Bug #7633: Cloning from computer to radio Icom IC-2730a - CHIRP

Actions

Copy link

Bug #7633

closed

Cloning from computer to radio Icom IC-2730a

Added by philip willer almost 5 years ago. Updated over 4 years ago.

Status:

Closed

Priority:

Normal

Assignee:

Category:

Target version:

chirp-legacy

Start date:

02/09/2020

Due date:

% Done:

Estimated time:

Chirp Version:

daily

Model affected:

Icom IC-2730A

Platform:

Windows

Debug Log:

I read the instructions above:

Description

Hello. I am working on helping someone with programming his Icom 2730A from computer to radio. What speaker port do you plug the connection in on the radio? Also what is the process to accept the clone from the computer to the radio. Is there a menu function? Button function to get this done. Help with this would be a great help. Got all the frequencies programmed in chirp just need to get them from the computer to radio with the how to do this. Thank you for the help in advance

Actions

Copy link

Updated by Bernhard Hailer almost 5 years ago

Tracker changed from Feature to Bug
Subject changed from Cloning from computer to radio Icom 2730a to Cloning from computer to radio Icom IC-2730a
Status changed from New to Feedback
Target version set to chirp-legacy
Model affected changed from icom 2730A to Icom IC-2730A
Platform set to Windows

You should be able to find out where to plug in your programming cable in the radio's manual, which you can find here: [[[https://www.icomjapan.com/support/?SWT=&ID=20141216001&GNR=Amateur&TYPE=Mobile&PDNM=IC-2730A/IC-2730E&INQWORDSWT=No&INQWORD=]]]. It should also explain how to clone between radios, if this radio supports it.

As for using Chirp, you could proceed as follows:
1) Save (export) your programmed frequencies in Chirp as CSV file.
2) Download an image from your IC-2730A.
3) Import the CSV file you saved in step 1). The data will be added to your downloaded image.
4) Upload the result into your IC-2730A.

Good luck!

Actions

Copy link