Project

General

Profile

New Model #10648 » baofeng_uv17Pro.py

Added all the basic settings and renamed the setting tabs - Sander van der Wel, 10/17/2023 01:59 PM

 
# Copyright 2023:
# * Sander van der Wel, <svdwel@icloud.com>
# this software is a modified version of the boafeng driver by:
# * Jim Unroe KC9HI, <rock.unroe@gmail.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

import logging

from chirp import chirp_common, directory, memmap
from chirp import bitwise
from chirp.settings import RadioSettingGroup, RadioSetting, \
RadioSettingValueBoolean, RadioSettingValueList, \
RadioSettingValueString, RadioSettingValueInteger, \
RadioSettingValueFloat, RadioSettings, \
InvalidValueError, RadioSettingValue
import time
import struct
import logging
from chirp import errors, util

LOG = logging.getLogger(__name__)

# #### MAGICS #########################################################

# Baofeng UV-17L magic string
MSTRING_UV17L = b"PROGRAMBFNORMALU"
MSTRING_UV17PROGPS = b"PROGRAMCOLORPROU"

DTMF_CHARS = "0123456789 *#ABCD"
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 20.0, 25.0, 50.0]

LIST_AB = ["A", "B"]
LIST_ALMOD = ["Site", "Tone", "Code"]
LIST_BANDWIDTH = ["Wide", "Narrow"]
LIST_COLOR = ["Off", "Blue", "Orange", "Purple"]
LIST_DTMFSPEED = ["%s ms" % x for x in [50, 100, 200, 300, 500]]
LIST_HANGUPTIME = ["%s s" % x for x in [3, 4, 5, 6, 7, 8, 9, 10]]
LIST_SIDE_TONE = ["Off", "Side Key", "ID", "Side + ID"]
LIST_DTMFST = ["Off", "DT-ST", "ANI-ST", "DT+ANI"]
LIST_MODE = ["Name", "Frequency", "Channel Number"]
LIST_OFF1TO5 = ["Off"] + list("12345")
LIST_OFF1TO9 = LIST_OFF1TO5 + list("6789")
LIST_OFF1TO10 = LIST_OFF1TO9 + ["10"]
LIST_OFFAB = ["Off"] + LIST_AB
LIST_RESUME = ["TO", "CO", "SE"]
LIST_PONMSG = ["Full", "Message"]
LIST_PTTID = ["Off", "BOT", "EOT", "Both"]
LIST_SCODE = ["%s" % x for x in range(1, 21)]
LIST_RPSTE = ["Off"] + ["%s" % x for x in range(1, 11)]
LIST_SAVE = ["Off", "1:1", "1:2", "1:3", "1:4"]
LIST_SHIFTD = ["Off", "+", "-"]
LIST_STEDELAY = ["Off"] + ["%s ms" % x for x in range(100, 1100, 100)]
LIST_STEP = [str(x) for x in STEPS]
LIST_TIMEOUT = ["Off"] + ["%s sec" % x for x in range(15, 195, 15)]
LIST_TIMEOUT_ALARM = ["Off"] + ["%s sec" % x for x in range(1, 11)]
LIST_PILOT_TONE = ["1000 Hz", "1450 Hz", "1750 Hz", "2100 Hz"]
LIST_TXPOWER = ["High", "Low"]
LIST_VOICE = ["Off", "English", "Chinese"]
LIST_WORKMODE = ["Frequency", "Channel"]
LIST_POWERON_DISPLAY_TYPE = ["LOGO", "BATT voltage"]
LIST_BEEP = ["Off", "Beep", "Voice", "Both"]
LIST_LANGUAGE = ["English", "Chinese"]
LIST_SCANMODE = ["Time", "Carrier", "Search"]
LIST_ALARMMODE = ["Local", "Send Tone", "Send Code"]
LIST_MENU_QUIT_TIME = ["%s sec" % x for x in range(5, 65, 5)]
LIST_BACKLIGHT_TIMER = ["Always On"] + ["%s sec" % x for x in range(5, 25, 5)]
LIST_ID_DELAY = ["%s ms" % x for x in range(0, 1600, 100)]
LIST_QT_SAVEMODE = ["Both", "RX", "TX"]
LIST_SKEY2_SHORT =["FM", "Scan", "Search", "Vox"]
LIST_RPT_TAIL_CLEAR = ["%s ms" % x for x in range(0, 1100, 100)]
LIST_VOX_DELAY_TIME = ["%s ms" % x for x in range(500, 2100, 100)]
LIST_VOX_LEVEL = ["Off"] + ["%s" % x for x in range(1, 10, 1)]
LIST_VOX_LEVEL_ALT = ["%s" % x for x in range(1, 10, 1)]
LIST_GPS_MODE = ["GPS", "Beidou", "GPS + Beidou"]
LIST_GPS_TIMEZONE = ["%s" % x for x in range(-12, 13, 1)]

TXP_CHOICES = ["High", "Low"]
TXP_VALUES = [0x00, 0x02]

STIMEOUT = 1.5

def model_match(cls, data):
"""Match the opened image to the correct version"""
return data[cls.MEM_TOTAL:] == bytes(cls.MODEL, 'utf-8')

def _crypt(symbolIndex, buffer):
#Some weird encryption is used. From the table below, we only use "CO 7".
tblEncrySymbol = [b"BHT ", b"CO 7", b"A ES", b" EIY", b"M PQ",
b"XN Y", b"RVB ", b" HQP", b"W RC", b"MS N",
b" SAT", b"K DH", b"ZO R", b"C SL", b"6RB ",
b" JCG", b"PN V", b"J PK", b"EK L", b"I LZ"]
tblEncrySymbols = tblEncrySymbol[symbolIndex]
decBuffer=b""
index1 = 0
for index2 in range(len(buffer)):
if ((tblEncrySymbols[index1] != 32) & (buffer[index2] != 0) & (buffer[index2] != 255) &
(buffer[index2] != tblEncrySymbols[index1]) & (buffer[index2] != (tblEncrySymbols[index1] ^ 255))):
decByte = buffer[index2] ^ tblEncrySymbols[index1]
decBuffer += decByte.to_bytes(1, 'big')
else:
decBuffer += buffer[index2].to_bytes(1, 'big')
index1 = (index1 + 1) % 4
return decBuffer

