Project

General

Profile

Download (52.7 KB)

Bug #10744 » ft4.py

17d5790b - Dan Smith, 07/30/2023 08:23 AM

 
# Copyright 2019 Dan Clemmensen <DanClemmensen@Gmail.com>
# Derives loosely from two sources released under GPLv2:
# ./template.py, Copyright 2012 Dan Smith <dsmith@danplanet.com>
# ./ft60.py, Copyright 2011 Dan Smith <dsmith@danplanet.com>
# Edited 2020, 2023 Bernhard Hailer AE6YN <ham73tux@gmail.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

"""
CHIRP driver for Yaesu radios that use the SCU-35 cable. This includes at
least the FT-4X, FT-4V, FT-65, and FT-25. This driver will not work with older
Yaesu models.
"""
import logging
import struct
import copy
from chirp import chirp_common, directory, memmap, bitwise, errors, util
from chirp.settings import RadioSetting, RadioSettingGroup, \
RadioSettingValueList, RadioSettingValueString, RadioSettings

LOG = logging.getLogger(__name__)


# Layout of Radio memory image.
# This module and the serial protocol treat the FT-4 memory as 16-byte blocks.
# There in nothing magic about 16-byte blocks, but it simplifies the
# description. There are 17 groups of blocks, each with a different purpose
# and format. Five groups consist of channel memories, or "mems" in CHIRP.
# A "mem" describes a radio channel, and all "mems" have the same internal
# format. Three of the groups consist of bitmaps, which all have the same
# internal mapping. also groups for Name, misc, DTMF digits, and prog,
# plus some unused groups. The MEM_FORMAT describes the radio image memory.
# MEM_FORMAT is parsed in module ../bitwise.py. Syntax is similar but not
# identical to C data and structure definitions.

# Define the structures for each type of group here, but do not associate them
# with actual memory addresses yet
MEM_FORMAT = """
struct slot {
u8 tx_pwr; //0, 1, 2 == lo, medium, high
bbcd freq[4]; // Hz/10 but must end in 00
u8 tx_ctcss; //see ctcss table, but radio code = CHIRP code+1. 0==off
u8 rx_ctcss; //see ctcss table, but radio code = CHIRP code+1. 0==off
u8 tx_dcs; //see dcs table, but radio code = CHIRP code+1. 0==off
u8 rx_dcs; //see dcs table, but radio code = CHIRP code+1. 0==off
u8 unknown1:5,
duplex:3; //(auto,offset). (0,2,4,5)= (+,-,0, auto)
ul16 offset; //little-endian binary * scaler, +- per duplex
//scaler is 25 kHz for FT-4, 50 kHz for FT-65.
u8 unknown2:7,
tx_width:1; //0=wide, 1=narrow
u8 step; //STEPS (0-9)=(auto,5,6.25,10,12.5,15,20,25,50,100) kHz
u8 sql_type; //(0-6)==(off,r-tone,t-tone,tsql,rev tn,dcs,pager)
u8 unused;
};
// one bit per channel. 220 bits (200 mem+ 2*10 PMS) padded to fill
//exactly 2 blocks
struct bitmap {
u8 b8[28];
u8 unused[4];
};
//name struct occupies half a block (8 bytes)
//the code restricts the actual len to 6 for an FT-4
struct name {
u8 chrs[8]; //[0-9,A-z,a-z, -] padded with spaces
};
//txfreq struct occupies 4 bytes (1/4 slot)
struct txfreq {
bbcd freq[4];
};

//miscellaneous params. One 4-block group.
//"SMI": "Set Mode Index" of the FT-4 radio keypad function to set parameter.
//"SMI numbers on the FT-65 are different but the names in mem are the same.
struct misc {
u8 apo; //SMI 01. 0==off, (1-24) is the number of half-hours.
u8 arts_beep; //SMI 02. 0==off, 1==inrange, 2==always
u8 arts_intv; //SMI 03. 0==25 seconds, 1==15 seconds
u8 battsave; //SMI 32. 0==off, (1-5)==(200,300,500,1000,2000) ms
u8 bclo; //SMI 04. 0==off, 1==on
u8 beep; //SMI 05. (0-2)==(key+scan,key, off)
u8 bell; //SMI 06. (0-5)==(0,1,3,5,8,continuous) bells
u8 cw_id[6]; //SMI 08. callsign (A_Z,0-9) (pad with space if <6)
u8 unknown1[3];
// addr= 2010
u8 dtmf_mode; //SMI 12. 0==manual, 1==auto
u8 dtmf_delay; //SMI 11. (0-4)==(50,250,450,750,1000) ms
u8 dtmf_speed; //SMI 13. (0,1)=(50,100) ms
u8 edg_beep; //SMI 14. 0==off, 1==on
u8 key_lock; //SMI 18. (0-2)==(key,ptt,key+ptt)
u8 lamp; //SMI 15. (0-4)==(5,10,30,continuous,off) secKEY
u8 tx_led; //SMI 17. 0==off, 1==on
u8 bsy_led; //SMI 16. 0==off, 1==on
u8 moni_tcall; //SMI 19. (0-4)==(mon,1750,2100,1000,1450) tcall Hz.
u8 pri_rvt; //SMI 23. 0==off, 1==on
u8 scan_resume; //SMI 34. (0-2)==(busy,hold,time)
u8 rf_squelch; //SMI 28. 0==off, 8==full, (1-7)==(S1-S7)
u8 scan_lamp; //SMI 33 0==off,1==on
u8 unknown2;
u8 use_cwid; //SMI 7. 0==no, 1==yes
u8 compander; // compander on FT_65
// addr 2020
u8 unknown3;
u8 tx_save; //SMI 41. 0==off, 1==on (addr==2021)
u8 vfo_spl; //SMI 42. 0==off, 1==on
u8 vox; //SMI 43. 0==off, 1==on
u8 wfm_rcv; //SMI 44. 0==off, 1==on
u8 unknown4;
u8 wx_alert; //SMI 46. 0==off, 1==0n
u8 tot; //SMI 39. 0-off, (1-30)== (1-30) minutes
u8 pager_tx1; //SMI 21. (0-49)=(1-50) epcs code (i.e., value is code-1)
u8 pager_tx2; //SMI 21 same
u8 pager_rx1; //SMI 23 same
u8 pager_rx2; //SMI 23 same
u8 pager_ack; //SMI 22 same
u8 unknown5[3]; //possibly sql_setting and pgm_vfo_scan on FT-65?
// addr 2030
u8 use_passwd; //SMI 26 0==no, 1==yes
u8 passwd[4]; //SMI 27 ASCII (0-9)
u8 unused2[11]; // pad out to a block boundary
};

struct dtmfset {
u8 digit[16]; //ASCII (*,#,-,0-9,A-D). (dash-filled)
};

