Bug #4135
closedI cannot get CHIRP to work on my newer Windows Laptop
0%
Description
I run Windows 8.1. Please help me.
Updated by Jim Unroe almost 8 years ago
- Status changed from New to Feedback
We need more details. Are there any error messages? Have you disabled "Smartscreen"?
Jim
Updated by Ed Morales almost 8 years ago
Jim Unroe wrote:
We need more details. Are there any error messages? Have you disabled "Smartscreen"?
Jim
Error says it could not open port com 2. I don't know what you mean by smart screen. It also will not let me change the port com #.
Updated by Ryan Tourge almost 8 years ago
The version you are using is several years old. You should try the latest daily build.
Updated by Ed Morales almost 8 years ago
Ryan Tourge wrote:
The version you are using is several years old. You should try the latest daily build.
I downloaded the latest version and it still does not work.
Updated by Jim Unroe almost 8 years ago
Ed Morales wrote:
Jim Unroe wrote:
We need more details. Are there any error messages? Have you disabled "Smartscreen"?
Jim
Error says it could not open port com 2. I don't know what you mean by smart screen. It also will not let me change the port com #.
This error appears to indicate that you are either accessing the wrong com port or a device driver that is compatible with the chip in the programming cable has not been installed (common problem with Windows and Prolific type chips).
Most Prolific type chips are unauthorized copies (counterfeit) and the device driver that is automatically installed is (intentionally) incompatible with these chips. You must download, install and select an older but compatible device driver.
See the "Cables & Drivers":http://www.miklor.com/COM/UV_Drivers.php page on the Miklor website.
Jim
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed
- Priority changed from High to Normal
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
No more traffic on this ticket.