def _clean_buffer(radio):
radio.pipe.timeout = 0.005
junk = radio.pipe.read(256)
radio.pipe.timeout = STIMEOUT
if junk:
LOG.debug("Got %i bytes of junk before starting" % len(junk))


def _rawrecv(radio, amount):
"""Raw read from the radio device"""
data = ""
try:
data = radio.pipe.read(amount)
except:
msg = "Generic error reading data from radio; check your cable."
raise errors.RadioError(msg)

if len(data) != amount:
msg = "Error reading data from radio: not the amount of data we want."
raise errors.RadioError(msg)

return data


def _rawsend(radio, data):
"""Raw send to the radio device"""
try:
#print(data)
#print(radio)
radio.pipe.write(data)
except:
raise errors.RadioError("Error sending data to radio")

def _make_read_frame(addr, length):
"""Pack the info in the header format"""
frame = _make_frame(b"\x52", addr, length)
# Return the data

return frame

def _make_frame(cmd, addr, length, data=""):
"""Pack the info in the header format"""
frame = cmd+struct.pack(">i",addr)[2:]+struct.pack("b", length)
# add the data if set
if len(data) != 0:
frame += data
# return the data
return frame


def _recv(radio, addr, length):
"""Get data from the radio """
# read 4 bytes of header
hdr = _rawrecv(radio, 4)

# read data
data = _rawrecv(radio, length)

# DEBUG
LOG.info("Response:")
LOG.debug(util.hexprint(hdr + data))

c, a, l = struct.unpack(">BHB", hdr)
if a != addr or l != length or c != ord("X"):
LOG.error("Invalid answer for block 0x%04x:" % addr)
LOG.debug("CMD: %s ADDR: %04x SIZE: %02x" % (c, a, l))
raise errors.RadioError("Unknown response from the radio")

return data


def _get_radio_firmware_version(radio):
# There is a problem in new radios where a different firmware version is
# received when directly reading a single block as compared to what is
# received when reading sequential blocks. This causes a mismatch between
# the image firmware version and the radio firmware version when uploading
# an image that came from the same radio. The workaround is to read 1 or
# more consecutive blocks prior to reading the block with the firmware
# version.
#
# Read 2 consecutive blocks to get the radio firmware version.
for addr in range(0x1E80, 0x1F00, radio._recv_block_size):
frame = _make_frame("S", addr, radio._recv_block_size)

# sending the read request
_rawsend(radio, frame)

if radio._ack_block and addr != 0x1E80:
ack = _rawrecv(radio, 1)
if ack != b"\x06":
raise errors.RadioError(
"Radio refused to send block 0x%04x" % addr)

# now we read
block = _recv(radio, addr, radio._recv_block_size)

_rawsend(radio, b"\x06")
time.sleep(0.05)

# get firmware version from the last block read
version = block[48:64]
return version


def _image_ident_from_data(data, start, stop):
return data[start:stop]


def _get_image_firmware_version(radio):
return _image_ident_from_data(radio.get_mmap(), radio._fw_ver_start,
radio._fw_ver_start + 0x10)

def _sendmagic(radio, magic, response):
_rawsend(radio, magic)
ack = _rawrecv(radio, len(response))
if ack != response:
if ack:
LOG.debug(repr(ack))
raise errors.RadioError("Radio did not respond to enter read mode")
def _do_ident(radio):
"""Put the radio in PROGRAM mode & identify it"""
radio.pipe.baudrate = radio.BAUDRATE
radio.pipe.parity = "N"
radio.pipe.timeout = STIMEOUT

# Flush input buffer
_clean_buffer(radio)

# Ident radio
magic = radio._magic
_rawsend(radio, magic)
ack = _rawrecv(radio, radio._magic_response_length)

if not ack.startswith(radio._fingerprint):
if ack:
LOG.debug(repr(ack))
raise errors.RadioError("Radio did not respond as expected (A)")

return True


def _ident_radio(radio):
for magic in radio._magic:
error = None
try:
data = _do_ident(radio, magic)
return data
except errors.RadioError as e:
print(e)
error = e
time.sleep(2)
if error:
raise error
raise errors.RadioError("Radio did not respond")


def _download(radio):
"""Get the memory map"""

# Put radio in program mode and identify it
_do_ident(radio)
for index in range(len(radio._magics)):
_rawsend(radio, radio._magics[index])
_rawrecv(radio, radio._magicResponseLengths[index])

data = b""

# UI progress
status = chirp_common.Status()
status.cur = 0
status.max = radio.MEM_TOTAL // radio.BLOCK_SIZE
status.msg = "Cloning from radio..."
radio.status_fn(status)

for i in range(len(radio.MEM_SIZES)):
MEM_SIZE = radio.MEM_SIZES[i]
MEM_START = radio.MEM_STARTS[i]
for addr in range(MEM_START, MEM_START + MEM_SIZE, radio.BLOCK_SIZE):
frame = _make_read_frame(addr, radio.BLOCK_SIZE)
# DEBUG
LOG.debug("Frame=" + util.hexprint(frame))

# Sending the read request
_rawsend(radio, frame)

# Now we read data
d = _rawrecv(radio, radio.BLOCK_SIZE + 4)

LOG.debug("Response Data= " + util.hexprint(d))
d = _crypt(1, d[4:])

# Aggregate the data
data += d

# UI Update
status.cur = len(data) // radio.BLOCK_SIZE
status.msg = "Cloning from radio..."
radio.status_fn(status)
data += bytes(radio.MODEL, 'utf-8')
return data

def _upload(radio):
# Put radio in program mode and identify it
_do_ident(radio)
for index in range(len(radio._magics)):
_rawsend(radio, radio._magics[index])
_rawrecv(radio, radio._magicResponseLengths[index])

data = b""

