|
# Copyright 2021 Jim Unroe <rock.unroe@gmail.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import struct
|
|
import logging
|
|
|
|
from chirp import bitwise
|
|
from chirp import chirp_common
|
|
from chirp import directory
|
|
from chirp import errors
|
|
from chirp import memmap
|
|
from chirp import util
|
|
from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \
|
|
RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \
|
|
RadioSettingValueInteger
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
#
|
|
# Chirp Driver for Retevis RT98 models: RT98V (136-174 MHz)
|
|
# RT98U (400-490 MHz)
|
|
# RT98W (66-88 MHz)
|
|
#
|
|
#
|
|
#
|
|
# Global Parameters
|
|
#
|
|
TONES = [62.5] + list(chirp_common.TONES)
|
|
TMODES = ['', 'Tone', 'DTCS']
|
|
DUPLEXES = ['', '+', '-']
|
|
|
|
TXPOWER_LOW = 0x00
|
|
TXPOWER_MED = 0x01
|
|
TXPOWER_HIGH = 0x02
|
|
|
|
DUPLEX_NOSPLIT = 0x00
|
|
DUPLEX_POSSPLIT = 0x01
|
|
DUPLEX_NEGSPLIT = 0x02
|
|
|
|
CHANNEL_WIDTH_12d5kHz = 0x00
|
|
CHANNEL_WIDTH_20kHz = 0x01
|
|
CHANNEL_WIDTH_25kHz = 0x02
|
|
|
|
TUNING_STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 20.0, 25.0, 30.0, 50.0]
|
|
|
|
POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=5),
|
|
chirp_common.PowerLevel("Mid", watts=10),
|
|
chirp_common.PowerLevel("High", watts=15)]
|
|
|
|
PMR_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=0.5), ]
|
|
|
|
FREENET_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1), ]
|
|
|
|
PMR_FREQS = [446006250, 446018750, 446031250, 446043750,
|
|
446056250, 446068750, 446081250, 446093750,
|
|
446106250, 446118750, 446131250, 446143750,
|
|
446156250, 446168750, 446181250, 446193750]
|
|
|
|
FREENET_FREQS = [149025000, 149037500, 149050000,
|
|
149087500, 149100000, 149112500]
|
|
|
|
CROSS_MODES = ["Tone->Tone", "DTCS->", "->DTCS", "Tone->DTCS", "DTCS->Tone",
|
|
"->Tone", "DTCS->DTCS"]
|
|
|
|
LIST_STEP = [str(x) for x in TUNING_STEPS]
|
|
LIST_TIMEOUT = ["Off"] + ["%s min" % x for x in range(1, 31)]
|
|
LIST_APO = ["Off", "30 min", "1 hr", "2 hrs"]
|
|
LIST_SQUELCH = ["Off"] + ["Level %s" % x for x in range(1, 10)]
|
|
LIST_DISPLAY_MODE = ["Channel", "Frequency", "Name"]
|
|
LIST_AOP = ["Manual", "Auto"]
|
|
LIST_STE_TYPE = ["Off", "Silent", "120 Degree", "180 Degree", "240 Degree"]
|
|
LIST_STE_FREQ = ["Off", "55.2 Hz", "259.2 Hz"]
|
|
LIST_VFOMR = ["MR", "VFO"]
|
|
LIST_SCAN = ["TO", "CO", "SE"]
|
|
|
|
LIST_PRIORITY_CH = ["Off", "Priority Channel 1", "Priority Channel 2",
|
|
"Priority Channel 1 + Priority Channel 2"]
|
|
|
|
LIST_REVERT_CH = ["Selected", "Selected + TalkBack", "Priority Channel 1",
|
|
"Priority Channel 2", "Last Called", "Last Used",
|
|
"Priority Channel 1 + TalkBack",
|
|
"Priority Channel 2 + TalkBack"]
|
|
|
|
LIST_TIME50 = ["0.1", "0.2", "0.3", "0.4", "0.5",
|
|
"0.6", "0.7", "0.8", "0.9", "1.0",
|
|
"1.1", "1.2", "1.3", "1.4", "1.5",
|
|
"1.6", "1.7", "1.8", "1.9", "2.0",
|
|
"2.1", "3.2", "2.3", "2.4", "2.5",
|
|
"2.6", "2.7", "2.8", "2.9", "3.0",
|
|
"3.1", "3.2", "3.3", "3.4", "3.5",
|
|
"3.6", "3.7", "3.8", "3.9", "4.0",
|
|
"4.1", "4.2", "4.3", "4.4", "4.5",
|
|
"4.6", "4.7", "4.8", "4.9", "5.0"]
|
|
LIST_TIME46 = LIST_TIME50[4:]
