Bug #5665
closedCannot program DCS Squelch on Yaesu FT-60r
0%
Description
Can program DCS encode, but do not have the option to program DCS decode/DCS Squelch even though the radio has the capability. I was able to use FT-60 Commander to program the radio with the DCS Squelch I needed, then when I read the radio from Chirp, that channel was blank and showed ERROR.
Updated by Kosta A. over 3 years ago
- Status changed from New to Feedback
- Priority changed from Normal to Low
- Chirp Version changed from 0.4.0 to daily
- Platform changed from Windows to All
Can you provide specific details as to which setting is missing and/or provide an image file which demonstrates the issue? The FT-60 model presently supports DCS.
Updated by Steve Hoffman over 3 years ago
Chirp does have DCS but only for transmit. The FT-60 supports DCS Decode on Receive however there is no way to program it in Chirp. Unless the DTCS setting in Chirp in Transmit and Receive both, but normally they are separate just like regular Tone Squelch.
Updated by Kosta A. over 3 years ago
- Status changed from Feedback to Resolved
- Assignee deleted (
Kosta A.)
My understanding of the FT-60r is that this radio supports a DCS Encoder/Decoder with the ability to set a single DCS Code per memory. Setting the DCS Code is thus applied to both Tx and Rx for this particular model of HT.
There does not appear to be any method in which to separate the DCS Code between Tx and Rx; this is not supported by any documention in the User Manual or any feature of FT-60 Commander; if you have information to the contrary or can upload an image file which demonstrates the ERROR please do so, at which time we can reopen this issue.