New Model #10581
openBaofeng UV-21 PRO
Added by Darrell Wasill over 1 year ago. Updated about 1 year ago.
0%
Description
Likely another edition of the P15UV it would be nice to see this series CHIRP supported as the Abbree software is difficult to use.
Files
BaoFeng-UV-21-Pro-High-Power-Long-Range-Rechargeable-Type-C-Walkie-Talkie-Dual-Band-Two.jpg_640x640.jpg (65.3 KB) BaoFeng-UV-21-Pro-High-Power-Long-Range-Rechargeable-Type-C-Walkie-Talkie-Dual-Band-Two.jpg_640x640.jpg | Product Image | Darrell Wasill, 05/16/2023 10:46 AM | |
Bao21.data (48 KB) Bao21.data | Sample image from P15UV OEM software | Wito Krasnal, 07/14/2023 09:39 AM | |
DSCF9468.jpg (243 KB) DSCF9468.jpg | dimensions compared to Quansheng | Wito Krasnal, 07/14/2023 09:40 AM | |
DSCF9478.jpg (240 KB) DSCF9478.jpg | back | Wito Krasnal, 07/14/2023 09:51 AM | |
Bao-21-2.data (48 KB) Bao-21-2.data | Wito Krasnal, 07/18/2023 09:39 AM | ||
download from radio.pcapng.gz (61.9 KB) download from radio.pcapng.gz | Wito Krasnal, 07/18/2023 09:39 AM | ||
upload to radio.pcapng.gz (187 KB) upload to radio.pcapng.gz | Wito Krasnal, 07/18/2023 09:39 AM | ||
BF_UV21RV2_opened_1280.jpg (267 KB) BF_UV21RV2_opened_1280.jpg | UV-21RV2 opened | Soenke Peters, 12/18/2023 07:33 AM |
Updated by Wito Krasnal over 1 year ago
- File Bao21.data Bao21.data added
- File DSCF9468.jpg DSCF9468.jpg added
- File DSCF9478.jpg DSCF9478.jpg added
Darrell Wasill wrote:
Likely another edition of the P15UV it would be nice to see this series CHIRP supported as the Abbree software is difficult to use.
https://www.aliexpress.us/item/3256805339694455.html
It's really a "UV-21R" with green "PRO" sticker, whatever it means. As probably everyone knows, the "UV Pro series" v1.2.4 software available from Miklor does not recognize this radio. On the other hand, nobody in the internet have yet seen or bought a "real UV-21 Pro" (with GPS etc.). Sample image from P15UV OEM software included, however useless it is. Firmware looks evidently incomplete, lacking separate tail option for repeater, backlight time etc. I believe it a temporary patch. Gossip says firmware is not hardcoded and could be upgraded. I'd rather believe this radio a leaked prototype.
Updated by Wito Krasnal over 1 year ago
- File Bao-21-2.data Bao-21-2.data added
- File download from radio.pcapng.gz download from radio.pcapng.gz added
- File upload to radio.pcapng.gz upload to radio.pcapng.gz added
If anyone is interested, here are wireshark/usbcap captures of data transfer between OEM P15UV software and the UV-21R radio, and the data image used to transfer.
Updated by Soenke Peters about 1 year ago
This radio is a disappointment to me.
The build quality is not too bad with at least some protection efforts against the ingress of dust.
But the transceiver is based on an RD1846 (see https://github.com/ZdenekBrichacek/PCB-2way_Radio-AT1846 for datasheets and programming manual) and the main µC's marking lacks information.
Debugging pins are marked, but did not try.
For disassemply , you have to unscrew the nuts of the antenna connector and the volume potentiometer (pull of knob).
Then remove both Torx T8 screws in the battery compartment.
Carefully open, as the keyboard pcb is attached to the main pcb with a flex ribbon cable.
The two power transistors are thermically coupled to the case with heat-conducting rubber. On my radio, one was slightly off and had indents of the adjacent coil.
I added pictures of the main pcb taken with a flatbed scanner, they are available at https://github.com/speters/BF-UV21R-inside
Web Archive of a programming software is available at https://web.archive.org/web/20220209172045/http://download.abbree.com/P15UV%20CPS.rar
Updated by Wito Krasnal about 1 year ago
for CHIRP support You can try "Baofeng UV-17" setting (not Pro). Works for me, but channel names are still restricted to 6 chars. All global settings available. Indeed the radio is a disappointment, the only one I regret buying. Still waiting for eventual firmware update, but probably in vain.
Updated by Dan East about 1 year ago
The "Baofeng UV-17Pro" model works fine for me, and does support the longer channel names. I'm not sure why Wito Krasnal above is using the non-pro UV-17, as that limits the channel name lengths.