# UI progress
status = chirp_common.Status()
status.cur = 0
status.max = radio.MEM_TOTAL // radio.BLOCK_SIZE
status.msg = "Cloning from radio..."
radio.status_fn(status)

data_addr = 0x00
for i in range(len(radio.MEM_SIZES)):
MEM_SIZE = radio.MEM_SIZES[i]
MEM_START = radio.MEM_STARTS[i]
for addr in range(MEM_START, MEM_START + MEM_SIZE, radio.BLOCK_SIZE):
data = radio.get_mmap()[data_addr:data_addr + radio.BLOCK_SIZE]
data = _crypt(1, data)
data_addr += radio.BLOCK_SIZE

frame = _make_frame(b"W", addr, radio.BLOCK_SIZE, data)
# DEBUG
LOG.debug("Frame=" + util.hexprint(frame))
#print()
#print(hex(data_addr))
#print(util.hexprint(frame))

# Sending the read request
_rawsend(radio, frame)

# receiving the response
ack = _rawrecv(radio, 1)
#ack = b"\x06"
if ack != b"\x06":
msg = "Bad ack writing block 0x%04x" % addr
raise errors.RadioError(msg)

# UI Update
status.cur = data_addr // radio.BLOCK_SIZE
status.msg = "Cloning to radio..."
radio.status_fn(status)
data += bytes(radio.MODEL, 'utf-8')
return data


def _split(rf, f1, f2):
"""Returns False if the two freqs are in the same band (no split)
or True otherwise"""

# determine if the two freqs are in the same band
for low, high in rf.valid_bands:
if f1 >= low and f1 <= high and \
f2 >= low and f2 <= high:
# if the two freqs are on the same Band this is not a split
return False

# if you get here is because the freq pairs are split
return True

@directory.register
class UV17Pro(chirp_common.CloneModeRadio,
chirp_common.ExperimentalRadio):
"""Baofeng UV-17Pro"""
VENDOR = "Baofeng"
MODEL = "UV-17Pro"
NEEDS_COMPAT_SERIAL = False

MEM_STARTS = [0x0000, 0x9000, 0xA000, 0xD000]
MEM_SIZES = [0x8040, 0x0040, 0x02C0, 0x0040]

MEM_TOTAL = 0x8380
BLOCK_SIZE = 0x40
STIMEOUT = 2
BAUDRATE = 115200

_gmrs = False
_bw_shift = False
_support_banknames = False

_tri_band = True
_fileid = []
_magic = MSTRING_UV17L
_magic_response_length = 1
_fingerprint = b"\x06"
_magics = [b"\x46", b"\x4d", b"\x53\x45\x4E\x44\x21\x05\x0D\x01\x01\x01\x04\x11\x08\x05\x0D\x0D\x01\x11\x0F\x09\x12\x09\x10\x04\x00"]
_magicResponseLengths = [16, 15, 1]
_fw_ver_start = 0x1EF0
_recv_block_size = 0x40
_mem_size = MEM_TOTAL
_ack_block = True
_aniid = True
_vfoscan = False
_has_gps = False
_voxsw = False
_pilot_tone = False
_send_id_delay = False
_skey2_short = False

MODES = ["NFM", "FM"]
VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \
"!@#$%^&*()+-=[]:\";'<>?,./"
LENGTH_NAME = 12
SKIP_VALUES = ["", "S"]
DTCS_CODES = tuple(sorted(chirp_common.DTCS_CODES + (645,)))
RXTX_CODES = ('Off', )
for code in chirp_common.TONES:
RXTX_CODES = (RXTX_CODES + (str(code), ))
for code in DTCS_CODES:
RXTX_CODES = (RXTX_CODES + ('D' + str(code) + 'N', ))
for code in DTCS_CODES:
RXTX_CODES = (RXTX_CODES + ('D' + str(code) + 'I', ))
POWER_LEVELS = [chirp_common.PowerLevel("High", watts=5.00),
chirp_common.PowerLevel("Low", watts=1.00)]
_airband = (108000000, 136000000)
_vhf_range = (136000000, 174000000)
_vhf2_range = (200000000, 260000000)
_uhf_range = (400000000, 520000000)
_uhf2_range = (350000000, 390000000)

VALID_BANDS = [_vhf_range, _vhf2_range,
_uhf_range]
PTTID_LIST = LIST_PTTID
SCODE_LIST = LIST_SCODE

MEM_FORMAT = """
#seekto 0x0000;
struct {
lbcd rxfreq[4];
lbcd txfreq[4];
ul16 rxtone;
ul16 txtone;
u8 scode:8;
u8 pttid:8;
u8 lowpower:8;
u8 unknown1:1,
wide:1,
sqmode:2,
bcl:1,
scan:1,
unknown2:1,
fhss:1;
u8 unknown3:8;
u8 unknown4:8;
u8 unknown5:8;
u8 unknown6:8;
char name[12];
} memory[1000];

#seekto 0x8080;
struct {
u8 code[5];
u8 unknown[1];
u8 unused1:6,
aniid:2;
u8 dtmfon;
u8 dtmfoff;
} ani;

#seekto 0x80A0;
struct {
u8 code[5];
u8 name[10];
u8 unused:8;
} pttid[20];

#seekto 0x8280;
struct {
char name1[12];
u32 unknown1;
char name2[12];
u32 unknown2;
char name3[12];
u32 unknown3;
char name4[12];
u32 unknown4;
char name5[12];
u32 unknown5;
char name6[12];
u32 unknown6;
char name7[12];
u32 unknown7;
char name8[12];
u32 unknown8;
char name9[12];
u32 unknown9;
char name10[12];
u32 unknown10;
} bank_names;

struct vfo {
u8 freq[8];
ul16 rxtone;
ul16 txtone;
u8 unknown0;
u8 bcl;
u8 sftd:3,
scode:5;
u8 unknown1;
u8 lowpower;
u8 unknown2:1,
wide:1,
unknown3:5,
fhss:1;
u8 unknown4;
u8 step;
u8 offset[6];
u8 unknown5[2];
u8 sqmode;
u8 unknown6[3];
};

#seekto 0x8000;
struct {
struct vfo a;
struct vfo b;
} vfo;

