|
# Copyright 2012 Dan Smith <dsmith@danplanet.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import struct
|
|
import time
|
|
import os
|
|
import logging
|
|
|
|
from chirp import chirp_common, errors, util, directory, memmap
|
|
from chirp import bitwise
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueInteger, RadioSettingValueList, \
|
|
RadioSettingValueBoolean, RadioSettingValueString, \
|
|
RadioSettingValueFloat, InvalidValueError, RadioSettings
|
|
from textwrap import dedent
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0008;
|
|
struct {
|
|
lbcd rxfreq[4];
|
|
lbcd txfreq[4];
|
|
ul16 rxtone;
|
|
ul16 txtone;
|
|
u8 unused1:3,
|
|
isuhf:1,
|
|
scode:4;
|
|
u8 unknown1:7,
|
|
txtoneicon:1;
|
|
u8 mailicon:3,
|
|
unknown2:3,
|
|
lowpower:2;
|
|
u8 unknown3:1,
|
|
wide:1,
|
|
unknown4:2,
|
|
bcl:1,
|
|
scan:1,
|
|
pttid:2;
|
|
} memory[128];
|
|
|
|
#seekto 0x0B08;
|
|
struct {
|
|
u8 code[5];
|
|
u8 unused[11];
|
|
} pttid[15];
|
|
|
|
#seekto 0x0C88;
|
|
struct {
|
|
u8 code222[3];
|
|
u8 unused222[2];
|
|
u8 code333[3];
|
|
u8 unused333[2];
|
|
u8 alarmcode[3];
|
|
u8 unused119[2];
|
|
u8 unknown1;
|
|
u8 code555[3];
|
|
u8 unused555[2];
|
|
u8 code666[3];
|
|
u8 unused666[2];
|
|
u8 code777[3];
|
|
u8 unused777[2];
|
|
u8 unknown2;
|
|
u8 code60606[5];
|
|
u8 code70707[5];
|
|
u8 code[5];
|
|
u8 unused1:6,
|
|
aniid:2;
|
|
u8 unknown[2];
|
|
u8 dtmfon;
|
|
u8 dtmfoff;
|
|
} ani;
|
|
|
|
#seekto 0x0E28;
|
|
struct {
|
|
u8 squelch;
|
|
u8 step;
|
|
u8 unknown1;
|
|
u8 save;
|
|
u8 vox;
|
|
u8 unknown2;
|
|
u8 abr;
|
|
u8 tdr;
|
|
u8 beep;
|
|
u8 timeout;
|
|
u8 unknown3[4];
|
|
u8 voice;
|
|
u8 unknown4;
|
|
u8 dtmfst;
|
|
u8 unknown5;
|
|
u8 unknown12:6,
|
|
screv:2;
|
|
u8 pttid;
|
|
u8 pttlt;
|
|
u8 mdfa;
|
|
u8 mdfb;
|
|
u8 bcl;
|
|
u8 autolk; // NOTE: The UV-6 calls this byte voxenable, but the UV-5R
|
|
// calls it autolk. Since this is a minor difference, it will
|
|
// be referred to by the wrong name for the UV-6.
|
|
u8 sftd;
|
|
u8 unknown6[3];
|
|
u8 wtled;
|
|
u8 rxled;
|
|
u8 txled;
|
|
u8 almod;
|
|
u8 band;
|
|
u8 tdrab;
|
|
u8 ste;
|
|
u8 rpste;
|
|
u8 rptrl;
|
|
u8 ponmsg;
|
|
u8 roger;
|
|
u8 rogerrx;
|
|
u8 tdrch; // NOTE: The UV-82HP calls this byte rtone, but the UV-6
|
|
// calls it tdrch. Since this is a minor difference, it will
|
|
// be referred to by the wrong name for the UV-82HP.
|
|
u8 displayab:1,
|
|
unknown1:2,
|
|
fmradio:1,
|
|
alarm:1,
|
|
unknown2:1,
|
|
reset:1,
|
|
menu:1;
|
|
u8 unknown1:6,
|
|
singleptt:1,
|
|
vfomrlock:1;
|
|
u8 workmode;
|
|
u8 keylock;
|
|
} settings;
|
|
|
|
#seekto 0x0E7E;
|
|
struct {
|
|
u8 unused1:1,
|
|
mrcha:7;
|
|
u8 unused2:1,
|
|
mrchb:7;
|
|
} wmchannel;
|
|
|
|
#seekto 0x0F10;
|
|
struct {
|
|
u8 freq[8];
|
|
u8 offset[6];
|
|
ul16 rxtone;
|
|
ul16 txtone;
|
|
u8 unused1:7,
|
|
band:1;
|
|
u8 unknown3;
|
|
u8 unused2:2,
|
|
sftd:2,
|
|
scode:4;
|
|
u8 unknown4;
|
|
u8 unused3:1
|
|
step:3,
|
|
unused4:4;
|
|
u8 txpower:1,
|
|
widenarr:1,
|
|
unknown5:4,
|
|
txpower3:2;
|
|
} vfoa;
|
|
|
|
#seekto 0x0F30;
|
|
struct {
|
|
u8 freq[8];
|
|
u8 offset[6];
|
|
ul16 rxtone;
|
|
ul16 txtone;
|
|
u8 unused1:7,
|
|
band:1;
|
|
u8 unknown3;
|
|
u8 unused2:2,
|
|
sftd:2,
|
|
scode:4;
|
|
u8 unknown4;
|
|
u8 unused3:1
|
|
step:3,
|
|
unused4:4;
|
|
u8 txpower:1,
|
|
widenarr:1,
|
|
unknown5:4,
|
|
txpower3:2;
|
|
} vfob;
|
|
|
|
#seekto 0x0F56;
|
|
u16 fm_presets;
|
|
|
|
#seekto 0x1008;
|
|
struct {
|
|
char name[7];
|
|
u8 unknown2[9];
|
|
} names[128];
|
|
|
|
#seekto 0x1818;
|
|
struct {
|
|
char line1[7];
|
|
char line2[7];
|
|
} sixpoweron_msg;
|
|
|
|
#seekto 0x%04X;
|
|
struct {
|
|
char line1[7];
|
|
char line2[7];
|
|
} poweron_msg;
|
|
|
|
#seekto 0x1838;
|
|
struct {
|
|
char line1[7];
|
|
char line2[7];
|
|
} firmware_msg;
|
|
|
|
struct limit {
|
|
u8 enable;
|
|
bbcd lower[2];
|
|
bbcd upper[2];
|
|
};
|
|
|
|
#seekto 0x1908;
|
|
struct {
|
|
struct limit vhf;
|
|
struct limit uhf;
|
|
} limits_new;
|
|
|
|
#seekto 0x1910;
|
|
struct {
|
|
u8 unknown1[2];
|
|
struct limit vhf;
|
|
u8 unknown2;
|
|
u8 unknown3[8];
|
|
u8 unknown4[2];
|
|
struct limit uhf;
|
|
} limits_old;
|
|
|
|
struct squelch {
|
|
u8 sql0;
|
|
u8 sql1;
|
|
u8 sql2;
|
|
u8 sql3;
|
|
u8 sql4;
|
|
u8 sql5;
|
|
u8 sql6;
|
|
u8 sql7;
|
|
u8 sql8;
|
|
u8 sql9;
|
|
};
|
|
|
|
#seekto 0x18A8;
|
|
struct {
|
|
struct squelch vhf;
|
|
u8 unknown1[6];
|
|
u8 unknown2[16];
|
|
struct squelch uhf;
|
|
} squelch_new;
|
|
|
|
#seekto 0x18E8;
|
|
struct {
|
|
struct squelch vhf;
|
|
u8 unknown[6];
|
|
struct squelch uhf;
|
|
} squelch_old;
|
|
|
|
"""
|
|
|
|
# 0x1EC0 - 0x2000
|
|
|
|
vhf_220_radio = "\x02"
|
|
|
|
BASETYPE_UV5R = ["BFS", "BFB", "N5R-2", "N5R2", "N5RV", "BTS", "D5R2", "B5R2"]
|
|
BASETYPE_F11 = ["USA"]
|
|
BASETYPE_UV82 = ["US2S2", "B82S", "BF82", "N82-2", "N822"]
|
|
BASETYPE_BJ55 = ["BJ55"] # needed for for the Baojie UV-55 in bjuv55.py
|
|
BASETYPE_UV6 = ["BF1", "UV6"]
|
|
BASETYPE_KT980HP = ["BFP3V3 B"]
|
|
BASETYPE_F8HP = ["BFP3V3 F", "N5R-3", "N5R3", "F5R3", "BFT", "N5RV"]
|
|
BASETYPE_UV82HP = ["N82-3", "N823", "N5R2"]
|
|
BASETYPE_UV82X3 = ["HN5RV01"]
|
|
BASETYPE_LIST = BASETYPE_UV5R + BASETYPE_F11 + BASETYPE_UV82 + \
|
|
BASETYPE_BJ55 + BASETYPE_UV6 + BASETYPE_KT980HP + \
|
|
BASETYPE_F8HP + BASETYPE_UV82HP + BASETYPE_UV82X3
|
|
|
|
AB_LIST = ["A", "B"]
|
|
ALMOD_LIST = ["Site", "Tone", "Code"]
|
|
BANDWIDTH_LIST = ["Wide", "Narrow"]
|
|
COLOR_LIST = ["Off", "Blue", "Orange", "Purple"]
|
|
DTMFSPEED_LIST = ["%s ms" % x for x in range(50, 2010, 10)]
|
|
DTMFST_LIST = ["OFF", "DT-ST", "ANI-ST", "DT+ANI"]
|
|
MODE_LIST = ["Channel", "Name", "Frequency"]
|
|
PONMSG_LIST = ["Full", "Message"]
|
|
PTTID_LIST = ["Off", "BOT", "EOT", "Both"]
|
|
PTTIDCODE_LIST = ["%s" % x for x in range(1, 16)]
|
|
RTONE_LIST = ["1000 Hz", "1450 Hz", "1750 Hz", "2100Hz"]
|
|
RESUME_LIST = ["TO", "CO", "SE"]
|
|
ROGERRX_LIST = ["Off"] + AB_LIST
|
|
RPSTE_LIST = ["OFF"] + ["%s" % x for x in range(1, 11)]
|
|
SAVE_LIST = ["Off", "1:1", "1:2", "1:3", "1:4"]
|
|
SCODE_LIST = ["%s" % x for x in range(1, 16)]
|
|
SHIFTD_LIST = ["Off", "+", "-"]
|
|
STEDELAY_LIST = ["OFF"] + ["%s ms" % x for x in range(100, 1100, 100)]
|
|
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0]
|
|
STEP_LIST = [str(x) for x in STEPS]
|
|
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 20.0, 25.0, 50.0]
|
|
STEP291_LIST = [str(x) for x in STEPS]
|
|
TDRAB_LIST = ["Off"] + AB_LIST
|
|
TDRCH_LIST = ["CH%s" % x for x in range(1, 129)]
|
|
TIMEOUT_LIST = ["%s sec" % x for x in range(15, 615, 15)] + ["Off (if supported by radio)"]
|
|
