Feature #2689
closedBaofeng BF-F8HP Rx only feature Request
0%
Description
Hey there.
I know you guys implemented the "Rx only" option for the Baofeng UV5R radio. But I have a Baofeng GT3-TP (that programs with the BF-F8HP option) and I would really like to have the same option. If if exists and I did not found it, my apologize. If it doesn't, I would really realy appreciate it. Should be more or less the same principle as the UV-5R. I would only like to have it on the BF-F8HP radio programming interface.
Thanks a lot for all your support.
Updated by Jim Unroe almost 10 years ago
- Status changed from New to Rejected
The BF-F8HP is a UV-5R with 3 power levels. Everything that CHIRP can program on the UV-5R, CHIRP does for the BF-F8HP. Like the UV-5R (and most other Baofeng models), to disable TX on a channel (thus making it an RX only channel), you set the Duplex field to "off".
The miklor website has these "CHIRP Guides and Examples":http://www.miklor.com/COM/UV_CHIRP.php#guides.
Jim KC9HI
Updated by Rui Oliveira almost 10 years ago
My apologies. I thought "off" was the same as "none". Sorry. My total fault. Thanks for your amazing work.
Jim Unroe wrote:
The BF-F8HP is a UV-5R with 3 power levels. Everything that CHIRP can program on the UV-5R, CHIRP does for the BF-F8HP. Like the UV-5R (and most other Baofeng models), to disable TX on a channel (thus making it an RX only channel), you set the Duplex field to "off".
The miklor website has these "CHIRP Guides and Examples":http://www.miklor.com/COM/UV_CHIRP.php#guides.
Jim KC9HI