New Model #3709
openBaofeng BF-UV82Max
0%
Description
Brand: Developed by BaoFeng and Coocheer
Model: UV-82 Max
Firmware: N82303
Battery: BL-8 (7.4v 1800Mah/13.3Wh)
Website: [[http://www.ecoocheer.com/product/2016-new-release-baofeng-bf-uv82-max-two-way-radios-140]]
Color: Black
Dimension: 6 x 3.5 x 28.5 cm(L x W x H)
Antenna Length: 17cm
Display: LCD Display
Power: 7W
Voltage: 7.4V
Battery: 1800mAh, 7.4V, Li-ion (Included)
Frequency Range: 65-108MHz (FM Receive only) 136-174MHz(VHF) and 400-520MHz (UHF)
Transmitter Output power: 5W / 1W
Modulation Mode: 16k F3E / 11k F3E
Maximum deviation: <5kHz(Wide) / <2.5kHz(Narrow)
CTCSS/DCS deviation: 0.5+/-0.1kHz(Wide) / 0.3+/-0.1kHz(Narrow)
Intermediation distortion: <10%
This model seems very similar to the BF-UV82HP, but also (supposedly) supports the scramble/beat shift/voice inversion feature, like the BaoFeng BF888S and Pofung GT-1 radios. While most Chirp settings work fine on the BF-UV82Max, +Single PTT+ is broken. Regardless of the CHIRP setting, the radio always uses dual PTT. I am willing to loan a radio for testing so the radio can be fully supported.
Files
| BF-UV82MAX.gif (152 KB) BF-UV82MAX.gif | Very Similar (but not identical to) BaoFeng BF-UV82HP | ||
| Baofeng.UV-82.Max.OEM.img (6.32 KB) Baofeng.UV-82.Max.OEM.img | Baofeng UV-82MAX OEM Image | ||
| hx.img (6.32 KB) hx.img | |||
| BaoFeng.UV82Max.Manual.pdf (2.43 MB) BaoFeng.UV82Max.Manual.pdf | Baofeng UV82-Max Manual |
Updated by Jim Unroe over 8 years ago
- Status changed from New to Feedback
The ability to set the dual [PTT] buttons to behave as a single [PTT] button is a feature that is exclusive to Baofeng Tech radios. It has to be enabled in the firmware. Without it, CHIRP can't make it happen. The same goes for the ability disable VFO/MR switching.
Jim KC9HI
Updated by Jim Unroe over 8 years ago
Did you save a "factory" CHIRP Radio Images (*.img) from this radio? In either case, I would like a copy.
Jim KC9HI
Updated by Jamyn Shanley over 8 years ago
Hey,
Yes, I did save the factory image (attached).
Updated by Jim Unroe over 8 years ago
Jamyn,
Thanks for the image. The scramble setting can most likely be added if you can supply an image with it enabled and another with with it disabled.
Jim KC9HI
Updated by Konrad Tomalski over 8 years ago
I have buy some time age UV-82HX. As I can see he have the same firmware number as UV-82Max. Is there any change to supports the scramble/beat shift/voice inversion feature? Here is the OEM image.
Updated by Jamyn Shanley over 8 years ago
The vendor has not been very helpful; I think the feature list incorrectly lists beat shift/scramble. This particular model appears to be a hybrid between the BaoFeng UV82 and the UV82HP. Single-PTT and beat-shift don't appear functional.
I'm attaching the manual for reference.
Updated by Bernhard Hailer over 4 years ago
- Chirp Version changed from 0.4.0 to daily
Has this been comnpleted?
As for the 82HX, this radio is listed as supported by Chirp.