TXPOWER_LIST = ["High", "Low"]
|
|
TXPOWER3_LIST = ["High", "Mid", "Low"]
|
|
VOICE_LIST = ["Off", "English", "Chinese"]
|
|
VOX_LIST = ["OFF"] + ["%s" % x for x in range(1, 11)]
|
|
WORKMODE_LIST = ["Frequency", "Channel"]
|
|
|
|
SETTING_LISTS = {
|
|
"almod": ALMOD_LIST,
|
|
"aniid": PTTID_LIST,
|
|
"displayab": AB_LIST,
|
|
"dtmfst": DTMFST_LIST,
|
|
"dtmfspeed": DTMFSPEED_LIST,
|
|
"mdfa": MODE_LIST,
|
|
"mdfb": MODE_LIST,
|
|
"ponmsg": PONMSG_LIST,
|
|
"pttid": PTTID_LIST,
|
|
"rtone": RTONE_LIST,
|
|
"rogerrx": ROGERRX_LIST,
|
|
"rpste": RPSTE_LIST,
|
|
"rxled": COLOR_LIST,
|
|
"save": SAVE_LIST,
|
|
"scode": PTTIDCODE_LIST,
|
|
"screv": RESUME_LIST,
|
|
"sftd": SHIFTD_LIST,
|
|
"stedelay": STEDELAY_LIST,
|
|
"step": STEP_LIST,
|
|
"step291": STEP291_LIST,
|
|
"tdrab": TDRAB_LIST,
|
|
"tdrch": TDRCH_LIST,
|
|
"timeout": TIMEOUT_LIST,
|
|
"txled": COLOR_LIST,
|
|
"txpower": TXPOWER_LIST,
|
|
"txpower3": TXPOWER3_LIST,
|
|
"voice": VOICE_LIST,
|
|
"vox": VOX_LIST,
|
|
"widenarr": BANDWIDTH_LIST,
|
|
"workmode": WORKMODE_LIST,
|
|
"wtled": COLOR_LIST
|
|
}
|
|
|
|
GMRS_FREQS1 = [462.5625, 462.5875, 462.6125, 462.6375, 462.6625,
|
|
462.6875, 462.7125]
|
|
GMRS_FREQS2 = [467.5625, 467.5875, 467.6125, 467.6375, 467.6625,
|
|
467.6875, 467.7125]
|
|
GMRS_FREQS3 = [462.5500, 462.5750, 462.6000, 462.6250, 462.6500,
|
|
462.6750, 462.7000, 462.7250]
|
|
GMRS_FREQS = GMRS_FREQS1 + GMRS_FREQS2 + GMRS_FREQS3 * 2
|
|
|
|
|
|
def _do_status(radio, block):
|
|
status = chirp_common.Status()
|
|
status.msg = "Cloning"
|
|
status.cur = block
|
|
status.max = radio.get_memsize()
|
|
radio.status_fn(status)
|
|
|
|
UV5R_MODEL_ORIG = "\x50\xBB\xFF\x01\x25\x98\x4D"
|
|
UV5R_MODEL_291 = "\x50\xBB\xFF\x20\x12\x07\x25"
|
|
UV5R_MODEL_F11 = "\x50\xBB\xFF\x13\xA1\x11\xDD"
|
|
UV5R_MODEL_UV82 = "\x50\xBB\xFF\x20\x13\x01\x05"
|
|
UV5R_MODEL_UV6 = "\x50\xBB\xFF\x20\x12\x08\x23"
|
|
UV5R_MODEL_UV6_ORIG = "\x50\xBB\xFF\x12\x03\x98\x4D"
|
|
UV5R_MODEL_A58 = "\x50\xBB\xFF\x20\x14\x04\x13"
|
|
UV5R_MODEL_UV5G = "\x50\xBB\xFF\x20\x12\x06\x25"
|
|
|
|
|
|
def _upper_band_from_data(data):
|
|
return data[0x03:0x04]
|
|
|
|
|
|
def _upper_band_from_image(radio):
|
|
return _upper_band_from_data(radio.get_mmap())
|
|
|
|
|
|
def _firmware_version_from_data(data, version_start, version_stop):
|
|
version_tag = data[version_start:version_stop]
|
|
return version_tag
|
|
|
|
|
|
def _firmware_version_from_image(radio):
|
|
version = _firmware_version_from_data(radio.get_mmap(),
|
|
radio._fw_ver_file_start,
|
|
radio._fw_ver_file_stop)
|
|
LOG.debug("_firmware_version_from_image: " + util.hexprint(version))
|
|
return version
|
|
|
|
|
|
def _do_ident(radio, magic, secondack=True):
|
|
serial = radio.pipe
|
|
serial.timeout = 1
|
|
|
|
LOG.info("Sending Magic: %s" % util.hexprint(magic))
|
|
for byte in magic:
|
|
serial.write(byte)
|
|
time.sleep(0.01)
|
|
ack = serial.read(1)
|
|
|
|
if ack != "\x06":
|
|
if ack:
|
|
LOG.debug(repr(ack))
|
|
raise errors.RadioError("Radio did not respond")
|
|
|
|
serial.write("\x02")
|
|
|
|
# Until recently, the "ident" returned by the radios supported by this
|
|
# driver have always been 8 bytes long. The image sturcture is the 8 byte
|
|
# "ident" followed by the downloaded memory data. So all of the settings
|
|
# structures are offset by 8 bytes. The ident returned from a UV-6 radio
|
|
# can be 8 bytes (original model) or now 12 bytes.
|
|
#
|
|
# To accomodate this, the "ident" is now read one byte at a time until the
|
|
# last byte ("\xdd") is encountered. The bytes containing the value "\x01"
|
|
# are discarded to shrink the "ident" length down to 8 bytes to keep the
|
|
# image data aligned with the existing settings structures.
|
|
|
|
# Ok, get the response
|
|
response = ""
|
|
for i in range(1, 13):
|
|
byte = serial.read(1)
|
|
response += byte
|
|
# stop reading once the last byte ("\xdd") is encountered
|
|
if byte == "\xdd":
|
|
break
|
|
|
|
# check if response is OK
|
|
if len(response) in [8, 12]:
|
|
# DEBUG
|
|
LOG.info("Valid response, got this:")
|
|
LOG.debug(util.hexprint(response))
|
|
if len(response) == 12:
|
|
ident = response[0] + response[3] + response[5] + response[7:]
|
|
else:
|
|
ident = response
|
|
else:
|
|
# bad response
|
|
msg = "Unexpected response, got this:"
|
|
msg += util.hexprint(response)
|
|
LOG.debug(msg)
|
|
raise errors.RadioError("Unexpected response from radio.")
|
|
|
|
if secondack:
|
|
serial.write("\x06")
|
|
ack = serial.read(1)
|
|
if ack != "\x06":
|
|
raise errors.RadioError("Radio refused clone")
|
|
|
|
return ident
|
|
|
|
|
|
def _read_block(radio, start, size, first_command=False):
|
|
msg = struct.pack(">BHB", ord("S"), start, size)
|
|
radio.pipe.write(msg)
|
|
|
|
if first_command is False:
|
|
ack = radio.pipe.read(1)
|
|
if ack != "\x06":
|
|
raise errors.RadioError(
|
|
"Radio refused to send second block 0x%04x" % start)
|
|
|
|
answer = radio.pipe.read(4)
|
|
if len(answer) != 4:
|
|
raise errors.RadioError("Radio refused to send block 0x%04x" % start)
|
|
|
|
cmd, addr, length = struct.unpack(">BHB", answer)
|
|
if cmd != ord("X") or addr != start or length != size:
|
|
LOG.error("Invalid answer for block 0x%04x:" % start)
|
|
LOG.debug("CMD: %s ADDR: %04x SIZE: %02x" % (cmd, addr, length))
|
|
raise errors.RadioError("Unknown response from radio")
|
|
|
|
chunk = radio.pipe.read(0x40)
|
|
if not chunk:
|
|
raise errors.RadioError("Radio did not send block 0x%04x" % start)
|
|
elif len(chunk) != size:
|
|
LOG.error("Chunk length was 0x%04i" % len(chunk))
|
|
raise errors.RadioError("Radio sent incomplete block 0x%04x" % start)
|
|
|
|
radio.pipe.write("\x06")
|
|
time.sleep(0.05)
|
|
|
|
return chunk
|
|
|
|
|
|
def _get_radio_firmware_version(radio):
|
|
if radio.MODEL == "BJ-UV55":
|
|
block = _read_block(radio, 0x1FF0, 0x40, True)
|
|
version = block[0:6]
|
|
else:
|
|
block1 = _read_block(radio, 0x1EC0, 0x40, True)
|
|
block2 = _read_block(radio, 0x1F00, 0x40, False)
|
|
block = block1 + block2
|
|
version = block[48:62]
|
|
return version
|
|
|
|
|
|
IDENT_BLACKLIST = {
|
|
"\x50\x0D\x0C\x20\x16\x03\x28": "Radio identifies as BTECH UV-5X3",
|
|
"\x50\xBB\xFF\x20\x12\x06\x25": "Radio identifies as Radioddity UV-5G",
|
|
}
|
|
|
|
|
|
def _ident_radio(radio):
|
|
for magic in radio._idents:
|
|
error = None
|
|
try:
|
|
data = _do_ident(radio, magic)
|
|
return data
|
|
except errors.RadioError, e:
|
|
LOG.error("uv5r._ident_radio: %s", e)
|
|
error = e
|
|
time.sleep(2)
|
|
|
|
for magic, reason in IDENT_BLACKLIST.items():
|
|
try:
|
|
_do_ident(radio, magic, secondack=False)
|
|
except errors.RadioError as e:
