Bug #1479
closedWill not program cross DPL on Wouxun KG-UV2D
0%
Description
CHIRP will not program cross DPL (Inverted xmit & Normal rcv into the radio).
I was attempting to program Inverted DPL 223 on Transmit & Normal DPL 306 on Receive.
CHIRP accepts the settings but when sent to the radio the Receive is ok, but the transmit shows "T-DCS OFF" on the radio itself.
When read back to the software from the radio, the setting is as it should be (as was programmed into the radio).
After programming with CHIRP, read radio with factory software & the settings were "Normal DPL 306" on both xmit & receive.
The changes made with CHIRP regarding the cross DPLs were not saved into the radio properly.
Changed to desired settings with factory software & was able to program radio correctly.
When radio was re-read with CHIRP after programming with factory software, settings showed as follows:
"tone mode"= cross, "DTCS Code"= 223, "DTCS rx Code"= 306, "DTCS Pol"= NN, "Cross Mode"= DTCS->DTCS
When attempting to change the "DTCS Pol" to RN & Reprogram with CHIRP, the same problem described in the opening statement occurs.
Files