CHIRP

Using Chirp 0.4.0, trying to load bank selections for the RH side VFO and not the left. Save .img file and re-open it populates the LH side .img file as the RH side (bank-wise).

Started with a clean sheet with 6 frequencies on LH side and 7 frequencies on the RH side.
Go to banks(RH) and select which frequencies to desired banks.
Go to banks(LH) and NO banks are selected.
UPLOAD [Clean Slate UL01]
Radio does not recognize the banks on either LH or RH side.
Close out [Clean Slate UL01] File.
Re-open [Clean Slate UL01] file.
Banks no longer selected in sheets.

DOWNLOAD [Clean Slate DL01]
No banks selected in sheet.

Copied [Clean Slate UL01] to [Clean Slate UL02]
Go to banks(LH) and select which frequencies to desired banks.
Go to banks(RH) and NO banks are selected.
UPLOAD [Clean Slate UL02]
Radio LH side matched [Clean Slate 02].
Radio RH side had no banks.

Cannot seem to use Chirp to program banks on RH side VFO.