|
|
# No match, try the next one
|
|
continue
|
|
|
|
# If we got here, it means we identified the radio as
|
|
# something other than one of our valid idents. Warn
|
|
# the user so they can do the right thing.
|
|
LOG.warning(('Identified radio as a blacklisted model '
|
|
'(details: %s)') % reason)
|
|
raise errors.RadioError(('%s. Please choose the proper vendor/'
|
|
'model and try again.') % reason)
|
|
|
|
if error:
|
|
raise error
|
|
raise errors.RadioError("Radio did not respond")
|
|
|
|
|
|
def _do_download(radio):
|
|
data = _ident_radio(radio)
|
|
|
|
radio_version = _get_radio_firmware_version(radio)
|
|
LOG.info("Radio Version is %s" % repr(radio_version))
|
|
|
|
if "HN5RV" in radio_version:
|
|
# A radio with HN5RV firmware has been detected. It could be a
|
|
# UV-5R style radio with HIGH/LOW power levels or it could be a
|
|
# BF-F8HP style radio with HIGH/MID/LOW power levels.
|
|
# We are going to count on the user to make the right choice and
|
|
# then append that model type to the end of the image so it can
|
|
# be properly detected when loaded.
|
|
append_model = True
|
|
elif "\xFF" * 7 in radio_version:
|
|
# A radio UV-5R style radio that reports no firmware version has
|
|
# been detected.
|
|
# We are going to count on the user to make the right choice and
|
|
# then append that model type to the end of the image so it can
|
|
# be properly detected when loaded.
|
|
append_model = True
|
|
elif "\x20" * 14 in radio_version:
|
|
# A radio UV-5R style radio that reports no firmware version has
|
|
# been detected.
|
|
# We are going to count on the user to make the right choice and
|
|
# then append that model type to the end of the image so it can
|
|
# be properly detected when loaded.
|
|
append_model = True
|
|
elif not any(type in radio_version for type in radio._basetype):
|
|
# This radio can't be properly detected by parsing its firmware
|
|
# version.
|
|
raise errors.RadioError("Incorrect 'Model' selected.")
|
|
else:
|
|
# This radio can be properly detected by parsing its firmware version.
|
|
# There is no need to append its model type to the end of the image.
|
|
append_model = False
|
|
|
|
# Main block
|
|
LOG.debug("downloading main block...")
|
|
for i in range(0, 0x1800, 0x40):
|
|
data += _read_block(radio, i, 0x40, False)
|
|
_do_status(radio, i)
|
|
_do_status(radio, radio.get_memsize())
|
|
LOG.debug("done.")
|
|
if radio._aux_block:
|
|
LOG.debug("downloading aux block...")
|
|
# Auxiliary block starts at 0x1ECO (?)
|
|
for i in range(0x1EC0, 0x2000, 0x40):
|
|
data += _read_block(radio, i, 0x40, False)
|
|
|
|
if append_model:
|
|
data += radio.MODEL.ljust(8)
|
|
|
|
LOG.debug("done.")
|
|
return memmap.MemoryMap(data)
|
|
|
|
|
|
def _send_block(radio, addr, data):
|
|
msg = struct.pack(">BHB", ord("X"), addr, len(data))
|
|
radio.pipe.write(msg + data)
|
|
time.sleep(0.05)
|
|
|
|
ack = radio.pipe.read(1)
|
|
if ack != "\x06":
|
|
raise errors.RadioError("Radio refused to accept block 0x%04x" % addr)
|
|
|
|
|
|
def _do_upload(radio):
|
|
ident = _ident_radio(radio)
|
|
radio_upper_band = ident[3:4]
|
|
image_upper_band = _upper_band_from_image(radio)
|
|
|
|
if image_upper_band == vhf_220_radio or radio_upper_band == vhf_220_radio:
|
|
if image_upper_band != radio_upper_band:
|
|
raise errors.RadioError("Image not supported by radio")
|
|
|
|
image_version = _firmware_version_from_image(radio)
|
|
radio_version = _get_radio_firmware_version(radio)
|
|
LOG.info("Image Version is %s" % repr(image_version))
|
|
LOG.info("Radio Version is %s" % repr(radio_version))
|
|
|
|
# default ranges
|
|
_ranges_main_default = [
|
|
(0x0008, 0x0CF8),
|
|
(0x0D08, 0x0DF8),
|
|
(0x0E08, 0x1808)
|
|
]
|
|
_ranges_aux_default = [
|
|
(0x1EC0, 0x1EF0),
|
|
]
|
|
|
|
# extra aux ranges
|
|
_ranges_aux_extra = [
|
|
(0x1F60, 0x1F70),
|
|
(0x1F80, 0x1F90),
|
|
(0x1FC0, 0x1FD0)
|
|
]
|
|
|
|
if image_version == radio_version:
|
|
image_matched_radio = True
|
|
if image_version.startswith("HN5RV"):
|
|
ranges_main = _ranges_main_default
|
|
ranges_aux = _ranges_aux_default + _ranges_aux_extra
|
|
elif image_version == 0xFF * 7:
|
|
ranges_main = _ranges_main_default
|
|
ranges_aux = _ranges_aux_default + _ranges_aux_extra
|
|
else:
|
|
ranges_main = radio._ranges_main
|
|
ranges_aux = radio._ranges_aux
|
|
elif any(type in radio_version for type in radio._basetype):
|
|
image_matched_radio = False
|
|
ranges_main = _ranges_main_default
|
|
ranges_aux = _ranges_aux_default
|
|
else:
|
|
msg = ("The upload was stopped because the firmware "
|
|
"version of the image (%s) does not match that "
|
|
"of the radio (%s).")
|
|
raise errors.RadioError(msg % (image_version, radio_version))
|
|
|
|
if not radio._aux_block:
|
|
image_matched_radio = True
|
|
|
|
# Main block
|
|
for start_addr, end_addr in ranges_main:
|
|
for i in range(start_addr, end_addr, 0x10):
|
|
_send_block(radio, i - 0x08, radio.get_mmap()[i:i + 0x10])
|
|
_do_status(radio, i)
|
|
_do_status(radio, radio.get_memsize())
|
|
|
|
if len(radio.get_mmap().get_packed()) == 0x1808:
|
|
LOG.info("Old image, not writing aux block")
|
|
return # Old image, no aux block
|
|
|
|
# Auxiliary block at radio address 0x1EC0, our offset 0x1808
|
|
for start_addr, end_addr in ranges_aux:
|
|
for i in range(start_addr, end_addr, 0x10):
|
|
addr = 0x1808 + (i - 0x1EC0)
|
|
_send_block(radio, i, radio.get_mmap()[addr:addr + 0x10])
|
|
|
|
if not image_matched_radio:
|
|
msg = ("Upload finished, but the 'Other Settings' "
|
|
"could not be sent because the firmware "
|
|
"version of the image (%s) does not match "
|
|
"that of the radio (%s).")
|
|
raise errors.RadioError(msg % (image_version, radio_version))
|
|
|
|
UV5R_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=4.00),
|
|
chirp_common.PowerLevel("Low", watts=1.00)]
|
|
|
|
UV5R_POWER_LEVELS3 = [chirp_common.PowerLevel("High", watts=8.00),
|
|
chirp_common.PowerLevel("Med", watts=4.00),
|
|
chirp_common.PowerLevel("Low", watts=1.00)]
|
|
|
|
UV5R_DTCS = sorted(chirp_common.DTCS_CODES + [645])
|
|
|
|
UV5R_CHARSET = chirp_common.CHARSET_UPPER_NUMERIC + \
|
|
"!@#$%^&*()+-=[]:\";'<>?,./"
|
|
|
|
|
|
def model_match(cls, data):
|
|
"""Match the opened/downloaded image to the correct version"""
|
|
|
|
if len(data) == 0x1950:
|
|
rid = data[0x1948:0x1950]
|
|
return rid.startswith(cls.MODEL)
|
|
elif len(data) == 0x1948:
|
|
rid = data[cls._fw_ver_file_start:cls._fw_ver_file_stop]
|
|
if any(type in rid for type in cls._basetype):
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
|
|
class BaofengUV5R(chirp_common.CloneModeRadio):
|
|
|
|
"""Baofeng UV-5R"""
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-5R"
|
|
BAUD_RATE = 9600
|
|
|
|
_memsize = 0x1808
|
|
_basetype = BASETYPE_UV5R
|
|
_idents = [UV5R_MODEL_291,
|
|
UV5R_MODEL_ORIG
|
|
]
|
|
_vhf_range = (136000000, 174000000)
|
|
_220_range = (220000000, 260000000)
|
|
_uhf_range = (400000000, 520000000)
|
|
_aux_block = True
|
|
_tri_power = False
|
|
_gmrs = False
|
|
_mem_params = (0x1828 # poweron_msg offset
|
|
)
|
|
# offset of fw version in image file
|
|
_fw_ver_file_start = 0x1838
|
|
_fw_ver_file_stop = 0x1846
|
|
|
|
_ranges_main = [
|
|
(0x0008, 0x1808),
|
|
]
|
|
_ranges_aux = [
|
|
(0x1EC0, 0x2000),
|
|
]
|
|
_valid_chars = UV5R_CHARSET
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = \
|
|
('Due to the fact that the manufacturer continues to '
|
|
'release new versions of the firmware with obscure and '
|
|
'hard-to-track changes, this driver may not work with '
|
|
'your device. Thus far and to the best knowledge of the '
|
|
'author, no UV-5R radios have been harmed by using CHIRP. '
|
|
'However, proceed at your own risk!')