// area to be filled with 0xff, or just ignored
struct notused {
u8 unused[16];
};
// areas we are still analyzing
struct unknown {
u8 notknown[16];
};

struct progc {
u8 usage; //P key is (0-2) == unused, use P channel, use parm
u8 submode:2, //if parm!=0 submode 0-3 of mode
parm:6; //if usage == 2: if 0, use m-channel, else mode
};
"""
# Actual memory layout. 0x215 blocks, in 20 groups.
MEM_FORMAT += """
#seekto 0x0000;
struct unknown radiotype; //0000 probably a radio type ID but not sure
struct slot memory[200]; //0010 channel memory array
struct slot pms[20]; //0c90 10 PMS (L,U) slot pairs
struct slot vfo[5]; //0dd0 VFO (A UHF, A VHF, B FM, B UHF, B VHF)
struct slot home[3]; //0e20 Home (FM, VHF, UHF)
struct bitmap enable; //0e50
struct bitmap scan; //0e70
struct notused notused0; //0e90
struct bitmap bankmask[10]; //0ea0
struct notused notused1[2]; //0fe0
struct name names[220]; //1000 220 names in 110 blocks
struct notused notused2[2]; //16e0
struct txfreq txfreqs[220]; //1700 220 freqs in 55 blocks
struct notused notused3[89]; //1a20
struct misc settings; //2000 4-block collection of misc params
struct notused notused4[2]; //2040
struct dtmfset dtmf[9]; //2060 sets 1-9
struct notused notused5; //20f0
//struct progs progkeys; //2100 not a struct. bitwise.py refuses
struct progc progctl[4]; //2100 8 bytes. 1 2-byte struct per P key
u8 pmemndx[4]; //2108 4 bytes, 1 per P key
u8 notused6[4]; //210c fill out the block
struct slot prog[4]; //2110 P key "channel" array
//---------------- end of FT-4 mem?
"""
# The remaining mem is (apparently) not available on the FT4 but is
# reported to be available on the FT-65. Not implemented here yet.
# Possibly, memory-mapped control registers that allow for "live-mode"
# operation instead of "clone-mode" operation.
# 2150 27ff (unused?)
# 2800 285f 6 MRU operation?
# 2860 2fff (unused?)
# 3000 310f 17 (version info, etc?)
# ----------END of memory map


# Begin Serial transfer utilities for the SCU-35 cable.

# The serial transfer protocol was implemented here after snooping the wire.
# After it was implemented, we noticed that it is identical to the protocol
# implemented in th9000.py. A non-echo version is implemented in anytone_ht.py.
#
# The pipe.read and pipe.write functions use bytes, not strings. The serial
# transfer utilities operate only to move data between the memory object and
# the serial port. The code runs on either Python 2 or Python3, so some
# constructs could be better optimized for one or the other, but not both.


def get_mmap_data(radio):
"""
horrible kludge needed until we convert entirely to Python 3 OR we add a
slightly less horrible kludge to the Py2 or Py3 versions of memmap.py.
The minimal change have Py3 code return a bytestring instead of a string.
This is the only function in this module that must explicitly test for the
data string type. It is used only in the do_upload function.
returns the memobj data as a byte-like object.
"""
data = radio.get_mmap().get_packed()
if isinstance(data, bytes):
return data
return bytearray(radio.get_mmap()._data)


def checkSum8(data):
"""
Calculate the 8 bit checksum of buffer
Input: buffer - bytes
returns: integer
"""
return sum(x for x in bytearray(data)) & 0xFF


def variable_len_resp(pipe):
"""
when length of expected reply is not known, read byte at a time
until the ack character is found.
"""
response = b""
i = 0
toolong = 256 # arbitrary
while True:
b = pipe.read(1)
if b == b'\x06':
break
else:
response += b
i += 1
if i > toolong:
LOG.debug("Response too long. got" + util.hexprint(response))
raise errors.RadioError("Response from radio too long.")
return response


def sendcmd(pipe, cmd, response_len):
"""
send a command bytelist to radio,receive and return the resulting bytelist.
Input: pipe - serial port object to use
cmd - bytes to send
response_len - number of bytes of expected response,
not including the ACK. (if None, read until ack)
This cable is "two-wire": The TxD and RxD are "or'ed" so we receive
whatever we send and then whatever response the radio sends. We check the
echo and strip it, returning only the radio's response.
We also check and strip the ACK character at the end of the response.
"""
pipe.write(cmd)
echo = pipe.read(len(cmd))
if echo != cmd:
msg = "Bad echo. Sent:" + util.hexprint(cmd) + ", "
msg += "Received:" + util.hexprint(echo)
LOG.debug(msg)
raise errors.RadioError(
"Incorrect echo on serial port. Radio off? Bad cable?")
if response_len is None:
return variable_len_resp(pipe)
if response_len > 0:
response = pipe.read(response_len)
else:
response = b""
ack = pipe.read(1)
if ack != b'\x06':
LOG.debug("missing ack: expected 0x06, got" + util.hexprint(ack))
raise errors.RadioError("Incorrect ACK on serial port.")
return response


def enter_clonemode(radio):
"""
Send the PROGRAM command and check the response. Retry if
needed. After 3 tries, send an "END" and try some more if
it is acknowledged.
"""
for use_end in range(0, 3):
for i in range(0, 3):
try:
if b"QX" == sendcmd(radio.pipe, b"PROGRAM", 2):
return
except Exception:
continue
sendcmd(radio.pipe, b"END", 0)
raise errors.RadioError("expected QX from radio.")


def startcomms(radio, way):
"""
For either upload or download, put the radio into PROGRAM mode
and check the radio's ID. In this preliminary version of the driver,
the exact nature of the ID has been inferred from a single test case.
set up the progress bar
send "PROGRAM" to command the radio into clone mode
read the initial string (version?)
"""
progressbar = chirp_common.Status()
progressbar.msg = "Cloning " + way + " radio"
progressbar.max = radio.numblocks
enter_clonemode(radio)
id_response = sendcmd(radio.pipe, b'\x02', None)

