New Model #9784
closedBaofeng BF-V8 (UHF CB)
100%
Description
Apparently a software exists (however I could be wrong):
https://www.rtsystemsinc.com/BAO-V8-Programming-Software-Only-for-the-Baofeng-BF-V8_p_252.html
BF-V8 (BFV8) is not directly supported by CHIRP.
It is a FM UHF CB radio in the 400-470mhz range.
What the BF-V8 looks like:
http://www.security-twowayradios.com/sale-13300705-2020-hot-selling-baofeng-bf-v8-long-range-fm-uhf-400-470mhz-ham-portable-two-way-radiotransicver-wal.html
All help is truly appreciated,
Regards,
Mik
Files
Updated by Bernhard Hailer over 1 year ago
- Related to New Model #10045: BFtech BF-V8S added
Updated by Dai John over 1 year ago
I can confirm that the BF-V8 is fully supported using the BF-888 option in the latest build of CHIRP-next. The BF-V8 has the exact same functionality as the BF-888.
Can the BF-V8 be added to the home page, under Baofeng, as BF-V8 (use BF-888) ?
Updated by Jim Unroe over 1 year ago
Dai John wrote in #note-2:
I can confirm that the BF-V8 is fully supported using the BF-888 option in the latest build of CHIRP-next. The BF-V8 has the exact same functionality as the BF-888.
Can the BF-V8 be added to the home page, under Baofeng, as BF-V8 (use BF-888) ?
This ticket should probably have already been closed. The BF-V8A is already a CHIRP supported model (probably from a similar/suplicate ticket). Would you quickly verify this?
Jim KC9HI
Updated by Dai John over 1 year ago
The BF-V8A appears to be a different radio. When I programmed my BF-V8 (same radio as the link in the OP) using the BF-V8A option it did not save the CTCSS or DCS correctly which led to the squelch not opening even though the correct tone was used.
Updated by Jim Unroe over 1 year ago
Dai John wrote in #note-4:
The BF-V8A appears to be a different radio. When I programmed my BF-V8 (same radio as the link in the OP) using the BF-V8A option it did not save the CTCSS or DCS correctly which led to the squelch not opening even though the correct tone was used.
Same radio. Maybe you've discovered a bug. Attach an image with a channel that has an incorrectly saved tone.
Jim KC9HI
Updated by Dai John over 1 year ago
- File Baofeng_BF-V8A_20230206.img Baofeng_BF-V8A_20230206.img added
- File Capture.PNG Capture.PNG added
This fails to open the squelch on another radio set to the same tone.
Updated by Jim Unroe over 1 year ago
Dai John wrote in #note-6:
This fails to open the squelch on another radio set to the same tone.
Thanks for the CHIRP image and screen capture. Both the RX and TX tone are set to the same frequency in the image. My guess is that what is being experienced is a bug in the radio. It wouldn't be the first time that I've seen this. You could verify this but programming the same values using the factory software. I am pretty sure that if you download this from your radio to the factory software, you will see that 103.5 will show up for both encode and decode. The if you program a second channel with the same settings and upload it to the radio, it will behave the same on this new channel.
I will attempt to locate my BF-V8 later today to see how it behaves for me.
Jim KC9HI
Updated by Jim Unroe over 1 year ago
- Status changed from New to In Progress
- Assignee set to Jim Unroe
- Target version set to chirp-py3
After digging out my Baofeng BF-V8A I was able to duplicate the issue and figure out what was causing the CTCSS tone to get suppressed. I will be submitting a patch that should solve the problem.
Jim KC9HI
Updated by Anonymous over 1 year ago
- Status changed from In Progress to Closed
- % Done changed from 0 to 100
Applied in changeset github|d81a5d1acc9b758f58ab32a8ce016142d4ac8d03.