Bug #7681
openUV-5R Not accepting setting changes
0%
Description
I just received a new UV-5R in the mail and when programming with CHIRP it will accept a new batch of channels correctly but changes in the settings tab aren't carried forward. I haven't tested all of the options, but specifically the welcome message won't change (what downloads also isn't what the radio displays) and I cannot modify the upper and lower VHF/UHF limits. It's currently says 'FCC' on startup and is limited to 144-148/430-450.
Files
Updated by Hazardous Medic over 4 years ago
Forgot to mention in the original post:
Firmware 1: HN5RV01
Firmware 2: 1FB297
Updated by Hazardous Medic over 4 years ago
- File Baofeng_UV-5R_20200306.img Baofeng_UV-5R_20200306.img added
- File debug.log debug.log added
Also, here is the log and img. The frequency range values were correct when downloading from the radio and uploading back, but the radio will not let me input anything outside of 144-148/430-450 no matter what the lower and upper limit settings are.
Updated by Hazardous Medic over 4 years ago
Update - I received a known-good img file from a fellow UV-5R owner and uploaded that to the device. I still can't manually tune outside of the restricted 144-148/430-450 ranges. However, he had frequencies programmed outside of that range (eg. 162.550) and in channel mode I can tune to them and receive transmissions successfully. So it seems like my manual frequency entry is locked out.
Updated by Travis Flaman over 4 years ago
- File Resized_Screenshot_20200316-165437_Drive.jpeg Resized_Screenshot_20200316-165437_Drive.jpeg added
Hazardous Medic wrote:
Update - I received a known-good img file from a fellow UV-5R owner and uploaded that to the device. I still can't manually tune outside of the restricted 144-148/430-450 ranges. However, he had frequencies programmed outside of that range (eg. 162.550) and in channel mode I can tune to them and receive transmissions successfully. So it seems like my manual frequency entry is locked out.
Try going into the radio menu > STEP(frequency Step) > for value switch to 2.5K.
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Model affected changed from UV-5R to Baofeng UV-5R
- Platform changed from Windows to All
Plesase see previous post and tell us whether that worked.