Project

General

Profile

Actions

Bug #10271

closed

FTM-350: New channels not visible on radio unless directly dialled

Added by Stuart Longland almost 2 years ago. Updated almost 2 years ago.

Status:
Closed
Priority:
Normal
Category:
-
Target version:
Start date:
01/14/2023
Due date:
% Done:

100%

Estimated time:
Chirp Version:
next (py3)
Model affected:
Yaesu FTM-350AR v1.6
Platform:
Linux
Debug Log:
I read the instructions above:

Description

I managed to program a FTM-350AR using Chirp, a USB serial adaptor (tried with my laptop's built-in RS-232, but it didn't like the non-standard baud rate) and a homebrew adaptor made many moons ago, however I note the new channels cannot be selected with the up/down buttons or the dial, I have to punch in the channel number directly.

Having a look at the memory browser, I don't see anything obvious, but clearly there's a "bitmap" here that tells the radio which channels are valid or not. The FT5DR had something similar in its little memory dump files.

I've uploaded the dump generated by Chirp -- now I'm not sure what parts of this file are Chirp headers, and what parts are Yaesu raw memory map: clearly it's not just a raw dump because Chirp can identify the radio from the .img file handed to it. hexdump -C doesn't show anything obvious, but maybe I need to make a change to a memory channel, then download an image again and diff the two to figure out where this extra bitmap is.


Files

Yaesu_FTM-350_20230114.img (64.3 KB) Yaesu_FTM-350_20230114.img Memory image from radio with phantom channels Stuart Longland, 01/14/2023 10:29 AM
Yaesu_FTM-350_blank.img (64.3 KB) Yaesu_FTM-350_blank.img Blank image immediately after reset. Stuart Longland, 01/15/2023 04:14 AM
Yaesu_FTM-350_repeaters.img (64.3 KB) Yaesu_FTM-350_repeaters.img After loading repeaters into the image using `chirpc` Stuart Longland, 01/15/2023 04:19 AM
Yaesu_FTM-350_configured.img (64.3 KB) Yaesu_FTM-350_configured.img Configuring the radio and backing-up the new settings. Stuart Longland, 01/15/2023 04:19 AM
test.img (64.3 KB) test.img Last night's image, with those LSBs changed to 1s Stuart Longland, 01/15/2023 05:00 AM
Actions

Also available in: Atom PDF