|
|
|
|
LIST_RT98V_MODES = ["FreeNet", "COM", "COMII"]
|
|
LIST_RT98U_MODES = ["PMR", "COM", "COMII"]
|
|
LIST_RT98W_MODES = ["", "", "", "", "", "", "COM"]
|
|
|
|
LIST_RT98V_FREQS = ["Rx(149 - 149.2 MHz) Tx(149 - 149.2 MHz)",
|
|
"Rx(136 - 174 MHz) Tx(136 - 174 MHz)",
|
|
"Rx(147 - 174 MHz) Tx(147 - 174 MHz)"]
|
|
|
|
LIST_RT98U_FREQS = ["Rx(446 - 446.2 MHz) Tx(446 - 446.2 MHz)",
|
|
"Rx(400 - 470 MHz) Tx(400 - 470 MHz)",
|
|
"Rx(450 - 470 MHz) Tx(450 - 470 MHz)"]
|
|
|
|
LIST_RT98W_FREQS = ["",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"Rx(66 - 88 MHz) Tx(66 - 88 MHz)"]
|
|
|
|
# RT98 memory map
|
|
# section: 1 Channel Bank
|
|
# description of channel bank (199 channels , range 1-199)
|
|
# Each 32 Byte (0x20 hex) record:
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 4 bbcd freq[4] receive frequency in packed binary coded
|
|
# decimal
|
|
# 4 bbcd offset[4] transceive offset in packed binary coded
|
|
# decimal (note: +/- direction set by
|
|
# 'duplex' field)
|
|
# 1 u8 unknown0
|
|
# 1 u8
|
|
# :1 reverse:1 reverse flag, 0=off, 1=on (reverses
|
|
# transmit and receive frequencies)
|
|
# :1 txoff:1 transmitt off flag, 0=transmit, 1=do not
|
|
# transmit
|
|
# :2 power:2 transmit power setting, value range 0-2,
|
|
# 0=low, 1=middle, 2=high
|
|
# :2 duplex:2 duplex settings, 0=simplex, 1=plus (+)
|
|
# offset, 2=minus(-) offset (see offset field)
|
|
# :2 channel_width:2 channel spacing, 0=12.5kHz, 1=20kHz, 2=25kHz
|
|
# 1 u8
|
|
# :2 unknown1:2
|
|
# :1 talkaround:1 talkaround flag, 0=off, 1=on
|
|
# (bypasses repeater)
|
|
# :1 squelch_mode:1 squelch mode flag, 0=carrier, 1=ctcss/dcs
|
|
# :1 rxdcsextra:1 use with rxcode for index of rx DCS to use
|
|
# :1 rxinv:1 inverse DCS rx polarity flag, 0=N, 1=I
|
|
# :1 txdcsextra:1 use with txcode for index of tx DCS to use
|
|
# :1 txinv:1 inverse DCS tx polarity flag, 0=N, 1=I
|
|
# 1 u8
|
|
# :4 unknown2:4
|
|
# :2 rxtmode:2 rx tone mode, value range 0-2, 0=none,
|
|
# 1=CTCSS, 2=DCS (ctcss tone in field rxtone)
|
|
# :2 txtmode:2 tx tone mode, value range 0-2, 0=none,
|
|
# 1=CTCSS, 3=DCS (ctcss tone in field txtone)
|
|
# 1 u8
|
|
# :2 unknown3:2
|
|
# :6 txtone:6 tx ctcss tone, menu index
|
|
# 1 u8
|
|
# :2 unknown4:2
|
|
# :6 rxtone:6 rx ctcss tone, menu index
|
|
# 1 u8 txcode ?, not used for ctcss
|
|
# 1 u8 rxcode ?, not used for ctcss
|
|
# 1 u8
|
|
# :6 unknown5:6
|
|
# :1 busychannellockout:1 busy channel lockout flag, 0=off, 1=enabled
|
|
# :1 unknown6:1
|
|
# 6 char name[6] 6 byte char string for channel name
|
|
# 9 u8 unknown7[9]
|
|
#
|
|
MEM_FORMAT = """
|
|
// #seekto 0x0000;
|
|
struct {
|
|
bbcd freq[4];
|
|
bbcd offset[4];
|
|
u8 unknown0;
|
|
u8 reverse:1,
|
|
tx_off:1,
|
|
txpower:2,
|
|
duplex:2,
|
|
channel_width:2;
|
|
u8 unknown1:2,
|
|
talkaround:1,
|
|
squelch_mode:1,
|
|
rxdcsextra:1,
|
|
rxinv:1,
|
|
txdcsextra:1,
|
|
txinv:1;
|
|
u8 unknown2:4,
|
|
rxtmode:2,
|
|
txtmode:2;
|
|
u8 unknown3:2,
|
|
txtone:6;
|
|
u8 unknown4:2,
|
|
rxtone:6;
|
|
u8 txcode;
|
|
u8 rxcode;
|
|
u8 unknown5:6,
|
|
busychannellockout:1,
|
|
unknown6:1;
|
|
char name[6];
|
|
u8 unknown7[9];
|
|
} memory[199];
|
|
"""