# The last byte of the ID contains info about regional differences
radio.subtype = id_response[-1]
# Set last byte of the ID zero so that no ID warning is thrown
# Unfortunately, the returned object is an immutable bytes object,
# so we need to convert into a bytearray, modify, and convert back.
ba_id_response = bytearray(id_response)
ba_id_response[len(ba_id_response) - 1] = 0
id_response_mod = bytes(ba_id_response)

if id_response != radio.id_str:
substr0 = radio.id_str[:radio.id_str.find(b'\x00')]
if id_response[:id_response.find(b'\x00')] != substr0:
msg = "ID mismatch. Expected" + util.hexprint(radio.id_str)
msg += ", Received:" + util.hexprint(id_response_mod)
LOG.warning(msg)
raise errors.RadioError("Incorrect ID read from radio.")
else:
msg = "ID suspect. Expected" + util.hexprint(radio.id_str)
msg += ", Received:" + util.hexprint(id_response_mod)
LOG.warning(msg)
return progressbar


def getblock(pipe, addr, image):
"""
read a single 16-byte block from the radio.
send the command and check the response
places the response into the correct offset in the supplied bytearray
returns True if successful, False if error.
"""
cmd = struct.pack(">cHb", b"R", addr, 16)
response = sendcmd(pipe, cmd, 21)
if (response[0] != b"W"[0]) or (response[1:4] != cmd[1:4]):
msg = "Bad response. Sent:\n%s" % util.hexprint(cmd)
msg += "\nReceived:\n%s" % util.hexprint(response)
LOG.debug(msg)
return False
if checkSum8(response[1:20]) != bytearray(response)[20]:
LOG.debug("Bad checksum:\n%s" % util.hexprint(response))
LOG.debug('%r != %r' % (checkSum8(response[1:20]),
bytearray(response)[20]))
return False
image[addr:addr+16] = response[4:20]
return True


def do_download(radio):
"""
Read memory from the radio.
call startcomms to go into program mode and check version
create an mmap
read the memory blocks and place the data into the mmap
send "END"
"""
image = bytearray(radio.get_memsize())
pipe = radio.pipe # Get the serial port connection
progressbar = startcomms(radio, "from")
for blocknum in range(radio.numblocks):
for i in range(0, 3):
if getblock(pipe, 16 * blocknum, image):
break
if i == 2:
raise errors.RadioError(
"read block from radio failed 3 times")
progressbar.cur = blocknum
radio.status_fn(progressbar)
sendcmd(pipe, b"END", 0)
return memmap.MemoryMapBytes(bytes(image))


def putblock(pipe, addr, data):
"""
write a single 16-byte block to the radio
send the command and check the response
"""
chkstr = struct.pack(">Hb", addr, 16) + data
msg = b'W' + chkstr + struct.pack('B', checkSum8(chkstr)) + b'\x06'
sendcmd(pipe, msg, 0)


def do_upload(radio):
"""
Write memory image to radio
call startcomms to go into program mode and check version
write the memory blocks. Skip the first block
send "END"
"""
pipe = radio.pipe # Get the serial port connection
progressbar = startcomms(radio, "to")
data = get_mmap_data(radio)
for _i in range(1, radio.numblocks):
putblock(pipe, 16*_i, data[16*_i:16*(_i+1)])
progressbar.cur = _i
radio.status_fn(progressbar)
sendcmd(pipe, b"END", 0)
return
# End serial transfer utilities


def bit_loc(bitnum):
"""
return the ndx and mask for a bit location
"""
return (bitnum // 8, 1 << (bitnum & 7))


def store_bit(bankmem, bitnum, val):
"""
store a bit in a bankmem. Store 0 or 1 for False or True
"""
ndx, mask = bit_loc(bitnum)
if val:
bankmem.b8[ndx] |= mask
else:
bankmem.b8[ndx] &= ~mask
return


def retrieve_bit(bankmem, bitnum):
"""
return True or False for a bit in a bankmem
"""
ndx, mask = bit_loc(bitnum)
return (bankmem.b8[ndx] & mask) != 0


# A bank is a bitmap of 220 bits. 200 mem slots and 2*10 PMS slots.
# There are 10 banks.
class YaesuSC35GenericBankModel(chirp_common.BankModel):

def get_num_mappings(self):
return 10

def get_mappings(self):
banks = []
for i in range(1, 1 + self.get_num_mappings()):
bank = chirp_common.Bank(self, "%i" % i, "Bank %i" % i)
bank.index = i - 1
banks.append(bank)
return banks

def add_memory_to_mapping(self, memory, bank):
bankmem = self._radio._memobj.bankmask[bank.index]
store_bit(bankmem, memory.number-1, True)

def remove_memory_from_mapping(self, memory, bank):
bankmem = self._radio._memobj.bankmask[bank.index]
if not retrieve_bit(bankmem, memory.number-1):
raise Exception("Memory %i is not in bank %s." %
(memory.number, bank))
store_bit(bankmem, memory.number-1, False)

# return a list of slots in a bank
def get_mapping_memories(self, bank):
memories = []
for i in range(*self._radio.get_features().memory_bounds):
if retrieve_bit(self._radio._memobj.bankmask[bank.index], i - 1):
memories.append(self._radio.get_memory(i))
return memories

# return a list of banks a slot is a member of
def get_memory_mappings(self, memory):
memndx = memory.number - 1
banks = []
for bank in self.get_mappings():
if retrieve_bit(self._radio._memobj.bankmask[bank.index], memndx):
banks.append(bank)
return banks


# the values in these lists must also be in the canonical UI list
# we can re-arrange the order, and we don't need to have all
# the values, but we cannot add our own values here.

DUPLEX = ["+", "", "-", "", "off", "", "split"] # (0,2,4,5) = (+, -, 0, auto)
# The radio implements duplex "auto" as 5. We map to "". It is a convenience
# function in the radio that affects the offset, which sets the duplex value
# according to the frequency in use. Yaesu doesn't entirely adhere to the band
# plans; but worse, they save the value 'auto' instead of + or -. Why Yaesu
# is doing such a thing is beyond me. [AE6YN]
DUPLEX_AUTO_US = [
[145100000, 145495000, 2],
[146000000, 146395000, 0],
[146600000, 146995000, 2],
[147000000, 147395000, 0],
[147600000, 147995000, 2]]
# (There are no automatic duplex values in IARU-2 70CM.)
DUPLEX_AUTO_EU = [
[145600000, 145800000, 2],
[438200000, 439425000, 2]]

SKIPS = ["S", ""]

POWER_LEVELS = [
chirp_common.PowerLevel("High", watts=5.0), # high must be first (0)
chirp_common.PowerLevel("Mid", watts=2.5),
chirp_common.PowerLevel("Low", watts=0.5)]

# these steps encode to 0-9 on all radios, but encoding #2 is disallowed
# on the US versions (FT-4XR)
STEP_CODE = [0, 5.0, 6.25, 10.0, 12.5, 15.0, 20.0, 25.0, 50.0, 100.0]
US_LEGAL_STEPS = list(STEP_CODE) # copy to pass to UI on US radios
US_LEGAL_STEPS.remove(6.25) # euro radios just use STEP_CODE