#seekto 0x8040;
struct {
u8 squelch;
u8 savemode;
u8 vox;
u8 backlight;
u8 dualstandby;
u8 tot;
u8 beep;
u8 voicesw;
u8 voice;
u8 sidetone;
u8 scanmode;
u8 pttid;
u8 pttdly;
u8 chadistype;
u8 chbdistype;
u8 bcl;
u8 autolock;
u8 alarmmode;
u8 alarmtone;
u8 unknown1;
u8 tailclear;
u8 rpttailclear;
u8 rpttaildet;
u8 roger;
u8 unknown2;
u8 fmenable;
u8 chaworkmode:4,
chbworkmode:4;
u8 keylock;
u8 powerondistype;
u8 tone;
u8 unknown4[2];
u8 voxdlytime;
u8 menuquittime;
u8 unknown5[6];
u8 totalarm;
u8 unknown6[2];
u8 ctsdcsscantype;
ul16 vfoscanmin;
ul16 vfoscanmax;
u8 gpsw;
u8 gpsmode;
u8 unknown7[2];
u8 key2short;
u8 unknown8[2];
u8 rstmenu;
u8 unknown9;
u8 hangup;
u8 voxsw;
u8 gpstimezone;
} settings;
"""

@classmethod
def get_prompts(cls):
rp = chirp_common.RadioPrompts()
rp.experimental = \
('This driver is a beta version.\n'
'\n'
'Please save an unedited copy of your first successful\n'
'download to a CHIRP Radio Images(*.img) file.'
)
rp.pre_download = _(
"Follow these instructions to download your info:\n"
"1 - Turn off your radio\n"
"2 - Connect your interface cable\n"
"3 - Turn on your radio\n"
"4 - Do the download of your radio data\n")
rp.pre_upload = _(
"Follow this instructions to upload your info:\n"
"1 - Turn off your radio\n"
"2 - Connect your interface cable\n"
"3 - Turn on your radio\n"
"4 - Do the upload of your radio data\n")
return rp

def process_mmap(self):
"""Process the mem map into the mem object"""
if (len(self._mmap) == self.MEM_TOTAL) or (len(self._mmap) == self.MEM_TOTAL + len(self.MODEL)):
self._memobj = bitwise.parse(self.MEM_FORMAT, self._mmap)
else:
raise errors.ImageDetectFailed('Image length mismatch.\nTry reloading the configuration'
' from the radio.')

def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
bank = RadioSettingGroup("bank", "Bank names")
work = RadioSettingGroup("work", "VFO Mode Settings")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
top = RadioSettings(basic, bank, work, dtmfe)
if _mem.settings.squelch > 0x05:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting("settings.squelch", "Squelch",
RadioSettingValueList(
LIST_OFF1TO5, LIST_OFF1TO5[val]))
basic.append(rs)

rs = RadioSetting("settings.tot", "Timeout Timer",
RadioSettingValueList(
LIST_TIMEOUT, LIST_TIMEOUT[_mem.settings.tot]))
basic.append(rs)

rs = RadioSetting("settings.savemode", "Save Mode",
RadioSettingValueBoolean(_mem.settings.savemode))
basic.append(rs)

rs = RadioSetting("settings.totalarm", "Timeout Timer Alarm",
RadioSettingValueList(
LIST_TIMEOUT_ALARM, LIST_TIMEOUT_ALARM[_mem.settings.totalarm]))
basic.append(rs)

rs = RadioSetting("settings.dualstandby", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.dualstandby))
basic.append(rs)

if self._pilot_tone:
rs = RadioSetting("settings.tone", "Pilot Tone",
RadioSettingValueList(
LIST_PILOT_TONE, LIST_PILOT_TONE[_mem.settings.tone]))
basic.append(rs)

rs = RadioSetting("settings.sidetone", "Side Tone",
RadioSettingValueList(
LIST_SIDE_TONE, LIST_SIDE_TONE[_mem.settings.sidetone]))
basic.append(rs)

rs = RadioSetting("settings.tailclear", "Tail Clear",
RadioSettingValueBoolean(_mem.settings.tailclear))
basic.append(rs)

rs = RadioSetting("settings.powerondistype", "Power On Display Type",
RadioSettingValueList(
LIST_POWERON_DISPLAY_TYPE, LIST_POWERON_DISPLAY_TYPE[_mem.settings.powerondistype]))
basic.append(rs)

rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueList(
LIST_BEEP, LIST_BEEP[_mem.settings.beep]))
basic.append(rs)

rs = RadioSetting("settings.roger", "Roger",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)

rs = RadioSetting("settings.voice", "Language",
RadioSettingValueList(
LIST_LANGUAGE, LIST_LANGUAGE[_mem.settings.voice]))
basic.append(rs)

rs = RadioSetting("settings.voicesw", "Enable Voice",
RadioSettingValueBoolean(_mem.settings.voicesw))
basic.append(rs)

rs = RadioSetting("settings.scanmode", "Scan Mode",
RadioSettingValueList(
LIST_SCANMODE, LIST_SCANMODE[_mem.settings.scanmode]))
basic.append(rs)

rs = RadioSetting("settings.alarmmode", "Alarm Mode",
RadioSettingValueList(
LIST_ALARMMODE, LIST_ALARMMODE[_mem.settings.alarmmode]))
basic.append(rs)

rs = RadioSetting("settings.alarmtone", "Sound Alarm",
RadioSettingValueBoolean(_mem.settings.alarmtone))
basic.append(rs)

rs = RadioSetting("settings.keylock", "Key Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
basic.append(rs)

rs = RadioSetting("settings.fmenable", "Disable FM radio",
RadioSettingValueBoolean(_mem.settings.fmenable))
basic.append(rs)

rs = RadioSetting("settings.autolock", "Key Auto Lock",
RadioSettingValueBoolean(_mem.settings.autolock))
basic.append(rs)

rs = RadioSetting("settings.menuquittime", "Menu Quit Timer",
RadioSettingValueList(
LIST_MENU_QUIT_TIME, LIST_MENU_QUIT_TIME[_mem.settings.menuquittime]))
basic.append(rs)

rs = RadioSetting("settings.backlight", "Backlight Timer",
RadioSettingValueList(
LIST_BACKLIGHT_TIMER, LIST_BACKLIGHT_TIMER[_mem.settings.backlight]))
basic.append(rs)