|
|
rp.pre_download = _(dedent("""\
|
|
1. Turn radio off.
|
|
2. Connect cable to mic/spkr connector.
|
|
3. Make sure connector is firmly connected.
|
|
4. Turn radio on (volume may need to be set at 100%).
|
|
5. Ensure that the radio is tuned to channel with no activity.
|
|
6. Click OK to download image from device."""))
|
|
rp.pre_upload = _(dedent("""\
|
|
1. Turn radio off.
|
|
2. Connect cable to mic/spkr connector.
|
|
3. Make sure connector is firmly connected.
|
|
4. Turn radio on (volume may need to be set at 100%).
|
|
5. Ensure that the radio is tuned to channel with no activity.
|
|
6. Click OK to upload image to device."""))
|
|
return rp
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.has_cross = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_tuning_step = False
|
|
rf.can_odd_split = True
|
|
rf.valid_name_length = 7
|
|
rf.valid_characters = self._valid_chars
|
|
rf.valid_skips = ["", "S"]
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
|
|
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
|
|
rf.valid_power_levels = UV5R_POWER_LEVELS
|
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
|
rf.valid_modes = ["FM", "NFM"]
|
|
rf.valid_tuning_steps = STEPS
|
|
rf.valid_dtcs_codes = UV5R_DTCS
|
|
|
|
normal_bands = [self._vhf_range, self._uhf_range]
|
|
rax_bands = [self._vhf_range, self._220_range]
|
|
|
|
if self._mmap is None:
|
|
rf.valid_bands = [normal_bands[0], rax_bands[1], normal_bands[1]]
|
|
elif not self._is_orig() and self._my_upper_band() == vhf_220_radio:
|
|
rf.valid_bands = rax_bands
|
|
else:
|
|
rf.valid_bands = normal_bands
|
|
rf.memory_bounds = (0, 127)
|
|
return rf
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
match_size = False
|
|
match_model = False
|
|
if len(filedata) in [0x1808, 0x1948, 0x1950]:
|
|
match_size = True
|
|
match_model = model_match(cls, filedata)
|
|
|
|
if match_size and match_model:
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT % self._mem_params, self._mmap)
|
|
|
|
def validate_memory(self, mem):
|
|
msgs = chirp_common.CloneModeRadio.validate_memory(self, mem)
|
|
|
|
_msg_duplex2 = 'Memory location only supports "(None)" or "off"'
|
|
_msg_duplex3 = 'Memory location only supports "(None)", "+" or "off"'
|
|
|
|
if self._gmrs:
|
|
if mem.number < 1 or mem.number > 30:
|
|
if float(mem.freq) / 1000000 in GMRS_FREQS1:
|
|
if mem.duplex not in ['', 'off']:
|
|
# warn user wrong Duplex
|
|
msgs.append(chirp_common.ValidationError(_msg_duplex2))
|
|
|
|
if float(mem.freq) / 1000000 in GMRS_FREQS2:
|
|
if mem.duplex not in ['', 'off']:
|
|
# warn user wrong Duplex
|
|
msgs.append(chirp_common.ValidationError(_msg_duplex2))
|
|
|
|
if float(mem.freq) / 1000000 in GMRS_FREQS3:
|
|
if mem.duplex not in ['', '+', 'off']:
|
|
# warn user wrong Duplex
|
|
msgs.append(chirp_common.ValidationError(_msg_duplex3))
|
|
|
|
return msgs
|
|
|
|
def sync_in(self):
|
|
try:
|
|
self._mmap = _do_download(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
try:
|
|
_do_upload(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number])
|
|
|
|
def _is_txinh(self, _mem):
|
|
raw_tx = ""
|
|
for i in range(0, 4):
|
|
raw_tx += _mem.txfreq[i].get_raw()
|
|
return raw_tx == "\xFF\xFF\xFF\xFF"
|
|
|
|
def _get_mem(self, number):
|
|
return self._memobj.memory[number]
|
|
|
|
def _get_nam(self, number):
|
|
return self._memobj.names[number]
|
|
|
|
def get_memory(self, number):
|
|
_mem = self._get_mem(number)
|
|
_nam = self._get_nam(number)
|
|
|
|
mem = chirp_common.Memory()
|
|
mem.number = number
|
|
|
|
if _mem.get_raw()[0] == "\xff":
|
|
mem.empty = True
|
|
return mem
|
|
|
|
mem.freq = int(_mem.rxfreq) * 10
|
|
|
|
if self._is_txinh(_mem):
|
|
mem.duplex = "off"
|
|
mem.offset = 0
|
|
elif int(_mem.rxfreq) == int(_mem.txfreq):
|
|
mem.duplex = ""
|
|
mem.offset = 0
|
|
elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000:
|
|
mem.duplex = "split"
|
|
mem.offset = int(_mem.txfreq) * 10
|
|
else:
|
|
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
|
|
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10
|
|
|
|
for char in _nam.name:
|
|
if str(char) == "\xFF":
|
|
char = " " # The UV-5R software may have 0xFF mid-name
|
|
mem.name += str(char)
|
|
mem.name = mem.name.rstrip()
|
|
|
|
dtcs_pol = ["N", "N"]
|
|
|
|
if _mem.txtone in [0, 0xFFFF]:
|
|
txmode = ""
|
|
elif _mem.txtone >= 0x0258:
|
|
txmode = "Tone"
|
|
mem.rtone = int(_mem.txtone) / 10.0
|
|
elif _mem.txtone <= 0x0258:
|
|
txmode = "DTCS"
|
|
if _mem.txtone > 0x69:
|
|
index = _mem.txtone - 0x6A
|
|
dtcs_pol[0] = "R"
|
|
else:
|
|
index = _mem.txtone - 1
|
|
mem.dtcs = UV5R_DTCS[index]
|
|
else:
|
|
LOG.warn("Bug: txtone is %04x" % _mem.txtone)
|
|
|
|
if _mem.rxtone in [0, 0xFFFF]:
|
|
rxmode = ""
|
|
elif _mem.rxtone >= 0x0258:
|
|
rxmode = "Tone"
|
|
mem.ctone = int(_mem.rxtone) / 10.0
|
|
elif _mem.rxtone <= 0x0258:
|
|
rxmode = "DTCS"
|
|
if _mem.rxtone >= 0x6A:
|
|
index = _mem.rxtone - 0x6A
|
|
dtcs_pol[1] = "R"
|
|
else:
|
|
index = _mem.rxtone - 1
|
|
mem.rx_dtcs = UV5R_DTCS[index]
|
|
else:
|
|
LOG.warn("Bug: rxtone is %04x" % _mem.rxtone)
|
|
|
|
if txmode == "Tone" and not rxmode:
|
|
mem.tmode = "Tone"
|
|
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
|
|
mem.tmode = "TSQL"
|
|
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
|
|
mem.tmode = "DTCS"
|
|
elif rxmode or txmode:
|
|
mem.tmode = "Cross"
|
|
mem.cross_mode = "%s->%s" % (txmode, rxmode)
|
|
|
|
mem.dtcs_polarity = "".join(dtcs_pol)
|
|
|
|
if not _mem.scan:
|
|
mem.skip = "S"
|
|
|
|
if self._tri_power:
|
|
levels = UV5R_POWER_LEVELS3
|
|
else:
|
|
levels = UV5R_POWER_LEVELS
|
|
try:
|
|
mem.power = levels[_mem.lowpower]
|
|
except IndexError:
|
|
LOG.error("Radio reported invalid power level %s (in %s)" %
|
|
(_mem.lowpower, levels))
|
|
mem.power = levels[0]
|
|
|
|
mem.mode = _mem.wide and "FM" or "NFM"
