesdyfc__read1.txt - tab "Settings" functions. Log-file downloaded before pressing "FM" key on the radio station.

  7. chirp_debug-gfesdyfc__read2.txt - tab "Settings" is functioning. Log file downloaded before pressing "FM" key on the radio station.

  8. chirp_debug-gfesdyfc__read3.txt - tab "Settings" is NOT functioning. Log file downloaded after pressing "FM" key on the radio station.

    Also noticed, that when programming frequencies (tab "Settings-FM Radio-FM Station") the parameter "105.9000" is always set (see photo "bf-t1_set.JPG"). Load the data into the radio station. Then press key "FM" on the radio station to display "108.100" (see photo "bf-t1_displ.JPG").
    Would not change the FM frequency (in the range of 76 - 108 MHz). When reading data by CHIRP. The tab "Settings-FM Radio-FM Station" always shows "105.9000".

The computer in use is running Windows 10. The version of CHIRP next-20230313.
My email for feedback: mihadmb@gmail.com


Files

bf-t1_err.JPG (95.2 KB) bf-t1_err.JPG Михаил Макаров, 03/14/2023 01:23 PM
bf-t1_set.JPG (57.1 KB) bf-t1_set.JPG Михаил Макаров, 03/14/2023 01:26 PM
bf-t1_displ.JPG (677 KB) bf-t1_displ.JPG Михаил Макаров, 03/14/2023 01:26 PM
chirp_debug-gfesdyfc__read1.txt (3.66 KB) chirp_debug-gfesdyfc__read1.txt Михаил Макаров, 03/14/2023 01:27 PM
chirp_debug-gfesdyfc__read2.txt (5.28 KB) chirp_debug-gfesdyfc__read2.txt Михаил Макаров, 03/14/2023 01:27 PM
chirp_debug-gfesdyfc__read3.txt (4.67 KB) chirp_debug-gfesdyfc__read3.txt Михаил Макаров, 03/14/2023 01:27 PM
Baofeng_BF-T1_20230315_GOOD.img (2.17 KB) Baofeng_BF-T1_20230315_GOOD.img Михаил Макаров, 03/14/2023 02:44 PM
Baofeng_BF-T1_20230315__NOT-good.img (2.17 KB) Baofeng_BF-T1_20230315__NOT-good.img Михаил Макаров, 03/14/2023 02:44 PM
number.JPG (89.3 KB) number.JPG Михаил Макаров, 03/15/2023 01:38 PM
number10445.JPG (95.2 KB) number10445.JPG Михаил Макаров, 03/15/2023 02:00 PM
bf_t1_fm.py (29.4 KB) bf_t1_fm.py Jim Unroe, 03/15/2023 02:12 PM
chirp_fm1.JPG (56.9 KB) chirp_fm1.JPG Михаил Макаров, 03/15/2023 03:38 PM
Actions

Also available in: Atom PDF