Bug #7343
closedUV-82HP
Added by Jason Tallman about 5 years ago. Updated over 4 years ago.
0%
Description
Good Day,
I purchased a Baofeng UV-82HP and I cannot get CHIRP to read the radio. Every time I try to read the radio CHIRP states that the model is not supported. I have tried the baofeng UV-82/ UV-82HP and the Radioddity drivers. The model number under in the radio is NUV82 and firmware is 190831M.
Files
uv-82_NUV82.log (23.2 KB) uv-82_NUV82.log | Michael Ford, 11/30/2019 04:09 PM |
Updated by Terry Kennedy almost 5 years ago
Just registered to note I have the same issue with a new pair of these radios. Same model / firmware as noted in the initial bug report.
Updated by Michael Ford almost 5 years ago
ERROR: ----------------
ERROR: Clone failed: Incorrect 'Model' selected
ERROR: --- Exception Dialog: Incorrect 'Model' selected. ---
ERROR: None
ERROR: ----------------------------
Also just registered to note the same issue; NUV82/190831M - purchased on Amazon:
https://www.amazon.com/gp/product/B07RSWFT2K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Updated by Michael Ford almost 5 years ago
- File uv-82_NUV82.log uv-82_NUV82.log added
Attached debug log.
Updated by Terry Kennedy almost 5 years ago
These are apparently counterfeit and they'll be going back to Amazon shortly. After resetting the radio to defauts with the official program* it now says "BAOFENG UV-5R" at startup instead of WELCOME. It also only does TX power of high and low instead of adding mid like the official radios that came from the Baofeng official store on Amazon. Also the boxes, manual*, etc. are completely different. I also suspect the batteries don't meet the rated capacity either, based on weight.
- Finding any "guaranteed official" software or documentation is incredibly difficult. Eventually I found version 1.7 of their software from 2018 and an English manual for the UV-82 (I couldn't find one for the HP, but I didn't spend a lot of time looking) on their local Chinese B2B site. The software in the links the counterfeiters send out is definitely suspect, and I think some may have percolated through to innocent, well-meaning sites). I'm going to try (most likely unsuccessfully) to get Baofeng to improve their US support site, both by declaring it official and by having up-to-date software. I had heard that the Chinese authorities were starting to crack down on counterfeiters, even if the complaint came from a Chinese company. We'll see.
Updated by Brandon Lee almost 5 years ago
note: Having a similar issue, radio shows the same firmware number but the model number is UV82. Not sold as the HP version. Mine doesnt show any model number on start up however.
Updated by Michael Ford almost 5 years ago
Terry - I assume you purchased the same radio I did off Amazon correct? I'm unable to confirm your findings here as my only method of programing is Chirp (Linux guy, no Mac/Windows in my house), but that looks super suspect and I'd also say it's counterfeit.
I suppose this radio will now be returned to Amazon.
Updated by Terry Kennedy almost 5 years ago
I ordered the package deal, ASIN B07RSWFT2K from seller TIDRADIO Mall, fulfilled by Amazon. The genuine radios I purchased were ASIN B00Z52HP10, seller BaoFeng Tech, fulfilled by Amazon.
Updated by Jim Unroe almost 5 years ago
- Status changed from New to Feedback
These new radios don't report their firmware version to CHIRP. CHIRP uses the firmware version to keep the user from editing the radio with the wrong settings. A patch was just submitted and accepted to all CHIRP to edit these radios even though CHIRP doesn't know for sure the selected model is correct. It will be up to the user to select the correct model.
Look for the "fix" in the next CHIRP daily build.
Jim KC9HI
Updated by Jim Unroe almost 5 years ago
Terry Kennedy wrote:
These are apparently counterfeit and they'll be going back to Amazon shortly.
They are definitely not a UV-82HP from Baofeng Tech (the radio dealer in the USA).
Jim KC9HI
Updated by Bernhard Hailer almost 5 years ago
- Model affected changed from UV-82 to Baofeng UV-82
Has the problem been resolved for you all? Thanks.
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed
- Target version set to chirp-legacy
No more traffic on this ticket.