if self._send_id_delay:
rs = RadioSetting("settings.pttdly", "Send ID Delay",
RadioSettingValueList(
LIST_ID_DELAY, LIST_ID_DELAY[_mem.settings.pttdly]))
basic.append(rs)

rs = RadioSetting("settings.ctsdcsscantype", "QT Save Mode",
RadioSettingValueList(
LIST_QT_SAVEMODE, LIST_QT_SAVEMODE[_mem.settings.ctsdcsscantype]))
basic.append(rs)

def getKey2shortIndex(value):
if value == 0x07:
return 0
if value == 0x1C:
return 1
if value == 0x1D:
return 2
if value == 0x2D:
return 3
return 0
def apply_Key2short(setting, obj):
val = str(setting.value)
if val == "FM":
obj.key2short = 0x07
if val == "Scan":
obj.key2short = 0x1C
if val == "Search":
obj.key2short = 0x1D
if val == "Vox":
obj.key2short = 0x2D

if self._skey2_short:
rs = RadioSetting("settings.key2short", "Skey2 Short",
RadioSettingValueList(
LIST_SKEY2_SHORT, LIST_SKEY2_SHORT[getKey2shortIndex(_mem.settings.key2short)]))
rs.set_apply_callback(apply_Key2short, _mem.settings)
basic.append(rs)

rs = RadioSetting("settings.chadistype", "Channel A display type",
RadioSettingValueList(
LIST_MODE, LIST_MODE[_mem.settings.chadistype]))
basic.append(rs)

rs = RadioSetting("settings.chaworkmode", "Channel A work mode",
RadioSettingValueList(
LIST_WORKMODE, LIST_WORKMODE[_mem.settings.chaworkmode]))
basic.append(rs)

rs = RadioSetting("settings.chbdistype", "Channel B display type",
RadioSettingValueList(
LIST_MODE, LIST_MODE[_mem.settings.chbdistype]))
basic.append(rs)

rs = RadioSetting("settings.chbworkmode", "Channel B work mode",
RadioSettingValueList(
LIST_WORKMODE, LIST_WORKMODE[_mem.settings.chbworkmode]))
basic.append(rs)

rs = RadioSetting("settings.rpttailclear", "Rpt Tail Clear",
RadioSettingValueList(
LIST_RPT_TAIL_CLEAR, LIST_RPT_TAIL_CLEAR[_mem.settings.rpttailclear]))
basic.append(rs)

rs = RadioSetting("settings.rpttaildet", "Rpt Tail Delay",
RadioSettingValueList(
LIST_RPT_TAIL_CLEAR, LIST_RPT_TAIL_CLEAR[_mem.settings.rpttaildet]))
basic.append(rs)

rs = RadioSetting("settings.rstmenu", "Enable Menu Rst",
RadioSettingValueBoolean(_mem.settings.rstmenu))
basic.append(rs)

if self._voxsw:
rs = RadioSetting("settings.voxsw", "Vox Switch",
RadioSettingValueBoolean(_mem.settings.voxsw))
basic.append(rs)

rs = RadioSetting("settings.vox", "Vox Level",
RadioSettingValueList(
LIST_VOX_LEVEL_ALT, LIST_VOX_LEVEL_ALT[_mem.settings.vox]))
basic.append(rs)
else:
rs = RadioSetting("settings.vox", "Vox Level",
RadioSettingValueList(
LIST_VOX_LEVEL, LIST_VOX_LEVEL[_mem.settings.vox]))
basic.append(rs)

rs = RadioSetting("settings.voxdlytime", "Vox Delay Time",
RadioSettingValueList(
LIST_VOX_DELAY_TIME, LIST_VOX_DELAY_TIME[_mem.settings.voxdlytime]))
basic.append(rs)

if self._has_gps:
rs = RadioSetting("settings.gpsw", "GPS On",
RadioSettingValueBoolean(_mem.settings.gpsw))
basic.append(rs)
rs = RadioSetting("settings.gpsmode", "GPS Mode",
RadioSettingValueList(
LIST_GPS_MODE, LIST_GPS_MODE[_mem.settings.gpsmode]))
basic.append(rs)

rs = RadioSetting("settings.gpstimezone", "GPS Timezone",
RadioSettingValueList(
LIST_GPS_TIMEZONE, LIST_GPS_TIMEZONE[_mem.settings.gpstimezone]))
basic.append(rs)

def _filterName(name, zone):
fname = ""
charset=chirp_common.CHARSET_ASCII
for char in name:
if ord(str(char)) == 255:
break
if str(char) not in charset:
char = "X"
fname += str(char)
if fname == "XXXXXX":
fname = "ZONE" + zone
return fname
if self._support_banknames:
_zone="01"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name1", "Bank name 1",
RadioSettingValueString(
0, 12, _filterName(_msg.name1, _zone)))
bank.append(rs)

_zone="02"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name2", "Bank name 2",
RadioSettingValueString(
0, 12, _filterName(_msg.name2, _zone)))
bank.append(rs)
_zone="03"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name3", "Bank name 3",
RadioSettingValueString(
0, 12, _filterName(_msg.name3, _zone)))
bank.append(rs)

_zone="04"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name4", "Bank name 4",
RadioSettingValueString(
0, 12, _filterName(_msg.name4, _zone)))
bank.append(rs)

_zone="05"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name5", "Bank name 5",
RadioSettingValueString(
0, 12, _filterName(_msg.name5, _zone)))
bank.append(rs)

_zone="06"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name6", "Bank name 6",
RadioSettingValueString(
0, 12, _filterName(_msg.name6, _zone)))
bank.append(rs)

_zone="07"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name7", "Bank name 7",
RadioSettingValueString(
0, 12, _filterName(_msg.name7, _zone)))
bank.append(rs)

_zone="08"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name8", "Bank name 8",
RadioSettingValueString(
0, 12, _filterName(_msg.name8, _zone)))
bank.append(rs)

_zone="09"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name9", "Bank name 9",
RadioSettingValueString(
0, 12, _filterName(_msg.name9, _zone)))
bank.append(rs)

