Actions
Bug #5023
closedIcom IC-7100 writes wrong repeater offset
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
07/18/2017
Due date:
% Done:
100%
Estimated time:
Chirp Version:
0.4.0
Model affected:
(All models)
Platform:
Windows
I read the instructions above:
Description
It looks like Chirp is writing repeater frequencies for UHF with a 0.6 Mhz offset. Two meter repeaters are OK, but all the UHF repeaters also get a .6 mhz offset.
To test the software, I entered a UHF repeater manually in the radio with a valid 5 Mhz offset. I verified the offset on the manually entered memory was 5 mhz. I downloaded the data from the radio, edited the entry to only add a channel name, and Chirp changed the repeater offset to .6 Mhz offset.
I exported a generic .CSV file, pasted my frequencies and channel names and entered the offsets as 5 for UHF and .6 for VHF repeaters. Once imported all the repeater offsets were .6 mhz.
Files
| Set20171202_01.icf (285 KB) Set20171202_01.icf | ICF | ||
| Screen Shot 2017-12-02 at 3.13.41 PM.png (294 KB) Screen Shot 2017-12-02 at 3.13.41 PM.png | 440.000 picture | ||
| Screen Shot 2017-12-02 at 3.13.49 PM.png (243 KB) Screen Shot 2017-12-02 at 3.13.49 PM.png | 442.700 picture | ||
| ic-7100.csv (918 Bytes) ic-7100.csv | CSV | ||
| imported-radio-ref.csv (7.26 KB) imported-radio-ref.csv |
Actions