# Map the radio image sql_type (0-6) to the CHIRP mem values.
# Yaesu "TSQL" and "DCS" each map to different CHIRP values depending on the
# radio values of the tx and rx tone codes. The table is a list of rows, one
# per Yaesu sql_type (0-5). The code does not use this table when the sql_type
# is 6 (PAGER). Each row is a tuple. Its first member is a list of
# [tmode,cross] or [tmode, cross, suppress]. "Suppress" is used only when
# encoding UI-->radio. When decoding radio-->UI, two of the sql_types each
# result in 5 possible UI decodings depending on the tx and rx codes, and the
# list in each of these rows has five members. These two row tuples each have
# two additional members to specify which of the radio fields to examine.
# The map from CHIRP UI to radio image types is also built from this table.
RADIO_TMODES = [
([["", None], ], ), # sql_type= 0. off
([["Cross", "->Tone"], ], ), # sql_type= 1. R-TONE
([["Tone", None], ], ), # sql_type= 2. T-TONE
([ # sql_type= 3. TSQL:
["", None], # tx==0, rx==0 : invalid
["TSQL", None], # tx==0
["Tone", None], # rx==0
["Cross", "Tone->Tone"], # tx!=rx
["TSQL", None] # tx==rx
], "tx_ctcss", "rx_ctcss"), # tx and rx fields to check
([["TSQL-R", None], ], ), # sql_type= 4. REV TN
([ # sql_type= 5.DCS:
["", None], # tx==0, rx==0 : invalid
["Cross", "->DTCS", "tx_dcs"], # tx==0. suppress tx
["Cross", "DTCS->", "rx_dcs"], # rx==0. suppress rx
["Cross", "DTCS->DTCS"], # tx!=rx
["DTCS", None] # tx==rx
], "tx_dcs", "rx_dcs"), # tx and rx fields to check
# # sql_type= 6. PAGER is a CHIRP "extra"
]

# Find all legal values for the tmode and cross fields for the UI.
# We build two dictionaries to do the lookups when encoding.
# The reversed range is a kludge: by happenstance, earlier duplicates
# in the above table are the preferred mapping, they override the
# later ones when we process the table backwards.
TONE_DICT = {} # encode sql_type.
CROSS_DICT = {} # encode sql_type.

for sql_type in reversed(range(0, len(RADIO_TMODES))):
sql_type_row = RADIO_TMODES[sql_type]
for decode_row in sql_type_row[0]:
suppress = None
if len(decode_row) == 3:
suppress = decode_row[2]
TONE_DICT[decode_row[0]] = (sql_type, suppress)
if decode_row[1]:
CROSS_DICT[decode_row[1]] = (sql_type, suppress)

# The keys are added to the "VALID" lists using code that puts those lists
# in the same order as the UI's default order instead of the random dict
# order or the arbitrary build order.
VALID_TONE_MODES = [] # list for UI.
VALID_CROSS_MODES = [] # list for UI.
for name in chirp_common.TONE_MODES:
if name in TONE_DICT:
VALID_TONE_MODES += [name]
for name in chirp_common.CROSS_MODES:
if name in CROSS_DICT:
VALID_CROSS_MODES += [name]


DTMF_CHARS = "0123456789ABCD*#- "
CW_ID_CHARS = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ "
PASSWD_CHARS = "0123456789"
CHARSET = CW_ID_CHARS + "abcdefghijklmnopqrstuvwxyz*+-/@"
PMSNAMES = ["%s%02d" % (c, i) for i in range(1, 11) for c in ('L', 'U')]

# Four separate arrays of special channel mems.
# Each special has unique constraints: band, name yes/no, and pms L/U
# The FT-65 class replaces the "prog" entry in this list.
# The name field must be the name of a slot array in MEM_FORMAT
SPECIALS_FT4 = [
("pms", PMSNAMES),
("vfo", ["VFO A UHF", "VFO A VHF", "VFO B FM", "VFO B VHF", "VFO B UHF"]),
("home", ["HOME FM", "HOME VHF", "HOME UHF"]),
("prog", ["P1", "P2"])
]
SPECIALS_FT65 = SPECIALS_FT4
FT65_PROGS = ("prog", ["P1", "P2", "P3", "P4"])
SPECIALS_FT65[-1] = FT65_PROGS # replace the last entry (P key names)


VALID_BANDS_DUAL = [
(65000000, 108000000), # broadcast FM, receive only
(136000000, 174000000), # VHF
(400000000, 480000000) # UHF
]

VALID_BANDS_VHF = [
(65000000, 108000000), # broadcast FM, receive only
(136000000, 174000000), # VHF
]

# bands for the five VFO and three home channel memories
BAND_ASSIGNMENTS_DUALBAND = [2, 1, 0, 1, 2, 0, 1, 2] # all locations used
BAND_ASSIGNMENTS_MONO_VHF = [1, 1, 0, 1, 1, 0, 1, 1] # UHF locations unused


# None, and 50 Tones. Use this explicit array because the
# one in chirp_common could change and no longer describe our radio
TONE_MAP = [
None, 67.0, 69.3, 71.9, 74.4, 77.0, 79.7, 82.5,
85.4, 88.5, 91.5, 94.8, 97.4, 100.0, 103.5,
107.2, 110.9, 114.8, 118.8, 123.0, 127.3,
131.8, 136.5, 141.3, 146.2, 151.4, 156.7,
159.8, 162.2, 165.5, 167.9, 171.3, 173.8,
177.3, 179.9, 183.5, 186.2, 189.9, 192.8,
196.6, 199.5, 203.5, 206.5, 210.7, 218.1,
225.7, 229.1, 233.6, 241.8, 250.3, 254.1
]

# None, and 104 DTCS Codes. Use this explicit array because the
# one in chirp_common could change and no longer describe our radio
DTCS_MAP = [
None, 23, 25, 26, 31, 32, 36, 43, 47, 51, 53, 54,
65, 71, 72, 73, 74, 114, 115, 116, 122, 125, 131,
132, 134, 143, 145, 152, 155, 156, 162, 165, 172, 174,
205, 212, 223, 225, 226, 243, 244, 245, 246, 251, 252,
255, 261, 263, 265, 266, 271, 274, 306, 311, 315, 325,
331, 332, 343, 346, 351, 356, 364, 365, 371, 411, 412,
413, 423, 431, 432, 445, 446, 452, 454, 455, 462, 464,
465, 466, 503, 506, 516, 523, 526, 532, 546, 565, 606,
612, 624, 627, 631, 632, 654, 662, 664, 703, 712, 723,
731, 732, 734, 743, 754
]

# The legal PAGER codes are the same as the CTCSS codes, but we
# pass them to the UI as a list of strings
EPCS_CODES = [format(flt) for flt in [0] + TONE_MAP[1:]]


# allow a child class to add a param to its class
# description list. used when a specific radio class has
# a param that is not in the generic list.
def add_paramdesc(desc_list, group, param):
for description in desc_list:
groupname, title, parms = description
if group == groupname:
description[2].append(param)
return


class YaesuSC35GenericRadio(chirp_common.CloneModeRadio,
chirp_common.ExperimentalRadio):
"""
Base class for all Yaesu radios using the SCU-35 programming cable
and its protocol. Classes for sub families extend this class and
are found towards the end of this file.
"""
VENDOR = "Yaesu"
MODEL = "SCU-35Generic" # No radio directly uses the base class
BAUD_RATE = 9600
MAX_MEM_SLOT = 200
NEEDS_COMPAT_SERIAL = False

