New Model #4219
closedJetstream JT270MH
0%
Description
Seems like the new MH model with the v1.05 firmware doesn't play well with chirp. Reading & writing works fine with the 270M setting but when opening a saved codeplug CHIRP cannot find a model ID. Additionally programming structure must have changed, because when reading the default programming that came with the radio only a few fields are displayed and the programmed channels are not in the correct location.
Attached is the default codeplug that was read with CHIRP. This is a Jetstream JT-270MH running v1.05 firmware.
Files
| default.img (8 KB) default.img | |||
| IMG_4367.JPG (2.67 MB) IMG_4367.JPG | |||
| testing.lx19 (15.7 KB) testing.lx19 |
Updated by Patrick McDonnell over 8 years ago
- File IMG_4367.JPG IMG_4367.JPG added
Attached is the insert paper included in the box that apparently lists the changes in the 1.05 firmware. Take it with a grain of salt as some of the things specified I couldn't get the radio to actually do.
Updated by Patrick McDonnell over 8 years ago
- File testing.lx19 testing.lx19 added
Also attached is the codeplug read with Jet's version 1.07 CPS. Hopefully it'll be useful to figure out what the new codeplug structure looks like.
Updated by Dan Smith over 8 years ago
- Status changed from New to Closed
- Assignee set to Dan Smith
Fixed in r2814