Bug #8291
closedRX DTCS Code not saved in export file
0%
Description
If you setup a Cross Tone mode with DTCS -> DTCS the RX DTCS code is NOT SAVED in the channel export file.
When I look at the .CSV file, I don't even see a column for it.
See attachments for screen pic of the channel setup, and my freq. export file.
Freq: 462.625
Mode: Cross
Cross Mode: DTCS->DTCS
DTCS: 306
Rx DTCS: 526 <--- this is the item that is NOT SAVED in the export file
Duplex: +
Offset 5¶
Then export the frequency setup to a CSV file.
Look at the CSV file and you'll see that the RX DTCS setting is NOT SAVED
I have tested this issue on a Baofeng BF-F8HP and UV-5R.
Files
| Screen Shot 2020-09-29 at 5.48.04 PM.png (181 KB) Screen Shot 2020-09-29 at 5.48.04 PM.png | Actual Config screen print showing TX and RX DCTS entries | ||
| Radio_Freq_2020Q3E.csv (7.71 KB) Radio_Freq_2020Q3E.csv | Export file - Look at item 116 - There is no DTCS setting saved |
Updated by Brian Gorgas about 4 years ago
This is for a MAC OS X configuration (not windows)...Sorry ...
Updated by Jim Unroe about 4 years ago
- Status changed from New to Feedback
- Platform changed from Windows to All
Hi Brian,
The CHIRP CSV file format is not designed to support asymmetrical DTCS codes. You must use the native CHIRP Radio Images (*.img) file to store that type data.
Jim KC9HI
Updated by Jim Unroe about 4 years ago
- Status changed from Feedback to Rejected
Duplicate of #8289
Jim KC9HI