Bug #10388
closedBaofeng GMRS-9R
100%
Description
Hi, I have Baofeng GMRS-9R and as per my understanding I have to select the UV-9G (I also own the UV-9G and have same issue). In the DIY Channels I have tried to frequency 443.5000 and some others and I get a warning: Duplex must be "off" for this frequency. I am not sure how I can program some repeaters that I want to use if I cant enter the offset. Any help would be appreciated and or feedback, maybe I should purchase another radio as this might not support this. Thank you in advanced for any help and or guidance towards my issue.
Files
Updated by Jim Unroe almost 2 years ago
This is not a bug. These GMRS radios are limited to transmitting on GMRS frequencies. 443.500 MHz is a ham frequency so since TX is disabled in the radio, CHIRP sets it to disabled to match.
Jim KC9HI
Updated by Ron Kimball over 1 year ago
The GMRS-9R is NOT locked out of transmitting on ham frequencies - only the available programming software enforces it. In developer mode I was able to tweak the UV-9G img file and upload it to the radio and it transmits just fine on 2M and 70 cm. Huge PITA though - sure would be nice if the UV-9G CHIRP whatever didn't try to lock us out of doing that :'-( .
Updated by Jim Unroe over 1 year ago
- File baofeng_uv-9g_full_band.py baofeng_uv-9g_full_band.py added
- Status changed from New to In Progress
- Assignee set to Jim Unroe
- Target version set to chirp-py3
- Model affected changed from UV-9R / GMRS-9R to UV-9G / GMRS-9R
Give this test driver module a try. Here is how: LoadingTestModules
Jim KC9HI
Updated by Jim Unroe over 1 year ago
- Status changed from In Progress to Resolved
- % Done changed from 0 to 100
A patch has been submitted. Support will be in the next CHIRP build following acceptance.
Jim KC9HI