# These settings are common to all radios in this family.
_valid_chars = chirp_common.CHARSET_ASCII
numblocks = 0x215 # number of 16-byte blocks in the radio
_memsize = 16 * numblocks # used by CHIRP file loader to guess radio type
MAX_MEM_SLOT = 200

# ID string last byte can contain extra info. It is usually 0;
# however, on FT25R/65R sold in Asia we have seen that it can be 3,
# which affects the scaler: instead of the default 50000 it's then 25000.
@property
def subtype(self):
return self.metadata.get('ft4_subtype', 0)

@subtype.setter
def subtype(self, value):
self.metadata = {'ft4_subtype': int(value)}

@classmethod
def get_prompts(cls):
rp = chirp_common.RadioPrompts()
rp.experimental = (
'Tested and mostly works, but may give you issues\n'
'when using lesser common radio variants.\n'
'Proceed at your own risk, and let us know about issues!'
)

rp.pre_download = "".join([
"1. Connect programming cable to MIC jack.\n",
"2. Press OK."
]
)
rp.pre_upload = rp.pre_download
return rp

# identify the features that can be manipulated on this radio.
# mentioned here only when different from defaults in chirp_common.py
def get_features(self):

rf = chirp_common.RadioFeatures()
specials = [name for s in self.class_specials for name in s[1]]
rf.valid_special_chans = specials
rf.memory_bounds = (1, self.MAX_MEM_SLOT)
rf.valid_duplexes = DUPLEX
rf.valid_tmodes = VALID_TONE_MODES
rf.valid_cross_modes = VALID_CROSS_MODES
rf.valid_power_levels = POWER_LEVELS
rf.valid_tuning_steps = self.legal_steps
rf.valid_skips = SKIPS
rf.valid_characters = CHARSET
rf.valid_name_length = self.namelen
rf.valid_modes = ["FM", "NFM"]
rf.valid_bands = self.valid_bands
rf.can_odd_split = True
rf.has_ctone = True
rf.has_rx_dtcs = True
rf.has_dtcs_polarity = False # REV TN reverses the tone, not the dcs
rf.has_cross = True
rf.has_settings = True

return rf

def get_bank_model(self):
return YaesuSC35GenericBankModel(self)

# read and parse the radio memory
def sync_in(self):
try:
self._mmap = do_download(self)
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()

# write the memory image to the radio
def sync_out(self):
try:
do_upload(self)
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)

def process_mmap(self):
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)

# There are about 40 settings and most are handled generically in
# get_settings. get_settings invokes these handlers for the few
# that are more complicated.

# callback for setting byte arrays: DTMF[0-9], passwd, and CW_ID
def apply_str_to_bytearray(self, element, obj):
lng = len(obj)
string = (element.value.get_value() + " ")[:lng]
bytes = bytearray(string, "ascii")
for x in range(0, lng): # memobj cannot iterate, so byte-by-byte
obj[x] = bytes[x]
return

# add a string value to the RadioSettings
def get_string_setting(self, obj, valid_chars, desc1, desc2, group):
content = ''
maxlen = len(obj)
for x in range(0, maxlen):
content += chr(obj[x])
val = RadioSettingValueString(0, maxlen, content, True, valid_chars)
rs = RadioSetting(desc1, desc2, val)
rs.set_apply_callback(self.apply_str_to_bytearray, obj)
group.append(rs)

# called when found in the group_descriptions table to handle string value
def get_strset(self, group, parm):
# parm =(paramname, paramtitle,(handler,[handler params])).
objname, title, fparms = parm
myparms = fparms[1]
obj = getattr(self._memobj.settings, objname)
self.get_string_setting(obj, myparms[0], objname, title, group)

# called when found in the group_descriptions table for DTMF strings
def get_dtmfs(self, group, parm):
objname, title, fparms = parm
for i in range(1, 10):
dtmf_digits = self._memobj.dtmf[i - 1].digit
self.get_string_setting(
dtmf_digits, DTMF_CHARS,
"dtmf_%i" % i, "DTMF Autodialer Memory %i" % i, group)

def apply_P(self, element, pnum, memobj):
memobj.progctl[pnum].usage = element.value

def apply_Pmode(self, element, pnum, memobj):
memobj.progctl[pnum].parm = element.value

def apply_Psubmode(self, element, pnum, memobj):
memobj.progctl[pnum].submode = element.value

def apply_Pmem(self, element, pnum, memobj):
memobj.pmemndx[pnum] = element.value

MEMLIST = ["%d" % i for i in range(1, MAX_MEM_SLOT + 1)] + PMSNAMES
USAGE_LIST = ["unused", "P channel", "mode or M channel"]

# called when found in the group_descriptions table
# returns the settings for the programmable keys (P1-P4)
def get_progs(self, group, parm):
_progctl = self._memobj.progctl
_progndx = self._memobj.pmemndx

def get_prog(i, val_list, valndx, sname, longname, f_apply):
k = str(i + 1)
val = val_list[valndx]
valuelist = RadioSettingValueList(val_list, val)
rs = RadioSetting(sname + k, longname + k, valuelist)
rs.set_apply_callback(f_apply, i, self._memobj)
group.append(rs)
for i in range(0, self.Pkeys):
get_prog(i, self.USAGE_LIST, _progctl[i].usage,
"P", "Programmable key ", self.apply_P)
get_prog(i, self.SETMODES, _progctl[i].parm, "modeP",
"mode for Programmable key ", self.apply_Pmode)
get_prog(i, ["0", "1", "2", "3"], _progctl[i].submode, "submodeP",
"submode for Programmable key ", self.apply_Psubmode)
get_prog(i, self.MEMLIST, _progndx[i], "memP",
"mem for Programmable key ", self.apply_Pmem)
# ------------ End of special settings handlers.