|
|
|
|
# RT98 memory map
|
|
# section: 2 and 3 Channel Set/Skip Flags
|
|
#
|
|
# Channel Set (starts 0x3240) : Channel Set bit is value 0 if a memory
|
|
# location in the channel bank is active.
|
|
# Channel Skip (starts 0x3260): Channel Skip bit is value 0 if a memory
|
|
# location in the channel bank is active.
|
|
#
|
|
# Both flag maps are a total 24 bytes in length, aligned on 32 byte records.
|
|
# bit = 0 channel not set/skip, 1 is channel set/no skip
|
|
#
|
|
# to index a channel:
|
|
# cbyte = channel / 8 ;
|
|
# cbit = channel % 8 ;
|
|
# setflag = csetflag[cbyte].c[cbit] ;
|
|
# skipflag = cskipflag[cbyte].c[cbit] ;
|
|
#
|
|
# channel range is 1-199, range is 32 bytes (last 7 unknown)
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x3240;
|
|
struct {
|
|
bit c[8];
|
|
} csetflag[32];
|
|
|
|
// #seekto 0x3260;
|
|
struct {
|
|
bit c[8];
|
|
} cskipflag[32];
|
|
|
|
"""
|
|
|
|
# RT98 memory map
|
|
# section: 4 Startup Label
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 6 char start_label[6] label displayed at startup (usually
|
|
# your call sign)
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x3300;
|
|
struct {
|
|
char startname[6];
|
|
} slabel;
|
|
"""
|
|
|
|
# RT98 memory map
|
|
# section: 5, 6 and 7 Radio Options
|
|
# used to set a number of radio options
|
|
#
|
|
# description of function setup options, starting at 0x3310 (settings3)
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 1 u8
|
|
# :6 unknown:6
|
|
# :2 bandlimit_3310:2 frequency ranges, range 0-2,
|
|
# 0=freenet(vhf) or pmr(uhf), 1=com, 2=comii
|
|
# rt98v - 00 FreeNet Rx(149 - 149.2 MHz) Tx(149 - 149.2 MHz)
|
|
# 01 COM Rx(136 - 174 MHz) Tx(136 - 174 MHz)
|
|
# 02 COMII Rx(147 - 174 MHz) Tx(147 - 174 MHz)
|
|
# rt98u - 00 PMR Rx(446 - 446.2 MHz) Tx(446 - 446.2 MHz)
|
|
# 01 COM Rx(400 - 470 MHz) Tx(400 - 470 MHz)
|
|
# 02 COMII Rx(450 - 470 MHz) Tx(450 - 470 MHz)
|
|
# 1 u8 ch_number; channel number, range 1-199
|
|
# 1 u8
|
|
# :7 unknown_3312:7
|
|
# :1 vfomr:1 vfo/mr mode, range 0-1, 0=mr, 1=vfo
|
|
# only S/N:1907***********
|
|
#
|
|
# description of function setup options, starting at 0x3340 (settings)
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 1 u8
|
|
# :4 unknown_3340:4
|
|
# :4 tuning_step:4 tuning step, menu index value from 0-8
|
|
# 2.5, 5, 6.25, 10, 12.5, 20, 25, 30, 50
|
|
# 1 u8
|
|
# :7 unknown_3341:7
|
|
# :1 beep:1 beep mode, range 0-1, 0=off, 1=on
|
|
# 1 u8
|
|
# :3 unknown_3342:3
|
|
# :5 timeout_timer:5 timeout timer, range off (no timeout),
|
|
# 1-30 minutes
|
|
# 1 u8
|
|
# :6 unknown_3343:6
|
|
# :2 auto_power_off:2 auto power off, range 0-3, off, 30min,
|
|
# 1hr, 2hr
|
|
# 1 u8
|
|
# :4 unknown_3344:4
|
|
# :4 squelch:4 squelch level, range off, 1-9
|
|
# 1 u8
|
|
# :3 unknown_3345:3
|
|
# :5 volume:5 volume level, range 1-30 (no zero)
|
|
# 1 u8
|
|
# :6 unknown_3346:6
|
|
# :2 scan_revive:2 scan revive method, range 0-2, 0=to,
|
|
# 1=co, 2=se
|
|
# only S/N:1907***********
|
|
# 1 u8 unknown_3347
|
|
# 1 u8 0x3348 [12]
|
|
# :6 unknown_3348:6
|
|
# :2 display_mode display mode, range 0-2, 0=channel,
|
|
# 1=frequency, 2=name
|
|
# 1 u8
|
|
# :7 unknown_3349:7
|
|
# :1 auto_power_on:1 auto power on, range 0-1, 0=manual,
|
|
# 1=auto
|
|
# 1 u8
|
|
# :3 unknown_334A:3
|
|
# :5 mic_gain:5 mic gain, range 1-30 (no zero)
|
|
# 1 u8
|
|
# :5 unknown_334C:5
|
|
# :3 ste_type:3 ste type, range 0-4, 0=off, 1=silent,
|
|
# 2=120degree, 3=180degree, 4=240degree
|
|
# 1 u8
|
|
# :7 unknown_334D:7
|
|
# :1 ste_frequency:1 ste frequency, range 0-2, 0=off,
|
|
# 1=55.2Hz, 2=259.2Hz
|
|
# 1 u8
|
|
# :2 unknown_0x334E:2
|
|
# :1 forbid_setting:1 forbid setting(optional function),
|
|
# range 0-1, 0=disabled, 1=enabled
|
|
# :1 forbid_initialize:1 forbid initialize operate, range 0-1,
|
