Project

General

Profile

Actions

Feature #9941

closed

Yaesu FT-60 doesn't support DCS/PL Split

Added by Evan Platt almost 2 years ago. Updated about 1 year ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
-
Target version:
Start date:
07/08/2022
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-60
I read the instructions above:

Description

The Yaesu FT60 Supports a number of non listed (in chirp) formats - the formats ARE in chirp, but not available.

Tone->DTCS
A cross mode of "Tone->DTCS" means that the radio will use a sub-audible tone for transmit, according to Memory.rtone, and a DCS code for receiver squelch. If the radio's feature set includes "has_rx_dtcs" then the value used in this case is Memory.rx_dtcs. Otherwise, use Memory.dtcs

DTCS->Tone
A cross mode of "DTCS->Tone" means that the radio will use a DCS code for transmit, according to Memory.dtcs, and a sub-audible tone for receiver squelch. If the radio's feature set includes "has_ctone" then the value used in this case is Memory.ctone. Otherwise, use Memory.rtone.

->Tone

->DTCS
A cross mode of "->DTCS" means that the radio will not transmit a sub-audible tone, but will enable DCS squelch on the receiver. If the radio's feature set includes "has_rx_dtcs" then the value used in this case is Memory.rx_dtcs. Otherwise, use Memory.dtcs.

DTCS->
A cross mode of "DTCS->" means that the radio will use a DCS code for transmit, according to Memory.dtcs. In this mode, the receiver is carrier squelch.

DTCS->DTCS

Attached file, Channel 1 is set up as D-TSQL: Receive CTCSS 173.8, Transmit DCS 371. Channel 2 is set up as T-DCS. Transmit CTCSS 173.8/ receive DCS 371. However when imported they show ERROR


Files

yaesuft60tone.img (28.1 KB) yaesuft60tone.img Evan Platt, 07/08/2022 03:29 PM
Actions #1

Updated by Bernhard Hailer about 1 year ago

  • Tracker changed from Bug to Feature
  • Model affected changed from Yeasu FT-60 to Yaesu FT-60
  • Platform deleted (Windows)
Actions #2

Updated by Dan Smith about 1 year ago

  • Assignee set to Dan Smith
  • Target version set to chirp-py3
Actions #3

Updated by Dan Smith about 1 year ago

  • Status changed from New to Closed
  • % Done changed from 0 to 100
Actions #4

Updated by Dan Smith about 1 year ago

I think the FT-60 supports DTCS->, DTCS->Tone, and Tone->DTCS but not others like DTCS->DTCS and ->DTCS/->Tone. I've pushed fixes for the former. If the latter are really supported, please re-open and add another image showing those. The radio itself doesn't have room to store two DTCS codes in the memory structure, nor enumerations for the receive-only modes that I know of.

Actions

Also available in: Atom PDF