CHIRP

11/30/2023

11:12 AM CHIRP Bug #10978 (New): VHF TX Enable and UHF TX Enable Other Settings doesn't show

Expectation:
VHF TX Enable and UHF TX Enable should be appear under other settings > limits
Actual:
The two setti... Albert Linga

03/02/2016

02:18 AM CHIRP Bug #3395: Unable to read from Baofeng A58

Jim,
How are you comparing if the firmware version is supported? Also from what I have experienced, I was able to ... Albert Linga

03/01/2016

10:06 AM CHIRP Bug #3395: Unable to read from Baofeng A58

Albert Linga wrote:
> Hi Jim,
>
> Thank you for your response. I wonder if you have an idea on what's supposed to... Albert Linga

09:52 AM CHIRP Bug #3395: Unable to read from Baofeng A58

Hi Jim,
Thank you for your response. I wonder if you have an idea on what's supposed to be the line 1 and line 2 f... Albert Linga

02/28/2016

06:10 PM CHIRP Bug #3395: Unable to read from Baofeng A58

The line
1. raise errors.RadioError("Incorrect 'Model' selected.")
should be
#raise errors.RadioError("Inco... Albert Linga

05:34 PM CHIRP Bug #3395: Unable to read from Baofeng A58

So I tried commenting out some lines in uv5r.py
The following is a work around when I get a Radio did not respond ... Albert Linga

04:18 PM CHIRP Bug #3395: Unable to read from Baofeng A58

Also i'm using the baofeng generic cable for this. It uses prolific driver. I've seen there were issues on the new dr... Albert Linga

04:08 PM CHIRP Bug #3395 (Closed): Unable to read from Baofeng A58

When I'm trying to read from the radio it says Radio did not respond. I'm using BF-F8HP from the model. I tried switc... Albert Linga