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
rs = RadioSetting("bcl", "BCL",
|
|
RadioSettingValueBoolean(_mem.bcl))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("pttid", "PTT ID",
|
|
RadioSettingValueList(PTTID_LIST,
|
|
PTTID_LIST[_mem.pttid]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("scode", "PTT ID Code",
|
|
RadioSettingValueList(PTTIDCODE_LIST,
|
|
PTTIDCODE_LIST[_mem.scode]))
|
|
mem.extra.append(rs)
|
|
|
|
return mem
|
|
|
|
def _set_mem(self, number):
|
|
return self._memobj.memory[number]
|
|
|
|
def _set_nam(self, number):
|
|
return self._memobj.names[number]
|
|
|
|
def set_memory(self, mem):
|
|
_mem = self._get_mem(mem.number)
|
|
_nam = self._get_nam(mem.number)
|
|
|
|
if mem.empty:
|
|
_mem.set_raw("\xff" * 16)
|
|
_nam.set_raw("\xff" * 16)
|
|
return
|
|
|
|
was_empty = False
|
|
# same method as used in get_memory to find
|
|
# out whether a raw memory is empty
|
|
if _mem.get_raw()[0] == "\xff":
|
|
was_empty = True
|
|
LOG.debug("UV5R: this mem was empty")
|
|
else:
|
|
# memorize old extra-values before erasing the whole memory
|
|
# used to solve issue 4121
|
|
LOG.debug("mem was not empty, memorize extra-settings")
|
|
prev_bcl = _mem.bcl.get_value()
|
|
prev_scode = _mem.scode.get_value()
|
|
prev_pttid = _mem.pttid.get_value()
|
|
|
|
_mem.set_raw("\x00" * 16)
|
|
|
|
if self._gmrs:
|
|
if mem.number >= 1 and mem.number <= 30:
|
|
GMRS_FREQ = int(GMRS_FREQS[mem.number - 1] * 1000000)
|
|
mem.freq = GMRS_FREQ
|
|
if mem.number <= 22:
|
|
mem.duplex = ''
|
|
mem.offset = 0
|
|
if mem.number >= 8 and mem.number <= 14:
|
|
mem.mode = "NFM"
|
|
mem.power = UV5R_POWER_LEVELS[1]
|
|
if mem.number > 22:
|
|
mem.duplex = '+'
|
|
mem.offset = 5000000
|
|
elif float(mem.freq) / 1000000 in GMRS_FREQS:
|
|
if float(mem.freq) / 1000000 in GMRS_FREQS2:
|
|
mem.offset = 0
|
|
mem.mode = "NFM"
|
|
mem.power = UV5R_POWER_LEVELS[1]
|
|
if float(mem.freq) / 1000000 in GMRS_FREQS3:
|
|
if mem.duplex == '+':
|
|
mem.offset = 5000000
|
|
else:
|
|
mem.offset = 0
|
|
else:
|
|
mem.duplex = 'off'
|
|
mem.offset = 0
|
|
|
|
_mem.rxfreq = mem.freq / 10
|
|
|
|
if mem.duplex == "off":
|
|
for i in range(0, 4):
|
|
_mem.txfreq[i].set_raw("\xFF")
|
|
elif mem.duplex == "split":
|
|
_mem.txfreq = mem.offset / 10
|
|
elif mem.duplex == "+":
|
|
_mem.txfreq = (mem.freq + mem.offset) / 10
|
|
elif mem.duplex == "-":
|
|
_mem.txfreq = (mem.freq - mem.offset) / 10
|
|
else:
|
|
_mem.txfreq = mem.freq / 10
|
|
|
|
_namelength = self.get_features().valid_name_length
|
|
for i in range(_namelength):
|
|
try:
|
|
_nam.name[i] = mem.name[i]
|
|
except IndexError:
|
|
_nam.name[i] = "\xFF"
|
|
|
|
rxmode = txmode = ""
|
|
if mem.tmode == "Tone":
|
|
_mem.txtone = int(mem.rtone * 10)
|
|
_mem.rxtone = 0
|
|
elif mem.tmode == "TSQL":
|
|
_mem.txtone = int(mem.ctone * 10)
|
|
_mem.rxtone = int(mem.ctone * 10)
|
|
elif mem.tmode == "DTCS":
|
|
rxmode = txmode = "DTCS"
|
|
_mem.txtone = UV5R_DTCS.index(mem.dtcs) + 1
|
|
_mem.rxtone = UV5R_DTCS.index(mem.dtcs) + 1
|
|
elif mem.tmode == "Cross":
|
|
txmode, rxmode = mem.cross_mode.split("->", 1)
|
|
if txmode == "Tone":
|
|
_mem.txtone = int(mem.rtone * 10)
|
|
elif txmode == "DTCS":
|
|
_mem.txtone = UV5R_DTCS.index(mem.dtcs) + 1
|
|
else:
|
|
_mem.txtone = 0
|
|
if rxmode == "Tone":
|
|
_mem.rxtone = int(mem.ctone * 10)
|
|
elif rxmode == "DTCS":
|
|
_mem.rxtone = UV5R_DTCS.index(mem.rx_dtcs) + 1
|
|
else:
|
|
_mem.rxtone = 0
|
|
else:
|
|
_mem.rxtone = 0
|
|
_mem.txtone = 0
|
|
|
|
if txmode == "DTCS" and mem.dtcs_polarity[0] == "R":
|
|
_mem.txtone += 0x69
|
|
if rxmode == "DTCS" and mem.dtcs_polarity[1] == "R":
|
|
_mem.rxtone += 0x69
|
|
|
|
_mem.scan = mem.skip != "S"
|
|
_mem.wide = mem.mode == "FM"
|
|
|
|
if mem.power:
|
|
if self._tri_power:
|
|
levels = [str(l) for l in UV5R_POWER_LEVELS3]
|
|
_mem.lowpower = levels.index(str(mem.power))
|
|
else:
|
|
_mem.lowpower = UV5R_POWER_LEVELS.index(mem.power)
|
|
else:
|
|
_mem.lowpower = 0
|
|
|
|
if not was_empty:
|
|
# restoring old extra-settings (issue 4121
|
|
_mem.bcl.set_value(prev_bcl)
|
|
_mem.scode.set_value(prev_scode)
|
|
_mem.pttid.set_value(prev_pttid)
|
|
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
|
|
def _is_orig(self):
|
|
version_tag = _firmware_version_from_image(self)
|
|
LOG.debug("@_is_orig, version_tag: %s", util.hexprint(version_tag))
|
|
try:
|
|
if 'BFB' in version_tag:
|
|
idx = version_tag.index("BFB") + 3
|
|
version = int(version_tag[idx:idx + 3])
|
|
return version < 291
|
|
return False
|
|
except:
|
|
pass
|
|
raise errors.RadioError("Unable to parse version string %s" %
|
|
version_tag)
|
|
|
|
def _my_version(self):
|
|
version_tag = _firmware_version_from_image(self)
|
|
if 'BFB' in version_tag:
|
|
idx = version_tag.index("BFB") + 3
|
|
return int(version_tag[idx:idx + 3])
|
|
|
|
raise Exception("Unrecognized firmware version string")
|
|
|
|
def _my_upper_band(self):
|
|
band_tag = _upper_band_from_image(self)
|
|
return band_tag
|
|
|
|
def _get_settings(self):
|
|
_ani = self._memobj.ani
|
|
_fm_presets = self._memobj.fm_presets
|
|
_settings = self._memobj.settings
|
|
_squelch = self._memobj.squelch_new
|
|
_vfoa = self._memobj.vfoa
|
|
_vfob = self._memobj.vfob
|
|
_wmchannel = self._memobj.wmchannel
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
advanced = RadioSettingGroup("advanced", "Advanced Settings")
|
|
|
|
group = RadioSettings(basic, advanced)
|
|
|
|
rs = RadioSetting("squelch", "Carrier Squelch Level",
|
|
RadioSettingValueInteger(0, 9, _settings.squelch))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("save", "Battery Saver",
|
|
RadioSettingValueList(
|
|
SAVE_LIST, SAVE_LIST[_settings.save]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("vox", "VOX Sensitivity",
|
|
RadioSettingValueList(
|
|
VOX_LIST, VOX_LIST[_settings.vox]))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL == "UV-6":