|
# 0=enabled, 1=disabled (inverted)
|
|
# :1 save_chan_param:1 save channel parameters, range 0-1,
|
|
# 0=disabled, 1=enabled
|
|
# :1 forbid_chan_menu:1 forbid channel menu, range 0-1,
|
|
# 0=disabled, 1=enabled
|
|
# :1 sql_key_function:1 sql key function, range 0-1,
|
|
# 0=squelch off momentary, 1=squelch off
|
|
# :1 unknown:1
|
|
#
|
|
# description of function setup options, starting at 0x3380 (settings2)
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 1 u8
|
|
# :7 unknown_3380:7
|
|
# :1 scan_mode:1 scan mode, range 0-1, 0=off, 1=on
|
|
# 1 u8
|
|
# :6 unknown_3381:6
|
|
# :2 priority_ch:2 priority channel, range 0-3, 0=off,
|
|
# 1=priority channel 1,
|
|
# 2=priority channel 2,
|
|
# 3=priority channel 1 + priority channel 2
|
|
# 1 u8 priority_ch1 priority channel 1 number, range 1-199
|
|
# 1 u8 priority_ch2 priority channel 2 number, range 1-199
|
|
# 1 u8
|
|
# :4 unknown_3384:4
|
|
# :4 revert_ch:4 revert channel, range 0-3, 0=selected,
|
|
# 1=selected + talkback, 2=last called,
|
|
# 3=last used
|
|
# 1 u8 look_back_time_a look back time a, range 0-45
|
|
# 1 u8 look_back_time_b look back time b, range 0-45
|
|
# 1 u8 dropout_delay_time dropout delay time, range 0-49
|
|
# 1 u8 dwell_time dwell time, range 0-49
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x3310;
|
|
struct {
|
|
u8 bandlimit;
|
|
u8 ch_number;
|
|
u8 unknown_3312:7,
|
|
vfomr:1;
|
|
} settings3;
|
|
"""
|
|
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x3340;
|
|
struct {
|
|
u8 unknown_3340:4,
|
|
tuning_step:4;
|
|
u8 unknown_3341:7,
|
|
beep:1;
|
|
u8 unknown_3342:3,
|
|
timeout_timer:5;
|
|
u8 unknown_3343:6,
|
|
auto_power_off:2;
|
|
u8 unknown_3344:4,
|
|
squelch:4;
|
|
u8 unknown_3345:3,
|
|
volume:5;
|
|
u8 unknown_3346:6,
|
|
scan_resume:2;
|
|
u8 unknown_3347;
|
|
u8 unknown_3348:6,
|
|
display_mode:2;
|
|
u8 unknown_3349:7,
|
|
auto_power_on:1;
|
|
u8 unknown_334A:3,
|
|
mic_gain:5;
|
|
u8 unknown_334B;
|
|
u8 unknown_334C:5,
|
|
ste_type:3;
|
|
u8 unknown_334D:6,
|
|
ste_frequency:2;
|
|
u8 unknown_334E:1,
|
|
forbid_setting:1,
|
|
unknown1:1,
|
|
forbid_initialize:1,
|
|
save_chan_param:1,
|
|
forbid_chan_menu:1,
|
|
sql_key_function:1,
|
|
unknown2:1;
|
|
} settings;
|
|
"""
|
|
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x3380;
|
|
struct {
|
|
u8 unknown_3380:7,
|
|
scan_mode:1;
|
|
u8 unknown_3381:6,
|
|
priority_ch:2;
|
|
u8 priority_ch1;
|
|
u8 priority_ch2;
|
|
u8 unknown_3384:4,
|
|
revert_ch:4;
|
|
u8 look_back_time_a;
|
|
u8 look_back_time_b;
|
|
u8 dropout_delay_time;
|
|
u8 dwell_time;
|
|
} settings2;
|
|
"""
|
|
|
|
# RT98 memory map
|
|
# section: 8 Embedded Messages
|
|
#
|
|
# bytes:bit type description
|
|
# ---------------------------------------------------------------------------
|
|
# 6 char radio_type[5] radio type, vhf=rt98v, uhf=rt98u
|
|
# 2 u8 unknown1[2]
|
|
# 4 char mcu_version[4] mcu version, [x.xx]
|
|
# 2 u8 unknown2[2]
|
|
# 1 u8 mode rt98u mode: 0=pmr, 1=com, 2=comii
|
|
# rt98v mode: 0=freenet, 1=com, 2=comii
|
|
# 1 u8 unknown3
|
|
# 10 u8 unused1[10]
|
|
# 4 u8 unknown4[4]
|
|
# 3 u8 unused2[3]
|
|
# 16 u8 unknown5[16]
|
|
# 10 char date_mfg[16] date manufactured, [yyyy-mm-dd]
|
|
#
|
|
MEM_FORMAT = MEM_FORMAT + """
|
|
#seekto 0x3D00;
|
|
struct {
|
|
char radio_type[7];
|
|
char mcu_version[4];
|
|
u8 unknown2[2];
|
|
u8 mode;
|
|
u8 unknown3;
|
|
u8 unused1[10];
|
|
u8 unknown4[4];
|
|
u8 unused2[3];
|
|
u8 unknown5[16];
|
|
char date_mfg[10];
|
|
} embedded_msg;
|
|
"""
|
|
|
|
|
|
# Format for the version messages returned by the radio
|
|
VER_FORMAT = '''
|
|
u8 hdr;
|
|
char model[7];
|
|
u8 bandlimit;
|
|
char version[6];
|
|
u8 ack;
|
|
'''
|
|
|
|
|
|
# Radio supports upper case and symbols
|
|
CHARSET_ASCII_PLUS = chirp_common.CHARSET_UPPER_NUMERIC + '- '
