Project

General

Profile

Actions

Bug #4295

open

Yaesu VX-8DE: unable to program broadcast AM and FM frequencies

Added by Dmitry M. almost 8 years ago. Updated over 4 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
12/10/2016
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu VX-8
Platform:
All
Debug Log:
I read the instructions above:

Description

After programming TV channel frequencies of the D (Eastern Europe) standard I noticed that I get no sound at 91.75MHz and 99.75MHz which fall on FM broadcast band. Switching the radio to broadcast reception mode (FW + 0/radio keys) gives normal reception.

The radio allows programming AM and FM broadcast frequencies to memory channels.

I started investigating the issue and noticed the following.

  1. FM Broadcast
    The memories generated by the radio are different from that generated by Chirp. When using the Browser (after enabling Developer Functions) the difference is seen in the last three bytes of each memory, those marked as unknown.

  2. AM Broadcast
    Chirp shows error on memory entries generated by the radio and doesn't allow to enter AM broadcast frequencies.

I attached a test memory dump where memories 1-4, 6 were created by the radio and memory 5 was created by Chirp.


Files

Actions

Also available in: Atom PDF