Bug #6095
closedBaofeng UV-82 HP out of supported range
100%
Description
I am unable to program my 82hp in the 400-520mhz range. When I upload the file from the radio to CHIRP, it shows frequencies in that range. When I try to edit them, it shows "error setting memory:Frequency is out of supported range." I am using the current daily build.
When attempting to program on the radio itself:
In channel mode on the radio, the frequencies in this range are there and work. When I switch to frequency mode, I cannot enter a frequency in this range. Stranger yet, in frequency mode, it will accept frequencies in the 200mhz range. The radio will transmit and receive in this range.
Updated by James Walts over 6 years ago
Solution Found- Somehow the UHF upper and lower limits were set to 200 and 250. I was unable to edit them in chirp. I downloaded the VIP software from Baofeng. I was able to enter the 400mhz frequencies in VIP. I then uploaded to the radio. I then downloaded to chirp. This successfully changed the UHF limits in chirp. The rest of the programming went well.
Updated by Dan Smith almost 6 years ago
- Status changed from New to Closed
- % Done changed from 0 to 100
Applied in changeset commit:bb0d5c6189cc.