|
|
|
|
# Band limits as defined by the band byte in ver_response, defined in Hz, for
|
|
# VHF and UHF, used for RX and TX.
|
|
RT98V_BAND_LIMITS = {0x00: [(149000000, 149200000)],
|
|
0x01: [(136000000, 174000000)],
|
|
0x02: [(147000000, 174000000)]}
|
|
|
|
RT98U_BAND_LIMITS = {0x00: [(446000000, 446200000)],
|
|
0x01: [(400000000, 470000000)],
|
|
0x02: [(450000000, 470000000)]}
|
|
|
|
RT98W_BAND_LIMITS = {0x00: [(66000000, 88000000)],
|
|
0x01: [(66000000, 88000000)],
|
|
0x02: [(66000000, 88000000)],
|
|
0x03: [(66000000, 88000000)],
|
|
0x04: [(66000000, 88000000)],
|
|
0x05: [(66000000, 88000000)],
|
|
0x06: [(66000000, 88000000)]}
|
|
|
|
|
|
# Get band limits from a band limit value
|
|
def get_band_limits_Hz(radio_type, limit_value):
|
|
if str(radio_type).rstrip("\00") in ["RT98U", "AT-779U"]:
|
|
if limit_value not in RT98U_BAND_LIMITS:
|
|
limit_value = 0x01
|
|
LOG.warning('Unknown band limit value 0x%02x, default to 0x01')
|
|
bandlimitfrequencies = RT98U_BAND_LIMITS[limit_value]
|
|
elif str(radio_type).rstrip("\00") in ["RT98V", "AT-779V"]:
|
|
if limit_value not in RT98V_BAND_LIMITS:
|
|
limit_value = 0x01
|
|
LOG.warning('Unknown band limit value 0x%02x, default to 0x01')
|
|
bandlimitfrequencies = RT98V_BAND_LIMITS[limit_value]
|
|
elif str(radio_type).rstrip("\00") in ["RT98W", "AT-779W"]:
|
|
if limit_value not in RT98W_BAND_LIMITS:
|
|
limit_value = 0x06
|
|
LOG.warning('Unknown band limit value 0x%02x, default to 0x06')
|
|
bandlimitfrequencies = RT98W_BAND_LIMITS[limit_value]
|
|
return bandlimitfrequencies
|
|
|
|
|
|
def _echo_write(radio, data):
|
|
try:
|
|
radio.pipe.write(data)
|
|
radio.pipe.read(len(data))
|
|
except Exception as e:
|
|
LOG.error("Error writing to radio: %s" % e)
|
|
raise errors.RadioError("Unable to write to radio")
|
|
|
|
|
|
def _checksum(data):
|
|
cs = 0
|
|
for byte in data:
|
|
cs += byte
|
|
return cs % 256
|
|
|
|
|
|
def _read(radio, length):
|
|
try:
|
|
data = radio.pipe.read(length)
|
|
except Exception as e:
|
|
_finish(radio)
|
|
LOG.error("Error reading from radio: %s" % e)
|
|
raise errors.RadioError("Unable to read from radio")
|
|
|
|
if len(data) != length:
|
|
_finish(radio)
|
|
LOG.error("Short read from radio (%i, expected %i)" %
|
|
(len(data), length))
|
|
LOG.debug(util.hexprint(data))
|
|
raise errors.RadioError("Short read from radio")
|
|
return data
|
|
|
|
|
|
# strip trailing 0x00 to convert a string returned by bitwise.parse into a
|
|
# python string
|
|
def cstring_to_py_string(cstring):
|
|
return "".join(c for c in cstring if c != '\x00')
|
|
|
|
|
|
# Check the radio version reported to see if it's one we support,
|
|
# returns bool version supported, and the band index
|
|
def check_ver(ver_response, allowed_types):
|
|
''' Check the returned radio version is one we approve of '''
|
|
|
|
LOG.debug('ver_response = ')
|
|
LOG.debug(util.hexprint(ver_response))
|
|
|
|
resp = bitwise.parse(VER_FORMAT, ver_response)
|
|
verok = False
|
|
|
|
if resp.hdr == 0x49 and resp.ack == 0x06:
|
|
model, version = [cstring_to_py_string(bitwise.get_string(s)).strip()
|
|
for s in (resp.model, resp.version)]
|
|
LOG.debug('radio model: \'%s\' version: \'%s\'' %
|
|
(model, version))
|
|
LOG.debug('allowed_types = %s' % allowed_types)
|
|
|
|
if model in allowed_types:
|
|
LOG.debug('model in allowed_types')
|
|
|
|
if version in allowed_types[model]:
|
|
LOG.debug('version in allowed_types[model]')
|
|
verok = True
|
|
else:
|
|
_finish(radio)
|
|
raise errors.RadioError('Failed to parse version response')
|
|
|
|
return verok, str(resp.model), int(resp.bandlimit)
|
|
|
|
|
|
def _ident(radio):
|
|
radio.pipe.timeout = 1
|
|
_echo_write(radio, b"PROGRAM")
|
|
response = radio.pipe.read(3)
|
|
if response != b"QX\06":
|
|
_finish(radio)
|
|
LOG.debug("Response was :\n%s" % util.hexprint(response))
|
|
raise errors.RadioError("Radio did not respond. Check connection.")
