Project

General

Profile

Actions
Copy link

New Model #6493

closed

Add QYT KT-5800 as a variant of QYT KT-8900D (dual band)

Added by Allen Sizemore almost 6 years ago. Updated almost 4 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Jim Unroe
Category:
-
Target version:
chirp-legacy
Start date:
02/22/2019
Due date:
% Done:

100%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:

Description

THIS IS NOT A BUG

I just didn't know how else to relay this to you. The QYT 5800 works when programming as QYT8900D with one change to the driver.

On the 8900D driver, I had to change out the ID for it to work with Chirp

KT8900D (dual band)

KT8900D_fp1 = "VCB222" #<------THIS ONE IS THE QYT 5800
KT8900D_fp = "VC8632"

Please update the driver so others don't have to spend the 2 hours I did figuring it out.

73!

-KN4PTV

Files

btech_kt5800.py (153 KB) btech_kt5800.py Test driver module for QYT KT-5800 Jim Unroe, 12/25/2020 10:43 AM
Actions
Copy link
 #1

Updated by Bernhard Hailer almost 5 years ago

  • Subject changed from QYT 5800 to Add QYT KT-5800 as a variant of QYT KT-8900D (dual band)
  • Priority changed from Immediate to Normal
  • Target version set to chirp-legacy

Thanks for finding that out! Hopefully this can be added at some point.

Actions
Copy link
 #2

Updated by Jim Unroe almost 4 years ago

I have a patch ready to submit, but I would like it to be tested before I do. Below are the instructions for how to load the attached test driver module for testing.

1 save the test driver module to a convenient location

Note: Do not right click the link to download. Left click the link and choose the "download" link on the page that loads.

2 click "Help" in the menu bar and enable "Enable Developer Functions"
3 click "File" in the menu bar
4 click "Load Module" in the list that appeared and then locate and load the test driver that was saved in step 1

CHIRP will now have a red background. Test to see if you can download from and upload to your radio.

Note: This test driver module does not permanently change your CHIRP installation in any way. If you close CHIRP, you must load this test driver again before you can program your radio.

Let me know the results. If successful, I will submit the patch.

Jim KC9HI

Actions
Copy link
 #3

Updated by Jim Unroe almost 4 years ago

  • Status changed from In Progress to Resolved
  • % Done changed from 0 to 100

Patch submitted. Awaiting approval and inclusion into CHIRP.

Jim KC9HI

Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC