Bug #2547
closedBaofeng UV-5R (N5R-2407 BFB297N)
0%
Description
I got a Baofeng UV-5R (N5R-2407 BFB297 N) My problem is there is no "squelch" when I set frequencies in the program : CHIRP.
Can I get a old img.file from you. Then I´ll try to restart the new radio again.
Br.
Arne
Updated by Jim Unroe about 10 years ago
See the "Recovery Using CHIRP Software":http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R page on the "Miklor.com":http://www.miklor.com website for everything that you need.
Jim KC9HI
Updated by luis javier ibañez about 10 years ago
compre un baofeng GT3 MaRK II porque me convencieron y resulta que transmito pero no recibo, intento hacer tutoriales para reiniciar de fabirca pero nada el firware es N5R2407BFB297 , podrian tener un reinicicio de firware porque me meto en ele enlace de abajo y no hay para esta version, me podrias ayudar un saludo y muchas gracias
Updated by luis javier ibañez about 10 years ago
hola conseguiste repararlo me pasa lo mismo que a ti,
Updated by Jim Unroe about 10 years ago
Use the "N5R2401(141006N)(factory).img" with CHIRP Daily-20140714. An error will be reported near the end of the transfer stating that the transfer was stopped because the firmware versions don't match. The part of the file that resets the radios was uploaded successfully so ignore the message.
Jim KC9HI
Updated by Bernhard Hailer about 5 years ago
- Status changed from Incomplete to Closed
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from Baofeng to Baofeng UV-5R
No more feedback by submitter.