|
|
_echo_write(radio, b"\x02")
|
|
ver_response = radio.pipe.read(16)
|
|
LOG.debug(util.hexprint(ver_response))
|
|
|
|
verok, model, bandlimit = check_ver(ver_response,
|
|
radio.ALLOWED_RADIO_TYPES)
|
|
if not verok:
|
|
_finish(radio)
|
|
raise errors.RadioError(
|
|
'Radio version not in allowed list for %s-%s: %s' %
|
|
(radio.VENDOR, radio.MODEL, util.hexprint(ver_response)))
|
|
|
|
return model, bandlimit
|
|
|
|
|
|
def _send(radio, cmd, addr, length, data=None):
|
|
frame = struct.pack(">cHb", cmd, addr, length)
|
|
if data:
|
|
frame += data
|
|
frame += bytes([_checksum(frame[1:])])
|
|
frame += b"\x06"
|
|
_echo_write(radio, frame)
|
|
LOG.debug("Sent:\n%s" % util.hexprint(frame))
|
|
if data:
|
|
result = radio.pipe.read(1)
|
|
if result != b"\x06":
|
|
_finish(radio)
|
|
LOG.debug("Ack was: %s" % repr(result))
|
|
raise errors.RadioError("Radio did not accept block at %04x"
|
|
% addr)
|
|
return
|
|
result = _read(radio, length + 6)
|
|
LOG.debug("Got:\n%s" % util.hexprint(result))
|
|
header = result[:4]
|
|
data = result[4:-2]
|
|
ack = result[-1:]
|
|
if ack != b"\x06":
|
|
_finish(radio)
|
|
LOG.debug("Ack was: %s" % repr(ack))
|
|
raise errors.RadioError("Radio NAK'd block at %04x" % addr)
|
|
_cmd, _addr, _length = struct.unpack(">cHb", header)
|
|
if _addr != addr or _length != _length:
|
|
_finish(radio)
|
|
LOG.debug("Expected/Received:")
|
|
LOG.debug(" Length: %02x/%02x" % (length, _length))
|
|
LOG.debug(" Addr: %04x/%04x" % (addr, _addr))
|
|
raise errors.RadioError("Radio send unexpected block")
|
|
cs = _checksum(result[1:-2])
|
|
if cs != result[-2]:
|
|
_finish(radio)
|
|
LOG.debug("Calculated: %02x" % cs)
|
|
LOG.debug("Actual: %02x" % result[-2])
|
|
raise errors.RadioError("Block at 0x%04x failed checksum" % addr)
|
|
return data
|
|
|
|
|
|
def _finish(radio):
|
|
endframe = b"\x45\x4E\x44"
|
|
_echo_write(radio, endframe)
|
|
result = radio.pipe.read(1)
|
|
if result != b"\x06":
|
|
LOG.error("Got:\n%s" % util.hexprint(result))
|
|
raise errors.RadioError("Radio did not finish cleanly")
|
|
|
|
|
|
def do_download(radio):
|
|
|
|
_ident(radio)
|
|
|
|
_memobj = None
|
|
data = b""
|
|
|
|
for addr in range(0, radio._memsize, 0x10):
|
|
block = _send(radio, b'R', addr, 0x10)
|
|
data += block
|
|
status = chirp_common.Status()
|
|
status.cur = len(data)
|
|
status.max = radio._memsize
|
|
status.msg = "Downloading from radio"
|
|
radio.status_fn(status)
|
|
|
|
_finish(radio)
|
|
|
|
return memmap.MemoryMapBytes(data)
|
|
|
|
|
|
def do_upload(radio):
|
|
model, bandlimit = _ident(radio)
|
|
_embedded = radio._memobj.embedded_msg
|
|
|
|
if model != str(_embedded.radio_type):
|
|
LOG.warning('radio and image model types differ')
|
|
LOG.warning('model type (radio): %s' % str(model))
|
|
LOG.warning('model type (image): %s' % str(_embedded.radio_type))
|
|
|
|
_finish(radio)
|
|
|
|
msg = ("The upload was stopped because the radio type "
|
|
"of the image (%s) does not match that "
|
|
"of the radio (%s).")
|
|
raise errors.RadioError(msg % (str(_embedded.radio_type), str(model)))
|
|
|
|
if bandlimit != int(_embedded.mode):
|
|
if str(_embedded.radio_type).rstrip("\00") in ["RT98U", "AT-779U"]:
|
|
image_band_limits = LIST_RT98U_FREQS[int(_embedded.mode)]
|
|
if str(_embedded.radio_type).rstrip("\00") in ["RT98V", "AT-779V"]:
|
|
image_band_limits = LIST_RT98V_FREQS[int(_embedded.mode)]
|
|
if str(_embedded.radio_type).rstrip("\00") in ["RT98W", "AT-779W"]:
|
|
image_band_limits = LIST_RT98W_FREQS[int(_embedded.mode)]
|
|
if str(model).rstrip("\00") in ["RT98U", "AT-779U"]:
|
|
radio_band_limits = LIST_RT98U_FREQS[int(bandlimit)]
|
|
if str(model).rstrip("\00") in ["RT98V", "AT-779V"]:
|
|
radio_band_limits = LIST_RT98V_FREQS[int(bandlimit)]
|
|
if str(model).rstrip("\00") in ["RT98W", "AT-779W"]:
|
|
radio_band_limits = LIST_RT98W_FREQS[int(bandlimit)]
|
|
|
|
LOG.warning('radio and image band limits differ')
|
|
LOG.warning('image band limits: %s' % image_band_limits)
|
|
LOG.warning('radio band limits: %s' % radio_band_limits)
|
|
|
|
_finish(radio)
|
|
|
|
msg = ("The upload was stopped because the band limits "
|
|
"of the image (%s) does not match that "
|
|
"of the radio (%s).")