|
|
# NOTE: The UV-6 calls this byte voxenable, but the UV-5R calls it
|
|
# autolk. Since this is a minor difference, it will be referred to
|
|
# by the wrong name for the UV-6.
|
|
rs = RadioSetting("autolk", "Vox",
|
|
RadioSettingValueBoolean(_settings.autolk))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL != "UV-6":
|
|
rs = RadioSetting("abr", "Backlight Timeout",
|
|
RadioSettingValueInteger(0, 24, _settings.abr))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("tdr", "Dual Watch",
|
|
RadioSettingValueBoolean(_settings.tdr))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL == "UV-6":
|
|
rs = RadioSetting("tdrch", "Dual Watch Channel",
|
|
RadioSettingValueList(
|
|
TDRCH_LIST, TDRCH_LIST[_settings.tdrch]))
|
|
advanced.append(rs)
|
|
|
|
rs = RadioSetting("tdrab", "Dual Watch TX Priority",
|
|
RadioSettingValueBoolean(_settings.tdrab))
|
|
advanced.append(rs)
|
|
else:
|
|
rs = RadioSetting("tdrab", "Dual Watch TX Priority",
|
|
RadioSettingValueList(
|
|
TDRAB_LIST, TDRAB_LIST[_settings.tdrab]))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL == "UV-6":
|
|
rs = RadioSetting("alarm", "Alarm Sound",
|
|
RadioSettingValueBoolean(_settings.alarm))
|
|
advanced.append(rs)
|
|
|
|
if _settings.almod > 0x02:
|
|
val = 0x01
|
|
else:
|
|
val = _settings.almod
|
|
rs = RadioSetting("almod", "Alarm Mode",
|
|
RadioSettingValueList(
|
|
ALMOD_LIST, ALMOD_LIST[val]))
|
|
advanced.append(rs)
|
|
|
|
rs = RadioSetting("beep", "Beep",
|
|
RadioSettingValueBoolean(_settings.beep))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("timeout", "Timeout Timer",
|
|
RadioSettingValueList(
|
|
TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout]))
|
|
basic.append(rs)
|
|
|
|
if ((self._is_orig() and self._my_version() < 251) or
|
|
(self.MODEL in ["TI-F8+", "TS-T9+"])):
|
|
rs = RadioSetting("voice", "Voice",
|
|
RadioSettingValueBoolean(_settings.voice))
|
|
advanced.append(rs)
|
|
else:
|
|
rs = RadioSetting("voice", "Voice",
|
|
RadioSettingValueList(
|
|
VOICE_LIST, VOICE_LIST[_settings.voice]))
|
|
advanced.append(rs)
|
|
|
|
rs = RadioSetting("screv", "Scan Resume",
|
|
RadioSettingValueList(
|
|
RESUME_LIST, RESUME_LIST[_settings.screv]))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL != "UV-6":
|
|
rs = RadioSetting("mdfa", "Display Mode (A)",
|
|
RadioSettingValueList(
|
|
MODE_LIST, MODE_LIST[_settings.mdfa]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("mdfb", "Display Mode (B)",
|
|
RadioSettingValueList(
|
|
MODE_LIST, MODE_LIST[_settings.mdfb]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("bcl", "Busy Channel Lockout",
|
|
RadioSettingValueBoolean(_settings.bcl))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL != "UV-6":
|
|
rs = RadioSetting("autolk", "Automatic Key Lock",
|
|
RadioSettingValueBoolean(_settings.autolk))
|
|
advanced.append(rs)
|
|
|
|
rs = RadioSetting("fmradio", "Broadcast FM Radio",
|
|
RadioSettingValueBoolean(_settings.fmradio))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL != "UV-6":
|
|
rs = RadioSetting("wtled", "Standby LED Color",
|
|
RadioSettingValueList(
|
|
COLOR_LIST, COLOR_LIST[_settings.wtled]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("rxled", "RX LED Color",
|
|
RadioSettingValueList(
|
|
COLOR_LIST, COLOR_LIST[_settings.rxled]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("txled", "TX LED Color",
|
|
RadioSettingValueList(
|
|
COLOR_LIST, COLOR_LIST[_settings.txled]))
|
|
basic.append(rs)
|
|
|
|
if isinstance(self, BaofengUV82Radio):
|
|
rs = RadioSetting("roger", "Roger Beep (TX)",
|
|
RadioSettingValueBoolean(_settings.roger))
|
|
basic.append(rs)
|
|
rs = RadioSetting("rogerrx", "Roger Beep (RX)",
|
|
RadioSettingValueList(
|
|
ROGERRX_LIST,
|
|
ROGERRX_LIST[_settings.rogerrx]))
|
|
basic.append(rs)
|
|
else:
|
|
rs = RadioSetting("roger", "Roger Beep",
|
|
RadioSettingValueBoolean(_settings.roger))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("ste", "Squelch Tail Eliminate (HT to HT)",
|
|
RadioSettingValueBoolean(_settings.ste))
|
|
advanced.append(rs)
|
|
|
|
rs = RadioSetting("rpste", "Squelch Tail Eliminate (repeater)",
|
|
RadioSettingValueList(
|
|
RPSTE_LIST, RPSTE_LIST[_settings.rpste]))
|
|
advanced.append(rs)
|
|
|
|
rs = RadioSetting("rptrl", "STE Repeater Delay",
|
|
RadioSettingValueList(
|
|
STEDELAY_LIST, STEDELAY_LIST[_settings.rptrl]))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL != "UV-6":
|
|
rs = RadioSetting("reset", "RESET Menu",
|
|
RadioSettingValueBoolean(_settings.reset))
|
|
advanced.append(rs)
|
|
|
|
rs = RadioSetting("menu", "All Menus",
|
|
RadioSettingValueBoolean(_settings.menu))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL == "F-11":
|
|
# this is an F-11 only feature
|
|
rs = RadioSetting("vfomrlock", "VFO/MR Button",
|
|
RadioSettingValueBoolean(_settings.vfomrlock))
|
|
advanced.append(rs)
|
|
|
|
if isinstance(self, BaofengUV82Radio):
|
|
# this is a UV-82C only feature
|
|
rs = RadioSetting("vfomrlock", "VFO/MR Switching (UV-82C only)",
|
|
RadioSettingValueBoolean(_settings.vfomrlock))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL == "UV-82HP":
|
|
# this is a UV-82HP only feature
|
|
rs = RadioSetting(
|
|
"vfomrlock", "VFO/MR Switching (BTech UV-82HP only)",
|
|
RadioSettingValueBoolean(_settings.vfomrlock))
|
|
advanced.append(rs)
|
|
|
|
if isinstance(self, BaofengUV82Radio):
|
|
# this is an UV-82C only feature
|
|
rs = RadioSetting("singleptt", "Single PTT (UV-82C only)",
|
|
RadioSettingValueBoolean(_settings.singleptt))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL == "UV-82HP":
|
|
# this is an UV-82HP only feature
|
|
rs = RadioSetting("singleptt", "Single PTT (BTech UV-82HP only)",
|
|
RadioSettingValueBoolean(_settings.singleptt))
|
|
advanced.append(rs)
|
|
|
|
if self.MODEL == "UV-82HP":
|
|
# this is an UV-82HP only feature
|
|
rs = RadioSetting(
|
|
"tdrch", "Tone Burst Frequency (BTech UV-82HP only)",
|
|
RadioSettingValueList(RTONE_LIST, RTONE_LIST[_settings.tdrch]))
|
|
advanced.append(rs)
|
|
|
|
if len(self._mmap.get_packed()) == 0x1808:
|
|
# Old image, without aux block
|
|
return group
|
|
|
|
if self.MODEL != "UV-6":
|
|
other = RadioSettingGroup("other", "Other Settings")
|
|
group.append(other)
|
|
|
|
def _filter(name):
|
|
filtered = ""
|
|
for char in str(name):
|
|
if char in chirp_common.CHARSET_ASCII:
|
|
filtered += char
|
|
else:
|
|
filtered += " "
|
|
return filtered
|
|
|
|
_msg = self._memobj.firmware_msg
|
|
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
|
|
other.append(rs)
|
|
|
|
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
|
|
other.append(rs)
|
|
|
|
_msg = self._memobj.sixpoweron_msg
|
|
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1",
|
|
RadioSettingValueString(
|
|
0, 7, _filter(_msg.line1)))
|
|
other.append(rs)
|
|
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2",
|
|
RadioSettingValueString(
|
|
0, 7, _filter(_msg.line2)))
|
|
other.append(rs)
|
|
|
|
_msg = self._memobj.poweron_msg
|
|
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
|
|
RadioSettingValueString(
|
|
0, 7, _filter(_msg.line1)))
|
|
other.append(rs)
|
|
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
|
|
RadioSettingValueString(
|
|
0, 7, _filter(_msg.line2)))
|
|
other.append(rs)
|
|
|
|
rs = RadioSetting("ponmsg", "Power-On Message",
|
|
RadioSettingValueList(
|
|
PONMSG_LIST, PONMSG_LIST[_settings.ponmsg]))
|
|
other.append(rs)
|
|
|
|
if self._is_orig():
|
|
limit = "limits_old"
|
|
else:
|
|
limit = "limits_new"
|
|
|
|
vhf_limit = getattr(self._memobj, limit).vhf
|
|
rs = RadioSetting("%s.vhf.lower" % limit, "VHF Lower Limit (MHz)",
|
|
RadioSettingValueInteger(1, 1000,
|
|
vhf_limit.lower))
|
|
other.append(rs)
|
|
|
|
rs = RadioSetting("%s.vhf.upper" % limit, "VHF Upper Limit (MHz)",
|
|
RadioSettingValueInteger(1, 1000,
|
|
vhf_limit.upper))
|
|
other.append(rs)
|
|
|
|
rs = RadioSetting("%s.vhf.enable" % limit, "VHF TX Enabled",
|
|
RadioSettingValueBoolean(vhf_limit.enable))
|
|
other.append(rs)
|
|
|
|
uhf_limit = getattr(self._memobj, limit).uhf
|
|
rs = RadioSetting("%s.uhf.lower" % limit, "UHF Lower Limit (MHz)",
|
|
RadioSettingValueInteger(1, 1000,
|
|
uhf_limit.lower))
|
|
other.append(rs)
|
|
rs = RadioSetting("%s.uhf.upper" % limit, "UHF Upper Limit (MHz)",
|
|
RadioSettingValueInteger(1, 1000,
|
|
uhf_limit.upper))
|
|
other.append(rs)
|
|
rs = RadioSetting("%s.uhf.enable" % limit, "UHF TX Enabled",
|
|
RadioSettingValueBoolean(uhf_limit.enable))
|
|
other.append(rs)
|
|
|
|
if self.MODEL != "UV-6":