# list of group description tuples: [groupame,group title, [param list]].
# A param is a tuple:
# for a simple param: (paramname, paramtitle,[valuename list])
# for a handler param: (paramname, paramtitle,( handler,[handler params]))
# This is a class variable. subclasses must create a variable named
# class_group_descs. The FT-4 classes simply equate this, but the
# FT-65 classes must copy and modify this.
group_descriptions = [
("misc", "Miscellaneous Settings", [ # misc
("apo", "Automatic Power Off",
["OFF"] + ["%0.1f" % (x * 0.5) for x in range(1, 24 + 1)]),
("bclo", "Busy Channel Lock-Out", ["OFF", "ON"]),
("beep", "Enable the Beeper", ["KEY+SC", "KEY", "OFF"]),
("bsy_led", "Busy LED", ["ON", "OFF"]),
("edg_beep", "Band Edge Beeper", ["OFF", "ON"]),
("vox", "VOX", ["OFF", "ON"]),
("rf_squelch", "RF Squelch Threshold",
["OFF", "S-1", "S-2", "S-3", "S-4", "S-5", "S-6", "S-7", "S-FULL"]),
("tot", "Timeout Timer",
["OFF"] + ["%dMIN" % (x) for x in range(1, 30 + 1)]),
("tx_led", "TX LED", ["OFF", "ON"]),
("use_cwid", "use CW ID", ["NO", "YES"]),
("cw_id", "CW ID Callsign", (get_strset, [CW_ID_CHARS])), # handler
("vfo_spl", "VFO Split", ["OFF", "ON"]),
("wfm_rcv", "Enable Broadband FM", ["OFF", "ON"]),
("passwd", "Password", (get_strset, [PASSWD_CHARS])) # handler
]),
("arts", "ARTS Settings", [ # arts
("arts_beep", "ARTS BEEP", ["OFF", "INRANG", "ALWAYS"]),
("arts_intv", "ARTS Polling Interval", ["25 SEC", "15 SEC"])
]),
("ctcss", "CTCSS/DCS/DTMF Settings", [ # ctcss
("bell", "Bell Repetitions", ["OFF", "1T", "3T", "5T", "8T", "CONT"]),
("dtmf_mode", "DTMF Mode", ["Manual", "Auto"]),
("dtmf_delay", "DTMF Autodialer Delay Time",
["50 MS", "100 MS", "250 MS", "450 MS", "750 MS", "1000 MS"]),
("dtmf_speed", "DTMF Autodialer Sending Speed", ["50 MS", "100 MS"]),
("dtmf", "DTMF Autodialer Memory ", (get_dtmfs, [])) # handler
]),
("switch", "Switch/Knob Settings", [ # switch
("lamp", "Lamp Mode", ["5SEC", "10SEC", "30SEC", "KEY", "OFF"]),
("moni_tcall", "MONI Switch Function",
["MONI", "1750", "2100", "1000", "1450"]),
("key_lock", "Lock Function", ["KEY", "PTT", "KEY+PTT"]),
("Pkeys", "Pkey fields", (get_progs, []))
]),
("scan", "Scan Settings", [ # scan
("scan_resume", "Scan Resume Mode", ["BUSY", "HOLD", "TIME"]),
("pri_rvt", "Priority Revert", ["OFF", "ON"]),
("scan_lamp", "Scan Lamp", ["OFF", "ON"]),
("wx_alert", "Weather Alert Scan", ["OFF", "ON"])
]),
("power", "Power Saver Settings", [ # power
("battsave", "Receive Mode Battery Save Interval",
["OFF", "200 MS", "300 MS", "500 MS", "1 S", "2 S"]),
("tx_save", "Transmitter Battery Saver", ["OFF", "ON"])
]),
("eai", "EAI/EPCS Settings", [ # eai
("pager_tx1", "TX pager frequency 1", EPCS_CODES),
("pager_tx2", "TX pager frequency 2", EPCS_CODES),
("pager_rx1", "RX pager frequency 1", EPCS_CODES),
("pager_rx2", "RX pager frequency 2", EPCS_CODES),
("pager_ack", "Pager answerback", ["NO", "YES"])
])
]
# ----------------end of group_descriptions

# returns the current values of all the settings in the radio memory image,
# in the form of a RadioSettings list. Uses the class_group_descs
# list to create the groups and params. Valuelist scalars are handled
# inline. More complex params are built by calling the special handlers.
def get_settings(self):
_settings = self._memobj.settings
groups = RadioSettings()
for description in self.class_group_descs:
groupname, title, parms = description
group = RadioSettingGroup(groupname, title)
groups.append(group)
for parm in parms:
param, title, opts = parm
try:
if isinstance(opts, list):
# setting is a single value from the list
objval = getattr(_settings, param)
value = opts[objval]
valuelist = RadioSettingValueList(opts, value)
group.append(RadioSetting(param, title, valuelist))
else:
# setting needs special handling. opts[0] is a
# function name
opts[0](self, group, parm)
except Exception as e:
LOG.debug(
"%s: cannot set %s to %s" % (e, param, repr(objval))
)
return groups
# end of get_settings

# modify settings values in the radio memory image
def set_settings(self, uisettings):
_settings = self._memobj.settings
for element in uisettings:
if not isinstance(element, RadioSetting):
self.set_settings(element)
continue
if not element.changed():
continue

try:
name = element.get_name()
value = element.value

if element.has_apply_callback():
LOG.debug("Using apply callback")
element.run_apply_callback()
else:
setattr(_settings, name, value)

LOG.debug("Setting %s: %s" % (name, value))
except Exception:
LOG.debug(element.get_name())
raise

# maps a boolean pair (tx==0,rx==0) to the numbers 0-3
LOOKUP = [[True, True], [True, False], [False, True], [False, False]]

def decode_sql(self, mem, chan):
"""
examine the radio channel fields and determine the correct
CHIRP CSV values for tmode, cross_mode, and sql_override
"""
mem.extra = RadioSettingGroup("Extra", "extra")
extra_modes = ["(None)", "PAGER"]
value = extra_modes[chan.sql_type == 6]
valuelist = RadioSettingValueList(extra_modes, value)
rs = RadioSetting("sql_override", "Squelch override", valuelist)
mem.extra.append(rs)
if chan.sql_type == 6:
return
sql_map = RADIO_TMODES[chan.sql_type]
ndx = 0
if len(sql_map[0]) > 1:
# the sql_type is TSQL or DCS, so there are multiple UI mappings
x = getattr(chan, sql_map[1])
r = getattr(chan, sql_map[2])
ndx = self.LOOKUP.index([x == 0, r == 0])
if ndx == 3 and x == r:
ndx = 4
mem.tmode = sql_map[0][ndx][0]
cross = sql_map[0][ndx][1]
if cross:
mem.cross_mode = cross
if chan.rx_ctcss:
mem.ctone = TONE_MAP[chan.rx_ctcss]
if chan.tx_ctcss:
mem.rtone = TONE_MAP[chan.tx_ctcss]
if chan.tx_dcs:
mem.dtcs = DTCS_MAP[chan.tx_dcs]
if chan.rx_dcs:
mem.rx_dtcs = DTCS_MAP[chan.rx_dcs]

def encode_sql(self, mem, chan):
"""
examine CHIRP's mem.tmode and mem.cross_mode and set the values
for the radio sql_type, dcs codes, and ctcss codes. We set all four
codes, and then zero out a code if needed when Tone or DCS is one-way
"""
chan.tx_ctcss = TONE_MAP.index(mem.rtone)
chan.tx_dcs = DTCS_MAP.index(mem.dtcs)
chan.rx_ctcss = TONE_MAP.index(mem.ctone)
chan.rx_dcs = DTCS_MAP.index(mem.rx_dtcs)
if mem.tmode == "TSQL":
chan.tx_ctcss = chan.rx_ctcss # CHIRP uses ctone for TSQL
if mem.tmode == "DTCS":
chan.tx_dcs = chan.rx_dcs # CHIRP uses rx_dtcs for DTCS
# select the correct internal dictionary and key
mode_dict, key = [
(TONE_DICT, mem.tmode),
(CROSS_DICT, mem.cross_mode)
][mem.tmode == "Cross"]
# now look up that key in that dictionary.
chan.sql_type, suppress = mode_dict[key]
if suppress:
setattr(chan, suppress, 0)
for setting in mem.extra:
if (setting.get_name() == 'sql_override'):
value = str(setting.value)
if value == "PAGER":
chan.sql_type = 6
return

