CHIRP

I noticed that this bug has been reported before ans marked as resolved (http://chirp.danplanet.com/issues/100).

Yet, I stumbled on a problem.

I've set split tone for a repeater in a manner that rig sends tone to open repeater but does not expect tone on receive.

I did that this way:

Set RX/TX frequencies for a repeater, then enabled split tone using menu No079, then set split tone to 123.0 Hz using menu No083, and after thet use menu MFe and option ENC to turn Tone on TX (set option to T).

I checked everything works as expected - rig opens repeater and receives it properly. I saved it to memory location 11 named TEST.

Then I tried to download configuration to Chirp. It reported error on that memory location and all values for the record are reset to default.

I also found out that Chirp actually has no options to set split tone in this manner and I guess this is the cause of the problem. It allows setting split as ->Tone but not Tone-> which I actually configured in rig directly.