Actions
Bug #8289
closedRX DTCS Code not saved in export file
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
09/30/2020
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
(All models)
Platform:
All
I read the instructions above:
Description
If you setup a Cross Tone mode with DTCS -> DTCS the RX DCTS code is NOT SAVED in the channel export file.
When I look at the .CSV file, I don't even see a column for it.
See attachments for screen pic of the channel setup, and my freq. export file.
Freq: 462.625
Mode: Cross
Cross Mode: DTCS->DTCS
DTTS: 306
Rx DTCS: 526 <--- this is the item that is NOT SAVED in the export file
Duplex: +
Offset 5¶
Then export the frequency setup to a CSV file.
Look at the CSV file and you'll see that the RX DTCS setting is NOT SAVED¶
I have tested this issue on a Baofeng BF-F8HP and UV-5R.
Files
| Screen Shot 2020-09-29 at 5.48.04 PM.png (181 KB) Screen Shot 2020-09-29 at 5.48.04 PM.png | Actual Config |
Actions