# given a CHIRP memory ref, get the radio memobj for it.
# A memref is either a number or the name of a special
# CHIRP will sometimes use numbers (>MAX_SLOTS) for specials
# returns the obj and several attributes
def slotloc(self, memref):
array = None
num = memref
sname = memref
if isinstance(memref, str): # named special?
num = self.MAX_MEM_SLOT + 1
for x in self.class_specials:
try:
ndx = x[1].index(memref)
array = x[0]
break
except Exception:
num += len(x[1])
if array is None:
LOG.debug("unknown Special %s", memref)
raise
num += ndx
elif memref > self.MAX_MEM_SLOT: # numbered special?
ndx = memref - (self.MAX_MEM_SLOT + 1)
for x in self.class_specials:
if ndx < len(x[1]):
array = x[0]
sname = x[1][ndx]
break
ndx -= len(x[1])
if array is None:
LOG.debug("memref number %d out of range", memref)
raise
else: # regular memory slot
array = "memory"
ndx = memref - 1
memloc = getattr(self._memobj, array)[ndx]
return (memloc, ndx, num, array, sname)
# end of slotloc

# return the raw info for a memory channel
def get_raw_memory(self, memref):
memloc, ndx, num, regtype, sname = self.slotloc(memref)
if regtype == "memory":
return repr(memloc)
else:
return repr(memloc) + repr(self._memobj.names[ndx])

# return the info for a memory channel In CHIRP canonical form
def get_memory(self, memref):

def clean_name(obj): # helper func to tidy up the name
name = ''
for x in range(0, self.namelen):
y = obj[x]
if y == 0:
break
if y == 0x7F: # when programmed from VFO
y = 0x20
name += chr(y)
return name.rstrip()

def get_duplex(freq): # auto duplex to real duplex
"""
Select the duplex direction if duplex == 'auto'.
0 is +, 2 is -, and 4 is none.
"""
return_value = 4 # off, if not in auto range
for x in self.DUPLEX_AUTO:
if freq in range(x[0], x[1]):
return_value = x[2]
return return_value

mem = chirp_common.Memory()
_mem, ndx, num, regtype, sname = self.slotloc(memref)
mem.number = num
freq_offset_factor = self.freq_offset_factor
# FT-25R/65R Asia version (US is 0)?
if self.subtype == 3 and freq_offset_factor == 2:
freq_offset_factor = 1 # 25000 scaler

# First, we need to know whether a channel is enabled,
# then we can process any channel parameters.
# It was found (at least on an FT-25) that channels might be
# uninitialized and memory is just completely filled with 0xFF.

if regtype == "pms":
mem.extd_number = sname
if regtype in ["memory", "pms"]:
ndx = num - 1
mem.name = clean_name(self._memobj.names[ndx].chrs)
mem.empty = not retrieve_bit(self._memobj.enable, ndx)
mem.skip = SKIPS[retrieve_bit(self._memobj.scan, ndx)]
else:
mem.empty = False
mem.extd_number = sname
mem.immutable = ["number", "extd_number", "name", "skip"]

# So, now if channel is not empty, we can do the evaluation of
# all parameters. Otherwise we set them to defaults.

if mem.empty:
mem.freq = 0
mem.offset = 0
mem.duplex = "off"
mem.power = POWER_LEVELS[0] # "High"
mem.mode = "FM"
mem.tuning_step = 0
else:
mem.freq = int(_mem.freq) * 10
txfreq = int(self._memobj.txfreqs[ndx].freq) * 10
if _mem.duplex == 5: # auto offset
mem.duplex = DUPLEX[get_duplex(mem.freq)]
else:
mem.duplex = DUPLEX[_mem.duplex]
if _mem.duplex == 6: # split: offset is tx frequency
mem.offset = txfreq
else:
mem.offset = int(_mem.offset) * 25000 * freq_offset_factor
self.decode_sql(mem, _mem)
mem.power = POWER_LEVELS[2 - _mem.tx_pwr]
mem.mode = ["FM", "NFM"][_mem.tx_width]
mem.tuning_step = STEP_CODE[_mem.step]
return mem

def enforce_band(self, memloc, freq, mem_num, sname):
"""
vfo and home channels are each restricted to a particular band.
If the frequency is not in the band, use the lower bound
Raise an exception to cause UI to pop up an error message
"""
first_vfo_num = self.MAX_MEM_SLOT + len(PMSNAMES) + 1
band = self.BAND_ASSIGNMENTS[mem_num - first_vfo_num]
frange = self.valid_bands[band]
if freq >= frange[0] and freq <= frange[1]:
memloc.freq = freq / 10
return freq
memloc.freq = frange[0] / 10
raise Exception("freq out of range for %s" % sname)

# modify a radio channel in memobj based on info in CHIRP canonical form
def set_memory(self, mem):
_mem, ndx, num, regtype, sname = self.slotloc(mem.number)
assert _mem
if mem.empty:
if regtype in ["memory", "pms"]:
store_bit(self._memobj.enable, ndx, False)
return

txfreq = mem.freq / 10 # really. RX freq is used for TX base
_mem.freq = txfreq
self.encode_sql(mem, _mem)
if mem.power:
_mem.tx_pwr = 2 - POWER_LEVELS.index(mem.power)
else:
_mem.tx_pwr = 0 # set to "High" if CHIRP canonical value is None
_mem.tx_width = mem.mode == "NFM"
_mem.step = STEP_CODE.index(mem.tuning_step)

freq_offset_factor = self.freq_offset_factor
# FT-25R/65R Asia version (US version is 0)?
if self.subtype == 3 and freq_offset_factor == 2:
freq_offset_factor = 1 # 25000 scaler
_mem.offset = mem.offset / (25000 * freq_offset_factor)
duplex = mem.duplex
if regtype in ["memory", "pms"]:
ndx = num - 1
store_bit(self._memobj.enable, ndx, True)
store_bit(self._memobj.scan, ndx, SKIPS.index(mem.skip))
nametrim = (mem.name + " ")[:8]
self._memobj.names[ndx].chrs = bytearray(nametrim, "ascii")
if mem.duplex == "split":
txfreq = mem.offset / 10
self._memobj.txfreqs[num-1].freq = txfreq
_mem.duplex = DUPLEX.index(duplex)
if regtype in ["vfo", "home"]:
self.enforce_band(_mem, mem.freq, num, sname)

