DevelopersToneModes » History » Version 2
Dan Smith, 05/07/2012 01:19 PM
| 1 | 1 | Dan Smith | h1. Tone Modes in CHIRP |
|---|---|---|---|
| 2 | |||
| 3 | 2 | Dan Smith | h2. (None) |
| 4 | 1 | Dan Smith | |
| 5 | An empty Memory.tmode means that no tone is transmitted or received |
||
| 6 | |||
| 7 | h2. Tone |
||
| 8 | |||
| 9 | A Memory.tmode of "Tone" means that the radio will transmit a single sub-audible tone, according to the Memory.rtone value. In this mode, the receiver is carrier squelch. |
||
| 10 | |||
| 11 | h2. TSQL |
||
| 12 | |||
| 13 | A Memory.tmode of "TSQL" means that the radio will transmit a sub-audible tone, according to the Memory.ctone value. In this mode, the receiver uses tone squelch with the same value of Memory.ctone. |
||
| 14 | |||
| 15 | h2. DTCS |
||
| 16 | |||
| 17 | A Memory.tmode of "DTCS" means that the radio will transmit a DCS code, according to Memory.dtcs. In this mode, the receiver uses DTCS squelch with the same value of Memory.dtcs. |
||
| 18 | |||
| 19 | h2. Cross |
||
| 20 | |||
| 21 | A Memory.tmode of "Cross" means that the radio will use an asymmetric squelch configuration according to the value of Memory.cross_mode: |
||
| 22 | |||
| 23 | h3. Tone->Tone |
||
| 24 | |||
| 25 | A cross_mode of "Tone->Tone" means the radio will use sub-audible tones for transmit and receive, the values of which are Memory.rtone and Memory.ctone respectively. |
||
| 26 | |||
| 27 | h3. Tone->DTCS |
||
| 28 | |||
| 29 | A cross mode of "Tone->DTCS" means that the radio will use a sub-audible tone for transmit, according to Memory.rtone, and a DCS code for receiver squelch, according to Memory.dtcs. |
||
| 30 | |||
| 31 | h3. DTCS->Tone |
||
| 32 | |||
| 33 | A cross mode of "DTCS->Tone" means that the radio will use a DCS code for transmit, according to Memory.dtcs, and a sub-audible tone for receiver squelch, according to Memory.ctone. |
||
| 34 | |||
| 35 | h3. ->Tone |
||
| 36 | |||
| 37 | A cross mode of "->Tone" means that the radio will not transmit a sub-audible tone, but will enable tone squelch on the receiver according to the value of Memory.ctone. |
||
| 38 | |||
| 39 | h3. ->DTCS |
||
| 40 | |||
| 41 | A cross mode of "->DTCS" means that the radio will not transmit a sub-audible tone, but will enable DCS squelch on the receiver according to the value of Memory.dtcs |