_zone="10"
_msg = _mem.bank_names
rs = RadioSetting("bank_names.name10", "Bank name 10",
RadioSettingValueString(
0, 12, _filterName(_msg.name10, _zone)))
bank.append(rs)

_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)

# DTMF settings
def apply_code(setting, obj, length):
code = []
for j in range(0, length):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code

for i in range(0, 20):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
pttid = RadioSetting("pttid/%i.code" % i,
"Signal Code %i" % (i + 1), val)
pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)
dtmfe.append(pttid)

if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED,
LIST_DTMFSPEED[val]))
dtmfe.append(rs)

if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED,
LIST_DTMFSPEED[val]))
dtmfe.append(rs)

_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
rs.set_apply_callback(apply_code, self._memobj.ani, 5)
dtmfe.append(rs)

if self._aniid:
rs = RadioSetting("ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID,
LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)

rs = RadioSetting("settings.hangup", "Hang-up time",
RadioSettingValueList(LIST_HANGUPTIME,
LIST_HANGUPTIME[_mem.settings.hangup]))
dtmfe.append(rs)

def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)

def my_validate(value):
value = chirp_common.parse_freq(value)
freqOk = False
for band in self.VALID_BANDS:
if value > band[0] and value < band[1]:
freqOk = True
if not freqOk:
raise InvalidValueError("Invalid frequency!")
return chirp_common.format_freq(value)

def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10

val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.a.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _mem.vfo.a)
work.append(rs)

rs = RadioSetting("vfo.a.sftd", "VFO A Offset dir",
RadioSettingValueList(
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
work.append(rs)

def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)

def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10

val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
rs = RadioSetting("vfo.a.offset",
"VFO A Offset", val1a)
rs.set_apply_callback(apply_offset, _mem.vfo.a)
work.append(rs)

def apply_txpower_listvalue(setting, obj):
LOG.debug("Setting value: " + str(
setting.value) + " from list")
val = str(setting.value)
index = TXP_CHOICES.index(val)
val = TXP_VALUES[index]
obj.set_value(val)

rs = RadioSetting("vfo.a.lowpower", "VFO A Power",
RadioSettingValueList(
LIST_TXPOWER,
LIST_TXPOWER[min(_mem.vfo.a.lowpower, 0x02)]
))
work.append(rs)

rs = RadioSetting("vfo.a.wide", "VFO A Bandwidth",
RadioSettingValueList(
LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.a.wide]))
work.append(rs)

rs = RadioSetting("vfo.a.scode", "VFO A S-CODE",
RadioSettingValueList(
LIST_SCODE,
LIST_SCODE[_mem.vfo.a.scode]))
work.append(rs)

rs = RadioSetting("vfo.a.step", "VFO A Tuning Step",
RadioSettingValueList(
LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
work.append(rs)

rs = RadioSetting("vfo.a.fhss", "VFO A FHSS",
RadioSettingValueBoolean(_mem.vfo.a.fhss))
work.append(rs)

def getToneIndex(tone):
if tone in [0, 0xFFFF]:
index = 0
elif tone >= 0x0258:
index = self.RXTX_CODES.index(str(tone / 10.0))
elif tone <= 0x0258:
index = 50 + tone
if tone > 0x69:
index = tone - 0x6A + 156
return self.RXTX_CODES[index]
def apply_rxtone(setting, obj):
index = self.RXTX_CODES.index(str(setting.value))
if index > 156:
obj.rxtone = index - 156 + 0x6A
elif index > 50:
obj.rxtone = index - 50
elif index == 0:
obj.rxtone = 0
else:
obj.rxtone = int(float(setting.value)*10)

def apply_txtone(setting, obj):
index = self.RXTX_CODES.index(str(setting.value))
if index > 156:
obj.txtone = index - 156 + 0x6A
elif index > 50:
obj.txtone = index - 50
elif index == 0:
obj.txtone = 0
else:
obj.txtone = int(float(setting.value)*10)
rs = RadioSetting("vfo.a.rxtone", "VFA A RX QT/DQT",
RadioSettingValueList(self.RXTX_CODES,
getToneIndex(_mem.vfo.a.rxtone)))
rs.set_apply_callback(apply_rxtone, _mem.vfo.a)
work.append(rs)

rs = RadioSetting("vfo.a.txtone", "VFA A TX QT/DQT",
RadioSettingValueList(self.RXTX_CODES,
getToneIndex(_mem.vfo.a.txtone)))
rs.set_apply_callback(apply_txtone, _mem.vfo.a)
work.append(rs)

val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.b.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _mem.vfo.b)
work.append(rs)

rs = RadioSetting("vfo.b.sftd", "VFO B Offset dir",
RadioSettingValueList(
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
work.append(rs)

val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
rs = RadioSetting("vfo.b.offset",
"VFO B Offset", val1b)
rs.set_apply_callback(apply_offset, _mem.vfo.b)
work.append(rs)

rs = RadioSetting("vfo.b.lowpower", "VFO B Power",
RadioSettingValueList(
LIST_TXPOWER,
LIST_TXPOWER[min(_mem.vfo.b.lowpower, 0x02)]
))
work.append(rs)

rs = RadioSetting("vfo.b.wide", "VFO B Bandwidth",
RadioSettingValueList(
LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.b.wide]))
work.append(rs)

rs = RadioSetting("vfo.b.scode", "VFO B S-CODE",
RadioSettingValueList(
LIST_SCODE,
LIST_SCODE[_mem.vfo.b.scode]))
work.append(rs)

rs = RadioSetting("vfo.b.step", "VFO B Tuning Step",
RadioSettingValueList(
LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
work.append(rs)

rs = RadioSetting("vfo.b.fhss", "VFO B FHSS",
RadioSettingValueBoolean(_mem.vfo.b.fhss))
work.append(rs)

rs = RadioSetting("vfo.b.rxtone", "VFA B RX QT/DQT",
RadioSettingValueList(self.RXTX_CODES,
getToneIndex(_mem.vfo.b.rxtone)))
rs.set_apply_callback(apply_rxtone, _mem.vfo.b)
work.append(rs)