return


class YaesuFT4GenericRadio(YaesuSC35GenericRadio):
"""
FT-4 sub family class. Classes for individual radios extend
these classes and are found at the end of this file.
"""
class_specials = SPECIALS_FT4
Pkeys = 2 # number of programmable keys
namelen = 6 # length of the mem name display on the front-panel
freq_offset_factor = 1 # 25000 * 1
class_group_descs = YaesuSC35GenericRadio.group_descriptions
# names for the setmode function for the programmable keys. Mode zero means
# that the key is programmed for a memory not a setmode.
SETMODES = [
"mem", "apo", "ar bep", "ar int", "beclo", # 00-04
"beep", "bell", "cw id", "cw wrt", "dc vlt", # 05-09
"dcs cod", "dt dly", "dt set", "dtc spd", "edg.bep", # 10-14
"lamp", "led.bsy", "led.tx", "lock", "m/t-cl", # 15-19
"mem.del", "mem.tag", "pag.abk", "pag.cdr", "pag.cdt", # 20-24
"pri.rvt", "pswd", "pswdwt", "rf sql", "rpt.ars", # 25-29
"rpt.frq", "rpt.sft", "rxsave", "scn.lmp", "scn.rsm", # 30-34
"skip", "sql.typ", "step", "tn frq", "tot", # 35-39
"tx pwr", "tx save", "vfo.spl", "vox", "wfm.rcv", # 40-44
"w/n.dev", "wx.alert" # 45-46
]


class YaesuFT65GenericRadio(YaesuSC35GenericRadio):
"""
FT-65 sub family class. Classes for individual radios extend
these classes and are found at the end of this file.
"""
class_specials = SPECIALS_FT65
Pkeys = 4 # number of programmable keys
namelen = 8 # length of the mem name display on the front-panel
freq_offset_factor = 2 # 25000 * 2
# we need a deep copy here because we are adding deeper than the top level.
class_group_descs = copy.deepcopy(YaesuSC35GenericRadio.group_descriptions)
add_paramdesc(
class_group_descs, "misc", ("compander", "Compander", ["OFF", "ON"]))
# names for the setmode function for the programmable keys. Mode zero means
# that the key is programmed for a memory not a setmode.
SETMODES = [
"mem", "apo", "arts", "battsave", "b-ch.l/o", # 00-04
"beep", "bell", "compander", "ctcss", "cw id", # 05-09
"dc volt", "dcs code", "dtmf set", "dtmf wrt", "edg bep", # 10-14
"key lock", "lamp", "ledbsy", "mem del", "mon/t-cl", # 15-19
"name tag", "pager", "password", "pri.rvt", "repeater", # 20-24
"resume", "rf.sql", "scn.lamp", "skip", "sql type", # 25-29
"step", "tot", "tx pwr", "tx save", "vfo.spl", # 30-34
"vox", "wfm.rcv", "wide/nar", "wx alert", "scramble" # 35-39
]


# Classes for each individual radio.


@directory.register
class YaesuFT4XRRadio(YaesuFT4GenericRadio):
"""
FT-4X dual band, US version
"""
MODEL = "FT-4XR"
id_str = b'IFT-35R\x00\x00V100\x00\x00'
valid_bands = VALID_BANDS_DUAL
DUPLEX_AUTO = DUPLEX_AUTO_US
legal_steps = US_LEGAL_STEPS
BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_DUALBAND


@directory.register
class YaesuFT4XERadio(YaesuFT4GenericRadio):
"""
FT-4X dual band, EU version
"""
MODEL = "FT-4XE"
id_str = b'IFT-35R\x00\x00V100\x00\x00'
valid_bands = VALID_BANDS_DUAL
DUPLEX_AUTO = DUPLEX_AUTO_EU
legal_steps = STEP_CODE
BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_DUALBAND


@directory.register
class YaesuFT4VRRadio(YaesuFT4GenericRadio):
"""
FT-4V VHF, US version
"""
MODEL = "FT-4VR"
id_str = b'IFT-15R\x00\x00V100\x00\x00'
valid_bands = VALID_BANDS_VHF
DUPLEX_AUTO = DUPLEX_AUTO_US
legal_steps = US_LEGAL_STEPS
BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_MONO_VHF


# No image available yet
# @directory.register
# class YaesuFT4VERadio(YaesuFT4GenericRadio):
# """
# FT-4V VHF, EU version
# """
# MODEL = "FT-4VE"
# id_str = b'IFT-15R\x00\x00V100\x00\x00'
# valid_bands = VALID_BANDS_VHF
# DUPLEX_AUTO = DUPLEX_AUTO_EU
# legal_steps = STEP_CODE
# BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_MONO_VHF


@directory.register
class YaesuFT65RRadio(YaesuFT65GenericRadio):
"""
FT-65 dual band, US/Asia version
"""
MODEL = "FT-65R"
id_str = b'IH-420\x00\x00\x00V100\x00\x00'
valid_bands = VALID_BANDS_DUAL
DUPLEX_AUTO = DUPLEX_AUTO_US
legal_steps = STEP_CODE
BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_DUALBAND


@directory.register
class YaesuFT65ERadio(YaesuFT65GenericRadio):
"""
FT-65 dual band, EU version
"""
MODEL = "FT-65E"
id_str = b'IH-420\x00\x00\x00V100\x00\x00'
valid_bands = VALID_BANDS_DUAL
DUPLEX_AUTO = DUPLEX_AUTO_EU
legal_steps = STEP_CODE
BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_DUALBAND


@directory.register
class YaesuFT25RRadio(YaesuFT65GenericRadio):
"""
FT-25 VHF, US/Asia version
"""
MODEL = "FT-25R"
id_str = b'IFT-25R\x00\x00V100\x00\x00'
valid_bands = VALID_BANDS_VHF
DUPLEX_AUTO = DUPLEX_AUTO_US
legal_steps = US_LEGAL_STEPS
BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_MONO_VHF


# No image available yet
# @directory.register
# class YaesuFT25ERadio(YaesuFT65GenericRadio):
# """
# FT-25 VHF, EU version
# """
# MODEL = "FT-25E"
# id_str = b'IFT-25R\x00\x00V100\x00\x00'
# valid_bands = VALID_BANDS_VHF
# DUPLEX_AUTO = DUPLEX_AUTO_EU
# legal_steps = STEP_CODE
# BAND_ASSIGNMENTS = BAND_ASSIGNMENTS_MONO_VHF
(7-7/9)
Copyright 2023 CHIRP Software LLC