Actions
Bug #11555
openOnly store in radio the first 20 memories configured
Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
09/20/2024
Due date:
% Done:
0%
Estimated time:
Chirp Version:
next
Model affected:
Yaesu FT-818
Platform:
Windows
I read the instructions above:
Yes
Description
It only stores the first 20 configured channels in the radio's memory, it does not give an error, but it does not store channels from memory 21 onwards.
Files
Actions
#1
Updated by Alvaro Felipe Hernández 2 months ago
- File config.txt config.txt added
- File Yaesu_FT-818_20240905.img Yaesu_FT-818_20240905.img added
- File debug_log.txt debug_log.txt added
[Uploaded from CHIRP next-20240905]
Updated by Dan Smith 2 months ago
Hmm, I assume that if you have a memory in location >20 that changes are seen by the radio, but memories that are blank but you edit in chirp are not seen by the radio?
Assuming so, can you help with the following?
- Pick a memory (>20 of course) that is blank in the radio and chirp
- Capture an image of the radio with chirp
- Set that memory on the radio (try not to make any other changes other than saving that memory)
- Capture another image of the radio with chirp
- Upload both here and tell me which memory channel it is
Actions