rs = RadioSetting("vfo.b.txtone", "VFA B TX QT/DQT",
RadioSettingValueList(self.RXTX_CODES,
getToneIndex(_mem.vfo.b.txtone)))
rs.set_apply_callback(apply_txtone, _mem.vfo.b)
work.append(rs)

if self._vfoscan:
def scan_validate(value):
freqOk = False
for band in self.VALID_BANDS:
if value >= (band[0]/1000000) and value <= (band[1]/1000000):
freqOk = True
if not freqOk:
raise InvalidValueError("Invalid frequency!")
return value

scanMin = RadioSettingValueInteger(0, 800,
_mem.settings.vfoscanmin)
scanMin.set_validate_callback(scan_validate)
rs = RadioSetting("settings.vfoscanmin", "VFO scan range minimum", scanMin)
work.append(rs)

scanMax = RadioSettingValueInteger(0, 800,
_mem.settings.vfoscanmax)
scanMax.set_validate_callback(scan_validate)
rs = RadioSetting("settings.vfoscanmax", "VFO scan range maximum", scanMax)
work.append(rs)

rs = RadioSetting("settings.bcl", "BCL",
RadioSettingValueBoolean(_mem.settings.bcl))
work.append(rs)

rs = RadioSetting("settings.pttid", "PTT ID",
RadioSettingValueList(self.PTTID_LIST,
self.PTTID_LIST[_mem.settings.pttid]))
work.append(rs)
return top

# TODO: implement settings

def sync_in(self):
"""Download from radio"""
try:
data = _download(self)
except errors.RadioError:
# Pass through any real errors we raise
raise
except:
# If anything unexpected happens, make sure we raise
# a RadioError and log the problem
LOG.exception('Unexpected error during download')
raise errors.RadioError('Unexpected error communicating '
'with the radio')
self._mmap = memmap.MemoryMapBytes(data)

self.process_mmap()

def sync_out(self):
"""Upload to radio"""
try:
_upload(self)
except errors.RadioError:
raise
except Exception:
# If anything unexpected happens, make sure we raise
# a RadioError and log the problem
LOG.exception('Unexpected error during upload')
raise errors.RadioError('Unexpected error communicating '
'with the radio')

def get_features(self):
"""Get the radio's features"""

rf = chirp_common.RadioFeatures()
rf.has_settings = True
rf.has_bank = False
rf.has_tuning_step = False
rf.can_odd_split = True
rf.has_name = True
rf.has_offset = True
rf.has_mode = True
rf.has_dtcs = True
rf.has_rx_dtcs = True
rf.has_dtcs_polarity = True
rf.has_ctone = True
rf.has_cross = True
rf.valid_modes = self.MODES
rf.valid_characters = self.VALID_CHARS
rf.valid_name_length = self.LENGTH_NAME
if self._gmrs:
rf.valid_duplexes = ["", "+", "off"]
else:
rf.valid_duplexes = ["", "-", "+", "split", "off"]
rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross']
rf.valid_cross_modes = [
"Tone->Tone",
"DTCS->",
"->DTCS",
"Tone->DTCS",
"DTCS->Tone",
"->Tone",
"DTCS->DTCS"]
rf.valid_skips = self.SKIP_VALUES
rf.valid_dtcs_codes = self.DTCS_CODES
rf.memory_bounds = (0, 999)
rf.valid_power_levels = self.POWER_LEVELS
rf.valid_bands = self.VALID_BANDS
rf.valid_tuning_steps = STEPS

return rf

def _is_txinh(self, _mem):
raw_tx = ""
for i in range(0, 4):
raw_tx += _mem.txfreq[i].get_raw()
return raw_tx == "\xFF\xFF\xFF\xFF"

def get_memory(self, number):
_mem = self._memobj.memory[number]
#_nam = self._memobj.names[number]
#print(number)
#print(_mem)
#print(_nam)

mem = chirp_common.Memory()
mem.number = number

if _mem.get_raw()[0] == "\xff":
mem.empty = True
return mem

mem.freq = int(_mem.rxfreq) * 10

if self._is_txinh(_mem):
# TX freq not set
mem.duplex = "off"
mem.offset = 0
else:
# TX freq set
offset = (int(_mem.txfreq) * 10) - mem.freq
if offset != 0:
if _split(self.get_features(), mem.freq, int(
_mem.txfreq) * 10):
mem.duplex = "split"
mem.offset = int(_mem.txfreq) * 10
elif offset < 0:
mem.offset = abs(offset)
mem.duplex = "-"
elif offset > 0:
mem.offset = offset
mem.duplex = "+"
else:
mem.offset = 0
for char in _mem.name:
if str(char) == "\xFF":
char = " " # The OEM software may have 0xFF mid-name
mem.name += str(char)
mem.name = mem.name.rstrip()

if not _mem.scan:
mem.skip = "S"

levels = self.POWER_LEVELS
try:
mem.power = levels[_mem.lowpower]
except IndexError:
LOG.error("Radio reported invalid power level %s (in %s)" %
(_mem.power, levels))
mem.power = levels[0]

mem.mode = _mem.wide and "NFM" or "FM"

dtcs_pol = ["N", "N"]

if _mem.txtone in [0, 0xFFFF]:
txmode = ""
elif _mem.txtone >= 0x0258:
txmode = "Tone"
mem.rtone = int(_mem.txtone) / 10.0
elif _mem.txtone <= 0x0258:
txmode = "DTCS"
if _mem.txtone > 0x69:
index = _mem.txtone - 0x6A
dtcs_pol[0] = "R"
else:
index = _mem.txtone - 1
mem.dtcs = self.DTCS_CODES[index]
else:
LOG.warn("Bug: txtone is %04x" % _mem.txtone)

if _mem.rxtone in [0, 0xFFFF]:
rxmode = ""
elif _mem.rxtone >= 0x0258:
rxmode = "Tone"
mem.ctone = int(_mem.rxtone) / 10.0
elif _mem.rxtone <= 0x0258:
rxmode = "DTCS"
if _mem.rxtone >= 0x6A:
index = _mem.rxtone - 0x6A
dtcs_pol[1] = "R"
else:
index = _mem.rxtone - 1
mem.rx_dtcs = self.DTCS_CODES[index]
else:
LOG.warn("Bug: rxtone is %04x" % _mem.rxtone)