|
|
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
|
|
group.append(workmode)
|
|
|
|
rs = RadioSetting("displayab", "Display",
|
|
RadioSettingValueList(
|
|
AB_LIST, AB_LIST[_settings.displayab]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("workmode", "VFO/MR Mode",
|
|
RadioSettingValueList(
|
|
WORKMODE_LIST,
|
|
WORKMODE_LIST[_settings.workmode]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("keylock", "Keypad Lock",
|
|
RadioSettingValueBoolean(_settings.keylock))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
|
|
RadioSettingValueInteger(0, 127,
|
|
_wmchannel.mrcha))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
|
|
RadioSettingValueInteger(0, 127,
|
|
_wmchannel.mrchb))
|
|
workmode.append(rs)
|
|
|
|
def convert_bytes_to_freq(bytes):
|
|
real_freq = 0
|
|
for byte in bytes:
|
|
real_freq = (real_freq * 10) + byte
|
|
return chirp_common.format_freq(real_freq * 10)
|
|
|
|
def my_validate(value):
|
|
value = chirp_common.parse_freq(value)
|
|
if 17400000 <= value and value < 40000000:
|
|
msg = ("Can't be between 174.00000-400.00000")
|
|
raise InvalidValueError(msg)
|
|
return chirp_common.format_freq(value)
|
|
|
|
def apply_freq(setting, obj):
|
|
value = chirp_common.parse_freq(str(setting.value)) / 10
|
|
obj.band = value >= 40000000
|
|
for i in range(7, -1, -1):
|
|
obj.freq[i] = value % 10
|
|
value /= 10
|
|
|
|
val1a = RadioSettingValueString(0, 10,
|
|
convert_bytes_to_freq(_vfoa.freq))
|
|
val1a.set_validate_callback(my_validate)
|
|
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
|
|
rs.set_apply_callback(apply_freq, _vfoa)
|
|
workmode.append(rs)
|
|
|
|
val1b = RadioSettingValueString(0, 10,
|
|
convert_bytes_to_freq(_vfob.freq))
|
|
val1b.set_validate_callback(my_validate)
|
|
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
|
|
rs.set_apply_callback(apply_freq, _vfob)
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("vfoa.sftd", "VFO A Shift",
|
|
RadioSettingValueList(
|
|
SHIFTD_LIST, SHIFTD_LIST[_vfoa.sftd]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("vfob.sftd", "VFO B Shift",
|
|
RadioSettingValueList(
|
|
SHIFTD_LIST, SHIFTD_LIST[_vfob.sftd]))
|
|
workmode.append(rs)
|
|
|
|
def convert_bytes_to_offset(bytes):
|
|
real_offset = 0
|
|
for byte in bytes:
|
|
real_offset = (real_offset * 10) + byte
|
|
return chirp_common.format_freq(real_offset * 1000)
|
|
|
|
def apply_offset(setting, obj):
|
|
value = chirp_common.parse_freq(str(setting.value)) / 1000
|
|
for i in range(5, -1, -1):
|
|
obj.offset[i] = value % 10
|
|
value /= 10
|
|
|
|
val1a = RadioSettingValueString(
|
|
0, 10, convert_bytes_to_offset(_vfoa.offset))
|
|
rs = RadioSetting("vfoa.offset",
|
|
"VFO A Offset (0.0-999.999)", val1a)
|
|
rs.set_apply_callback(apply_offset, _vfoa)
|
|
workmode.append(rs)
|
|
|
|
val1b = RadioSettingValueString(
|
|
0, 10, convert_bytes_to_offset(_vfob.offset))
|
|
rs = RadioSetting("vfob.offset",
|
|
"VFO B Offset (0.0-999.999)", val1b)
|
|
rs.set_apply_callback(apply_offset, _vfob)
|
|
workmode.append(rs)
|
|
|
|
if self._tri_power:
|
|
if _vfoa.txpower3 > 0x02:
|
|
val = 0x00
|
|
else:
|
|
val = _vfoa.txpower3
|
|
rs = RadioSetting("vfoa.txpower3", "VFO A Power",
|
|
RadioSettingValueList(
|
|
TXPOWER3_LIST,
|
|
TXPOWER3_LIST[val]))
|
|
workmode.append(rs)
|
|
|
|
if _vfob.txpower3 > 0x02:
|
|
val = 0x00
|
|
else:
|
|
val = _vfob.txpower3
|
|
rs = RadioSetting("vfob.txpower3", "VFO B Power",
|
|
RadioSettingValueList(
|
|
TXPOWER3_LIST,
|
|
TXPOWER3_LIST[val]))
|
|
workmode.append(rs)
|
|
else:
|
|
rs = RadioSetting("vfoa.txpower", "VFO A Power",
|
|
RadioSettingValueList(
|
|
TXPOWER_LIST,
|
|
TXPOWER_LIST[_vfoa.txpower]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("vfob.txpower", "VFO B Power",
|
|
RadioSettingValueList(
|
|
TXPOWER_LIST,
|
|
TXPOWER_LIST[_vfob.txpower]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("vfoa.widenarr", "VFO A Bandwidth",
|
|
RadioSettingValueList(
|
|
BANDWIDTH_LIST,
|
|
BANDWIDTH_LIST[_vfoa.widenarr]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("vfob.widenarr", "VFO B Bandwidth",
|
|
RadioSettingValueList(
|
|
BANDWIDTH_LIST,
|
|
BANDWIDTH_LIST[_vfob.widenarr]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("vfoa.scode", "VFO A PTT-ID",
|
|
RadioSettingValueList(
|
|
PTTIDCODE_LIST, PTTIDCODE_LIST[_vfoa.scode]))
|
|
workmode.append(rs)
|
|
|
|
rs = RadioSetting("vfob.scode", "VFO B PTT-ID",
|
|
RadioSettingValueList(
|
|
PTTIDCODE_LIST, PTTIDCODE_LIST[_vfob.scode]))
|
|
workmode.append(rs)
|
|
|
|
if not self._is_orig():
|
|
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
|
|
RadioSettingValueList(
|
|
STEP291_LIST, STEP291_LIST[_vfoa.step]))
|
|
workmode.append(rs)
|
|
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
|
|
RadioSettingValueList(
|
|
STEP291_LIST, STEP291_LIST[_vfob.step]))
|
|
workmode.append(rs)
|
|
else:
|
|
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
|
|
RadioSettingValueList(
|
|
STEP_LIST, STEP_LIST[_vfoa.step]))
|
|
workmode.append(rs)
|
|
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
|
|
RadioSettingValueList(
|
|
STEP_LIST, STEP_LIST[_vfob.step]))
|
|
workmode.append(rs)
|
|
|
|
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Preset")
|
|
group.append(fm_preset)
|
|
|
|
if _fm_presets <= 108.0 * 10 - 650:
|
|
preset = _fm_presets / 10.0 + 65
|
|
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
|
|
preset = _fm_presets / 10.0
|
|
else:
|
|
preset = 76.0
|
|
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
|
|
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
|
|
fm_preset.append(rs)
|
|
|
|
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
|
|
group.append(dtmf)
|
|
|
|
if str(self._memobj.firmware_msg.line1) == "HN5RV01":
|
|
dtmfchars = "0123456789ABCD*#"
|
|
else:
|
|
dtmfchars = "0123456789 *#ABCD"
|
|
|
|
for i in range(0, 15):
|
|
_codeobj = self._memobj.pttid[i].code
|
|
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
|
|
val = RadioSettingValueString(0, 5, _code, False)
|
|
val.set_charset(dtmfchars)
|
|
rs = RadioSetting("pttid/%i.code" % i,
|
|
"PTT ID Code %i" % (i + 1), val)
|
|
|
|
def apply_code(setting, obj):
|
|
code = []
|
|
for j in range(0, 5):
|
|
try:
|
|
code.append(dtmfchars.index(str(setting.value)[j]))
|
|
except IndexError:
|
|
code.append(0xFF)
|
|
obj.code = code
|
|
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
|
|
dtmf.append(rs)
|
|
|
|
dtmfcharsani = "0123456789"
|
|
|
|
_codeobj = self._memobj.ani.code
|
|
_code = "".join([dtmfcharsani[x] for x in _codeobj if int(x) < 0x1F])
|
|
val = RadioSettingValueString(0, 5, _code, False)
|
|
val.set_charset(dtmfcharsani)
|
|
rs = RadioSetting("ani.code", "ANI Code", val)
|
|
|
|
def apply_code(setting, obj):
|
|
code = []
|
|
for j in range(0, 5):
|
|
try:
|
|
code.append(dtmfchars.index(str(setting.value)[j]))
|
|
except IndexError:
|
|
code.append(0xFF)
|
|
obj.code = code
|
|
rs.set_apply_callback(apply_code, _ani)
|
|
dtmf.append(rs)
|
|
|
|
rs = RadioSetting("ani.aniid", "ANI ID",
|
|
RadioSettingValueList(PTTID_LIST,
|
|
PTTID_LIST[_ani.aniid]))
|
|
dtmf.append(rs)
|
|
|
|
_codeobj = self._memobj.ani.alarmcode
|
|
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
|
|
val = RadioSettingValueString(0, 3, _code, False)
|
|
val.set_charset(dtmfchars)
|
|
rs = RadioSetting("ani.alarmcode", "Alarm Code", val)
|
|
|
|
def apply_code(setting, obj):
|
|
alarmcode = []
|
|
for j in range(0, 3):
|
|
try:
|
|
alarmcode.append(dtmfchars.index(str(setting.value)[j]))
|
|
except IndexError:
|
|
alarmcode.append(0xFF)
|
|
obj.alarmcode = alarmcode
|
|
rs.set_apply_callback(apply_code, _ani)
|
|
dtmf.append(rs)
|
|
|
|
rs = RadioSetting("dtmfst", "DTMF Sidetone",
|
|
RadioSettingValueList(DTMFST_LIST,
|
|
DTMFST_LIST[_settings.dtmfst]))
|
|
dtmf.append(rs)
|
|
|
|
if _ani.dtmfon > 0xC3:
|
|
val = 0x00
|
|
else:
|
|
val = _ani.dtmfon
|
|
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
|
|
RadioSettingValueList(DTMFSPEED_LIST,
|
|
DTMFSPEED_LIST[val]))
|
|
dtmf.append(rs)
|
|
|
|
if _ani.dtmfoff > 0xC3:
|
|
val = 0x00
|
|
else:
|
|
val = _ani.dtmfoff
|
|
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
|
|
RadioSettingValueList(DTMFSPEED_LIST,
|
|
DTMFSPEED_LIST[val]))
|
|
dtmf.append(rs)
|
|
|
|
rs = RadioSetting("pttlt", "PTT ID Delay",
|
|
RadioSettingValueInteger(0, 50, _settings.pttlt))
|
|
dtmf.append(rs)
|
|
|
|
if not self._is_orig() and self._aux_block:
|
|
service = RadioSettingGroup("service", "Service Settings")
|
|
group.append(service)
|
|
|
|
