Bug #623
closedYaesu FT-897 Not Downloading
0%
Description
Failed to communicate with radio: Unable to read block 34 expected 142 got 0
Updated by Filippi Marco about 12 years ago
- Status changed from New to Incomplete
- Assignee set to Filippi Marco
- Model affected changed from FT-897 to Most Yaesu
Most probably the radio have not been put to clone please look at #717 for operation sequence
Updated by Steve Pickering about 12 years ago
Sorry Marco, but not the same issue. The radio connects and uploads until it gets to block #34. Then it throws the error as shown ... "Failed to communicate with radio: Unable to read block 34 expected 142 got 0". Prior to that it was reading fine. The error occurs every time.
Updated by Filippi Marco about 12 years ago
- Status changed from Incomplete to In Progress
- Model affected changed from Most Yaesu to Yaesu FT-897
Ok ... will work on this ...
Updated by Steve Pickering about 12 years ago
Problem Solved ...
I downloaded Version 0.3.1 , released on 7-April-2013 and found a selection I had not seen before. Under Yaesu there was a choice between FT857/897 US and FT857/897. The US version did not work. My radio is a Non "D" version and is open. One or the other was the issue apparently, and/or the new version fixed the issue, so if you have a non "D" version or your radio is open, try the FT857/897 selection. All is well and I am working on cloaning (2m 440) now to my FT-7800.
Now if we could get a version for Yaesu FT-51r.
Updated by Filippi Marco about 12 years ago
- Status changed from In Progress to Closed
I'm happy to ear you have been able to solve and I'm sorry for my the delay in following this issue.
For the Yaesu FT-51r please open a new specific issue
73