if txmode == "Tone" and not rxmode:
mem.tmode = "Tone"
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
mem.tmode = "TSQL"
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
mem.tmode = "DTCS"
elif rxmode or txmode:
mem.tmode = "Cross"
mem.cross_mode = "%s->%s" % (txmode, rxmode)

mem.dtcs_polarity = "".join(dtcs_pol)

mem.extra = RadioSettingGroup("Extra", "extra")

rs = RadioSetting("bcl", "BCL",
RadioSettingValueBoolean(_mem.bcl))
mem.extra.append(rs)

rs = RadioSetting("pttid", "PTT ID",
RadioSettingValueList(self.PTTID_LIST,
self.PTTID_LIST[_mem.pttid]))
mem.extra.append(rs)

rs = RadioSetting("scode", "S-CODE",
RadioSettingValueList(self.SCODE_LIST,
self.SCODE_LIST[_mem.scode]))
mem.extra.append(rs)

return mem

def set_memory(self, mem):
_mem = self._memobj.memory[mem.number]

_mem.set_raw("\x00"*16 + "\xff" * 16)

if mem.empty:
_mem.set_raw("\xff" * 32)
return

_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10

_namelength = self.get_features().valid_name_length
for i in range(_namelength):
try:
_mem.name[i] = mem.name[i]
except IndexError:
_mem.name[i] = "\xFF"

rxmode = txmode = ""
if mem.tmode == "Tone":
_mem.txtone = int(mem.rtone * 10)
_mem.rxtone = 0
elif mem.tmode == "TSQL":
_mem.txtone = int(mem.ctone * 10)
_mem.rxtone = int(mem.ctone * 10)
elif mem.tmode == "DTCS":
rxmode = txmode = "DTCS"
_mem.txtone = self.DTCS_CODES.index(mem.dtcs) + 1
_mem.rxtone = self.DTCS_CODES.index(mem.dtcs) + 1
elif mem.tmode == "Cross":
txmode, rxmode = mem.cross_mode.split("->", 1)
if txmode == "Tone":
_mem.txtone = int(mem.rtone * 10)
elif txmode == "DTCS":
_mem.txtone = self.DTCS_CODES.index(mem.dtcs) + 1
else:
_mem.txtone = 0
if rxmode == "Tone":
_mem.rxtone = int(mem.ctone * 10)
elif rxmode == "DTCS":
_mem.rxtone = self.DTCS_CODES.index(mem.rx_dtcs) + 1
else:
_mem.rxtone = 0
else:
_mem.rxtone = 0
_mem.txtone = 0

if txmode == "DTCS" and mem.dtcs_polarity[0] == "R":
_mem.txtone += 0x69
if rxmode == "DTCS" and mem.dtcs_polarity[1] == "R":
_mem.rxtone += 0x69

_mem.scan = mem.skip != "S"
_mem.wide = mem.mode == "NFM"

if mem.power:
_mem.lowpower = self.POWER_LEVELS.index(mem.power)
else:
_mem.lowpower = 0

# extra settings
if len(mem.extra) > 0:
# there are setting, parse
for setting in mem.extra:
if setting.get_name() == "scode":
setattr(_mem, setting.get_name(), str(int(setting.value)))
else:
setattr(_mem, setting.get_name(), setting.value)
else:
# there are no extra settings, load defaults
_mem.bcl = 0
_mem.pttid = 0
_mem.scode = 0

def set_settings(self, settings):
_settings = self._memobj.settings
_mem = self._memobj
for element in settings:
if not isinstance(element, RadioSetting):
if element.get_name() == "fm_preset":
self._set_fm_preset(element)
else:
self.set_settings(element)
continue
else:
try:
name = element.get_name()
if "." in name:
bits = name.split(".")
obj = self._memobj
for bit in bits[:-1]:
if "/" in bit:
bit, index = bit.split("/", 1)
index = int(index)
obj = getattr(obj, bit)[index]
else:
obj = getattr(obj, bit)
setting = bits[-1]
else:
obj = _settings
setting = element.get_name()

if element.has_apply_callback():
LOG.debug("Using apply callback")
element.run_apply_callback()
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception:
LOG.debug(element.get_name())
raise

def _set_fm_preset(self, settings):
for element in settings:
try:
val = element.value
if self._memobj.fm_presets <= 108.0 * 10 - 650:
value = int(val.get_value() * 10 - 650)
else:
value = int(val.get_value() * 10)
LOG.debug("Setting fm_presets = %s" % (value))
if self._bw_shift:
value = ((value & 0x00FF) << 8) | ((value & 0xFF00) >> 8)
self._memobj.fm_presets = value
except Exception:
LOG.debug(element.get_name())
raise

@classmethod
def match_model(cls, filedata, filename):
match_size = False
match_model = False

# testing the file data size
if len(filedata) in [cls.MEM_TOTAL + len(cls.MODEL)]:
match_size = True

# testing the firmware model fingerprint
match_model = model_match(cls, filedata)
if match_size and match_model:
return True
else:
return False


@directory.register
class UV17ProGPS(UV17Pro):
VENDOR = "Baofeng"
MODEL = "UV-17ProGPS"
_support_banknames = True
_magic = MSTRING_UV17PROGPS
_magics = [b"\x46", b"\x4d", b"\x53\x45\x4E\x44\x21\x05\x0D\x01\x01\x01\x04\x11\x08\x05\x0D\x0D\x01\x11\x0F\x09\x12\x09\x10\x04\x00"]
_magicResponseLengths = [16, 7, 1]
_aniid = False
_vfoscan = True
_has_gps = True
_voxsw = True
_pilot_tone = True
_send_id_delay = True
_skey2_short = True
VALID_BANDS = [UV17Pro._airband, UV17Pro._vhf_range, UV17Pro._vhf2_range,
UV17Pro._uhf_range, UV17Pro._uhf2_range]

@directory.register
class UV17L(UV17Pro):
VENDOR = "Baofeng"
MODEL = "UV-17L"


(10-10/17)