|
|
raise errors.RadioError(msg % (image_band_limits, radio_band_limits))
|
|
|
|
try:
|
|
for start, end in radio._ranges:
|
|
for addr in range(start, end, 0x10):
|
|
block = radio._mmap[addr:addr+0x10]
|
|
_send(radio, b'W', addr, len(block), block)
|
|
status = chirp_common.Status()
|
|
status.cur = addr
|
|
status.max = end
|
|
status.msg = "Uploading to Radio"
|
|
radio.status_fn(status)
|
|
_finish(radio)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception as e:
|
|
_finish(radio)
|
|
raise errors.RadioError('Failed to upload to radio: %s' % e)
|
|
|
|
|
|
#
|
|
# The base class, extended for use with other models
|
|
#
|
|
class Rt98BaseRadio(chirp_common.CloneModeRadio,
|
|
chirp_common.ExperimentalRadio):
|
|
"""Retevis RT98 Base"""
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT98 Base"
|
|
BAUD_RATE = 9600
|
|
|
|
_memsize = 0x3E00
|
|
_ranges = [(0x0000, 0x3310),
|
|
(0x3320, 0x3390)]
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = ("The Retevis RT98 driver is an beta version."
|
|
"Proceed with Caution and backup your data")
|
|
return rp
|
|
|
|
def get_features(self):
|
|
class FakeEmbedded(object):
|
|
mode = 0
|
|
radio_type = 'RT98U'
|
|
|
|
if self._memobj:
|
|
_embedded = self._memobj.embedded_msg
|
|
else:
|
|
# If we have no memory object, take defaults for unit
|
|
# test, make_supported, etc
|
|
_embedded = FakeEmbedded()
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.can_odd_split = True
|
|
rf.has_name = True
|
|
if _embedded.mode == 0: # PMR or FreeNet
|
|
rf.has_offset = False
|
|
else:
|
|
rf.has_offset = True
|
|
rf.has_ctone = True
|
|
rf.has_cross = True
|
|
rf.has_tuning_step = False
|
|
rf.has_dtcs = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_dtcs_polarity = True
|
|
rf.valid_skips = ["", "S"]
|
|
rf.memory_bounds = (1, 199)
|
|
rf.valid_name_length = 6
|
|
if _embedded.mode == 0: # PMR or FreeNet
|
|
rf.valid_duplexes = ['', 'off']
|
|
else:
|
|
rf.valid_duplexes = DUPLEXES + ['split', 'off']
|
|
rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "- "
|
|
rf.valid_modes = ['FM', 'NFM']
|
|
rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross']
|
|
rf.valid_cross_modes = CROSS_MODES
|
|
if _embedded.mode == 0: # PMR or FreeNet
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98U":
|
|
rf.valid_power_levels = PMR_POWER_LEVELS
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98V":
|
|
rf.valid_power_levels = FREENET_POWER_LEVELS
|
|
else:
|
|
rf.valid_power_levels = POWER_LEVELS
|
|
rf.valid_tones = TONES
|
|
rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES
|
|
|
|
try:
|
|
rf.valid_bands = get_band_limits_Hz(
|
|
str(_embedded.radio_type),
|
|
int(_embedded.mode))
|
|
except TypeError:
|
|
# If we're asked without memory loaded, assume the most permissive
|
|
rf.valid_bands = get_band_limits_Hz(str(_embedded.radio_type), 1)
|
|
except Exception as e:
|
|
LOG.error('Failed to get band limits for RT98: %s' % e)
|
|
rf.valid_bands = get_band_limits_Hz(str(_embedded.radio_type), 1)
|
|
|
|
rf.valid_tuning_steps = TUNING_STEPS
|
|
return rf
|
|
|
|
# Do a download of the radio from the serial port
|
|
def sync_in(self):
|
|
self._mmap = do_download(self)
|
|
self.process_mmap()
|
|
|
|
# Do an upload of the radio to the serial port
|
|
def sync_out(self):
|
|
do_upload(self)
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
# Return a raw representation of the memory object, which
|
|
# is very helpful for development
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number - 1])
|
|
|
|
def _get_dcs_index(self, _mem, which):
|
|
base = getattr(_mem, '%scode' % which)
|
|
extra = getattr(_mem, '%sdcsextra' % which)
|
|
return (int(extra) << 8) | int(base)
|
|
|
|
def _set_dcs_index(self, _mem, which, index):
|
|
base = getattr(_mem, '%scode' % which)
|
|
extra = getattr(_mem, '%sdcsextra' % which)
|
|
