Project

General

Profile

Actions

Bug #2303

closed

Yaesu FT-2800M can't read header.

Added by Steven Osborne over 9 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
02/10/2015
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-2800M
Platform:
All
Debug Log:
I read the instructions above:

Description

I have read and tried the solutions found here by reading through some threads. Nothing I have tried has had any success. Here's what I've got:
Programming cable from Valley Enterprises. Additional cable from no-name Chinese manufacturer. Both of these cables successfully read from my radio using G4HFQ software. So I know I am putting the radio in Clone mode correctly and that cable is not the issue. Each and every time I use Chirp, I get the following message: Failed to communicate with radio: Failed to read header
This is the port that shows up in Chirp when I connect my cable: /dev/cu.usbserial-AH02TVBM. I am wondering if I should see "/dev/tty.usbserial-AH02TVBM". I can see this in Terminal, but it does not appear when connecting the cable in Chirp
I am using OSX but have the identical problem in Windows 7. I correctly select the correct COM port, but the error message and symptoms are the same.


Related issues 3 (0 open3 closed)

Has duplicate Bug #2477: Error when reading Yaesu FT-2800MClosed03/31/2015

Actions
Has duplicate Bug #3335: Yaesu FT-2800 can't read headerClosed02/13/2016

Actions
Is duplicate of Bug #3919: Yaesu FT-2800M can't read headerClosed08/13/2016

Actions
Actions #1

Updated by Trevor Jacobs over 5 years ago

Seeing the same problems here. If you wait for like 1 second between hitting OK in chirp and pressing MHz to start the CP download, it sometimes halfway works, but always ends in an error message on the radio.

Actions #2

Updated by Bernhard Hailer over 4 years ago

  • Subject changed from Problem programming Yaesu FT-2800M. Two different cables work with software from another vendor to Yaesu FT-2800M can't read header.
  • Status changed from New to Feedback
  • Target version set to chirp-legacy
  • Chirp Version changed from 0.4.0 to daily
  • Model affected changed from FT-2800M to Yaesu FT-2800M
  • Platform changed from MacOS to All

Has this been resolved by one of the recent daily builds?
(Newer posts suggest that the problem is gone with recent daily builds. Please try again and let us know.)

Actions #3

Updated by Bernhard Hailer over 4 years ago

  • Status changed from Feedback to Closed

No more traffic on this ticket.

Actions

Also available in: Atom PDF