for band in ["vhf", "uhf"]:
|
|
for index in range(0, 10):
|
|
key = "squelch_new.%s.sql%i" % (band, index)
|
|
if band == "vhf":
|
|
_obj = self._memobj.squelch_new.vhf
|
|
elif band == "uhf":
|
|
_obj = self._memobj.squelch_new.uhf
|
|
name = "%s Squelch %i" % (band.upper(), index)
|
|
rs = RadioSetting(key, name,
|
|
RadioSettingValueInteger(
|
|
0, 123,
|
|
getattr(_obj, "sql%i" % (index))))
|
|
service.append(rs)
|
|
|
|
return group
|
|
|
|
def get_settings(self):
|
|
try:
|
|
return self._get_settings()
|
|
except:
|
|
import traceback
|
|
LOG.error("Failed to parse settings: %s", traceback.format_exc())
|
|
return None
|
|
|
|
def set_settings(self, settings):
|
|
_settings = self._memobj.settings
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
if element.get_name() == "fm_preset":
|
|
self._set_fm_preset(element)
|
|
else:
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
name = element.get_name()
|
|
if "." in name:
|
|
bits = name.split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
if "/" in bit:
|
|
bit, index = bit.split("/", 1)
|
|
index = int(index)
|
|
obj = getattr(obj, bit)[index]
|
|
else:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = _settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug("Using apply callback")
|
|
element.run_apply_callback()
|
|
elif element.value.get_mutable():
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception, e:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
def _set_fm_preset(self, settings):
|
|
for element in settings:
|
|
try:
|
|
val = element.value
|
|
if self._memobj.fm_presets <= 108.0 * 10 - 650:
|
|
value = int(val.get_value() * 10 - 650)
|
|
else:
|
|
value = int(val.get_value() * 10)
|
|
LOG.debug("Setting fm_presets = %s" % (value))
|
|
self._memobj.fm_presets = value
|
|
except Exception, e:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
|
|
class UV5XAlias(chirp_common.Alias):
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-5X"
|
|
|
|
|
|
class RT5RAlias(chirp_common.Alias):
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT5R"
|
|
|
|
|
|
class RT5RVAlias(chirp_common.Alias):
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT5RV"
|
|
|
|
|
|
class RT5Alias(chirp_common.Alias):
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT5"
|
|
|
|
|
|
class RT5_TPAlias(chirp_common.Alias):
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT5(tri-power)"
|
|
|
|
|
|
class RH5RAlias(chirp_common.Alias):
|
|
VENDOR = "Rugged"
|
|
MODEL = "RH5R"
|
|
|
|
|
|
class ROUV5REXAlias(chirp_common.Alias):
|
|
VENDOR = "Radioddity"
|
|
MODEL = "UV-5R EX"
|
|
|
|
|
|
class A5RAlias(chirp_common.Alias):
|
|
VENDOR = "Ansoko"
|
|
MODEL = "A-5R"
|
|
|
|
|
|
@directory.register
|
|
class BaofengUV5RGeneric(BaofengUV5R):
|
|
ALIASES = [UV5XAlias, RT5RAlias, RT5RVAlias, RT5Alias, RH5RAlias,
|
|
ROUV5REXAlias, A5RAlias]
|
|
|
|
|
|
@directory.register
|
|
class BaofengF11Radio(BaofengUV5R):
|
|
VENDOR = "Baofeng"
|
|
MODEL = "F-11"
|
|
_basetype = BASETYPE_F11
|
|
_idents = [UV5R_MODEL_F11]
|
|
|
|
def _is_orig(self):
|
|
# Override this for F11 to always return False
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class BaofengUV82Radio(BaofengUV5R):
|
|
MODEL = "UV-82"
|
|
_basetype = BASETYPE_UV82
|
|
_idents = [UV5R_MODEL_UV82]
|
|
_vhf_range = (130000000, 176000000)
|
|
_uhf_range = (400000000, 521000000)
|
|
_valid_chars = chirp_common.CHARSET_ASCII
|
|
|
|
def _is_orig(self):
|
|
# Override this for UV82 to always return False
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class Radioddity82X3Radio(BaofengUV82Radio):
|
|
VENDOR = "Radioddity"
|
|
MODEL = "UV-82X3"
|
|
_basetype = BASETYPE_UV82X3
|
|
|
|
def get_features(self):
|
|
rf = BaofengUV5R.get_features(self)
|
|
rf.valid_bands = [self._vhf_range,
|
|
(200000000, 260000000),
|
|
self._uhf_range]
|
|
return rf
|
|
|
|
|
|
@directory.register
|
|
class BaofengUV6Radio(BaofengUV5R):
|
|
|
|
"""Baofeng UV-6/UV-7"""
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-6"
|
|
_basetype = BASETYPE_UV6
|
|
_idents = [UV5R_MODEL_UV6,
|
|
UV5R_MODEL_UV6_ORIG
|
|
]
|
|
_aux_block = False
|
|
|
|
def get_features(self):
|
|
rf = BaofengUV5R.get_features(self)
|
|
rf.memory_bounds = (1, 128)
|
|
return rf
|
|
|
|
def _get_mem(self, number):
|
|
return self._memobj.memory[number - 1]
|
|
|
|
def _get_nam(self, number):
|
|
return self._memobj.names[number - 1]
|
|
|
|
def _set_mem(self, number):
|
|
return self._memobj.memory[number - 1]
|
|
|
|
def _set_nam(self, number):
|
|
return self._memobj.names[number - 1]
|
|
|
|
def _is_orig(self):
|
|
# Override this for UV6 to always return False
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class IntekKT980Radio(BaofengUV5R):
|
|
VENDOR = "Intek"
|
|
MODEL = "KT-980HP"
|
|
_basetype = BASETYPE_KT980HP
|
|
_idents = [UV5R_MODEL_291]
|
|
_vhf_range = (130000000, 180000000)
|
|
_uhf_range = (400000000, 521000000)
|
|
_tri_power = True
|
|
|
|
def get_features(self):
|
|
rf = BaofengUV5R.get_features(self)
|
|
rf.valid_power_levels = UV5R_POWER_LEVELS3
|
|
return rf
|
|
|
|
def _is_orig(self):
|
|
# Override this for KT980HP to always return False
|
|
return False
|
|
|
|
|
|
class ROGA5SAlias(chirp_common.Alias):
|
|
VENDOR = "Radioddity"
|
|
MODEL = "GA-5S"
|
|
|
|
|
|
class UV5XPAlias(chirp_common.Alias):
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-5XP"
|
|
|
|
|
|
class TSTIF8Alias(chirp_common.Alias):
|
|
VENDOR = "TechSide"
|
|
MODEL = "TI-F8+"
|
|
|
|
|
|
class TenwayUV5RPro(chirp_common.Alias):
|
|
VENDOR = 'Tenway'
|
|
MODEL = 'UV-5R Pro'
|
|
|
|
|
|
class TSTST9Alias(chirp_common.Alias):
|
|
VENDOR = "TechSide"
|
|
MODEL = "TS-T9+"
|
|
|
|
|
|
class TDUV5RRadio(chirp_common.Alias):
|
|
VENDOR = "TIDRADIO"
|
|
MODEL = "TD-UV5R TriPower"
|
|
|
|
|
|
@directory.register
|
|
class BaofengBFF8HPRadio(BaofengUV5R):
|
|
VENDOR = "Baofeng"
|
|
MODEL = "BF-F8HP"
|
|
ALIASES = [RT5_TPAlias, ROGA5SAlias, UV5XPAlias, TSTIF8Alias,
|
|
TenwayUV5RPro, TSTST9Alias, TDUV5RRadio]
|
|
_basetype = BASETYPE_F8HP
|
|
_idents = [UV5R_MODEL_291,
|
|
UV5R_MODEL_A58
|
|
]
|
|
_vhf_range = (130000000, 180000000)
|
|
_uhf_range = (400000000, 521000000)
|
|
_tri_power = True
|
|
|
|
def get_features(self):
|
|
rf = BaofengUV5R.get_features(self)
|
|
rf.valid_power_levels = UV5R_POWER_LEVELS3
|
|
return rf
|
|
|
|
def _is_orig(self):
|
|
# Override this for BFF8HP to always return False
|
|
return False
|
|
|
|
|
|
class TenwayUV82Pro(chirp_common.Alias):
|
|
VENDOR = 'Tenway'
|
|
MODEL = 'UV-82 Pro'
|
|
|
|
|
|
@directory.register
|
|
class BaofengUV82HPRadio(BaofengUV5R):
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-82HP"
|
|
ALIASES = [TenwayUV82Pro]
|
|
_basetype = BASETYPE_UV82HP
|
|
_idents = [UV5R_MODEL_UV82]
|
|
_vhf_range = (136000000, 175000000)
|
|
_uhf_range = (400000000, 521000000)
|
|
_tri_power = True
|
|
|
|
def get_features(self):
|
|
rf = BaofengUV5R.get_features(self)
|
|
rf.valid_power_levels = UV5R_POWER_LEVELS3
|
|
return rf
|
|
|
|
def _is_orig(self):
|
|
# Override this for UV82HP to always return False
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class RadioddityUV5RX3Radio(BaofengUV5R):
|
|
VENDOR = "Radioddity"
|
|
MODEL = "UV-5RX3"
|
|
|
|
def get_features(self):
|
|
rf = BaofengUV5R.get_features(self)
|
|
rf.valid_bands = [self._vhf_range,
|
|
(200000000, 260000000),
|
|
self._uhf_range]
|
|
return rf
|
|
|
|
@classmethod
|
|
def match_model(cls, filename, filedata):
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class RadioddityGT5RRadio(BaofengUV5R):
|
|
VENDOR = 'Baofeng'
|
|
MODEL = 'GT-5R'
|
|
|
|
vhftx = [144000000, 148000000]
|
|
uhftx = [420000000, 450000000]
|
|
|
|
def set_memory(self, mem):
|
|
# If memory is outside the TX limits, the radio will refuse
|
|
# transmit. Radioddity asked for us to enforce this behavior
|
|
# in chirp for consistency.
|
|
if not (mem.freq >= self.vhftx[0] and mem.freq < self.vhftx[1]) and \
|
|
not (mem.freq >= self.uhftx[0] and mem.freq < self.uhftx[1]):
|
|
LOG.info('Memory frequency outside TX limits of radio; '
|
|
'forcing duplex=off')
|
|
mem.duplex = 'off'
|
|
mem.offset = 0
|
|
BaofengUV5R.set_memory(self, mem)
|
|
|
|
@classmethod
|
|
def match_model(cls, filename, filedata):
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class RadioddityUV5GRadio(BaofengUV5R):
|
|
VENDOR = 'Radioddity'
|
|
MODEL = 'UV-5G'
|
|
|
|
_basetype = BASETYPE_UV5R
|
|
_idents = [UV5R_MODEL_UV5G]
|
|
_gmrs = True
|
|
|
|
@classmethod
|
|
def match_model(cls, filename, filedata):
|
|
return False
|