BaofengUV5R » History » Version 17
John LaMartina, 06/20/2016 03:06 PM
| 1 | 1 | Dan Smith | {{toc}} |
|---|---|---|---|
| 2 | |||
| 3 | 11 | John LaMartina | h1. Baofeng UV5R / UV82 (and varients) |
| 4 | 1 | Dan Smith | |
| 5 | 12 | John LaMartina | This page provides general tips and troubleshooting for the Baofeng UV-5R, UV-82, and related radios. The UV-5R is the base model for a lot of variants, so this page will apply to many more people than just those with that specific badge on their radio. This information is a summarized version of the Miklor page on the subject. Go there for "more detailed information":http://www.miklor.com/COM/UV_ErrorMess.php |
| 6 | 1 | Dan Smith | |
| 7 | h2. Common Errors |
||
| 8 | 8 | John LaMartina | |
| 9 | 17 | John LaMartina | h3. |
| 10 | - Radio Did Not Respond |
||
| 11 | - Unable to Program |
||
| 12 | - Radio did Not Ack Programming Mode |
||
| 13 | - Radio did Not Ack first command |
||
| 14 | - Radio Radio refused to enter Programming Mode |
||
| 15 | 1 | Dan Smith | |
| 16 | 2 | Dan Smith | This is a very common problem. Slightly offset audio jacks could be the problem. Make sure the connector is snapped in all the way. Some cables require a really hard push to snap in that last 1/16 inch. One indication is that the transmitter may be keyed. A slight trimming of the cable's plug side and edge may be required. |
| 17 | 3 | John LaMartina | |
| 18 | 8 | John LaMartina | |
| 19 | 3 | John LaMartina | h3. Driver Issues |
| 20 | 1 | Dan Smith | |
| 21 | 15 | John LaMartina | Many of the inexpensive programming cables are not the bargain they appear. |
| 22 | 13 | John LaMartina | Due to Prolific USB/Serial chip 'clones' found in generic USB programming cables, an older driver is required in lieu of the driver now automatically supplied by Windows. for "more detailed information":http://http://www.miklor.com/COM/UV_Drivers.php |