base.set_value(index & 0xFF)
|
|
extra.set_value(index >> 8)
|
|
|
|
# Extract a high-level memory object from the low-level memory map
|
|
# This is called to populate a memory in the UI
|
|
def get_memory(self, number):
|
|
_embedded = self._memobj.embedded_msg
|
|
# Get a low-level memory object mapped to the image
|
|
_mem = self._memobj.memory[number - 1]
|
|
|
|
# get flag info
|
|
cbyte = (number - 1) / 8
|
|
cbit = 7 - ((number - 1) % 8)
|
|
setflag = self._memobj.csetflag[cbyte].c[cbit]
|
|
skipflag = self._memobj.cskipflag[cbyte].c[cbit]
|
|
|
|
mem = chirp_common.Memory()
|
|
|
|
mem.number = number # Set the memory number
|
|
|
|
# We'll consider any blank (i.e. 0 MHz frequency) to be empty
|
|
if _mem.freq == 0:
|
|
mem.empty = True
|
|
return mem
|
|
|
|
if setflag == 0:
|
|
mem.empty = True
|
|
return mem
|
|
|
|
if _mem.get_raw()[0] == b"\xFF":
|
|
mem.empty = True
|
|
return mem
|
|
|
|
# set the name
|
|
mem.name = str(_mem.name).rstrip() # Set the alpha tag
|
|
|
|
# Convert your low-level frequency and offset to Hertz
|
|
mem.freq = int(_mem.freq) * 10
|
|
mem.offset = int(_mem.offset) * 10
|
|
|
|
# Set the duplex flags
|
|
if _mem.tx_off: # handle tx off
|
|
mem.duplex = 'off'
|
|
elif _mem.duplex == DUPLEX_POSSPLIT:
|
|
mem.duplex = '+'
|
|
elif _mem.duplex == DUPLEX_NEGSPLIT:
|
|
mem.duplex = '-'
|
|
elif _mem.duplex == DUPLEX_NOSPLIT:
|
|
mem.duplex = ''
|
|
elif _mem.duplex == DUPLEX_ODDSPLIT:
|
|
mem.duplex = 'split'
|
|
else:
|
|
LOG.error('%s: get_mem: unhandled duplex: %02x' %
|
|
(mem.name, _mem.duplex))
|
|
|
|
# Set the channel width
|
|
if _mem.channel_width == CHANNEL_WIDTH_12d5kHz:
|
|
mem.mode = 'NFM'
|
|
elif _embedded.mode == 0: # PMR or FreeNet
|
|
LOG.info('PMR and FreeNet channels must be Channel Width 12.5 kHz')
|
|
mem.mode = 'NFM'
|
|
elif _mem.channel_width == CHANNEL_WIDTH_25kHz:
|
|
mem.mode = 'FM'
|
|
elif _mem.channel_width == CHANNEL_WIDTH_20kHz:
|
|
LOG.info(
|
|
'%s: get_mem: promoting 20 kHz channel width to 25 kHz' %
|
|
mem.name)
|
|
mem.mode = 'FM'
|
|
else:
|
|
LOG.error('%s: get_mem: unhandled channel width: 0x%02x' %
|
|
(mem.name, _mem.channel_width))
|
|
|
|
# set the power level
|
|
if _embedded.mode == 0: # PMR or FreeNet
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98U":
|
|
LOG.info('using PMR power levels')
|
|
_levels = PMR_POWER_LEVELS
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98V":
|
|
LOG.info('using FreeNet power levels')
|
|
_levels = FREENET_POWER_LEVELS
|
|
else: # COM or COMII
|
|
LOG.info('using general power levels')
|
|
_levels = POWER_LEVELS
|
|
|
|
if _mem.txpower == TXPOWER_LOW:
|
|
mem.power = _levels[0]
|
|
elif _embedded.mode == 0: # PMR or FreeNet
|
|
LOG.info('FreeNet or PMR channel is not set to TX Power Low')
|
|
LOG.info('Setting channel to TX Power Low')
|
|
mem.power = _levels[0]
|
|
elif _mem.txpower == TXPOWER_MED:
|
|
mem.power = _levels[1]
|
|
elif _mem.txpower == TXPOWER_HIGH:
|
|
mem.power = _levels[2]
|
|
else:
|
|
LOG.error('%s: get_mem: unhandled power level: 0x%02x' %
|
|
(mem.name, _mem.txpower))
|
|
|
|
# CTCSS Tones and DTCS Codes
|
|
rxtone = txtone = None
|
|
|
|
rxmode = TMODES[_mem.rxtmode]
|
|
txmode = TMODES[_mem.txtmode]
|
|
|
|
if rxmode == "Tone":
|
|
rxtone = TONES[_mem.rxtone]
|
|
elif rxmode == "DTCS":
|
|
rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(
|
|
_mem, 'rx')]
|
|
|
|
if txmode == "Tone":
|
|
txtone = TONES[_mem.txtone]
|
|
elif txmode == "DTCS":
|
|
txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(
|
|
_mem, 'tx')]
|
|
|
|
rxpol = _mem.rxinv and "R" or "N"
|
|
txpol = _mem.txinv and "R" or "N"
|
|
|
|
chirp_common.split_tone_decode(mem,
|
|
(txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol))
|
|
|
|
# Check if this memory is in the scan enabled list
|
|
mem.skip = "S" if skipflag == 0 else ""
|
|
|
|
# Extra
|
|
mem.extra = RadioSettingGroup("extra", "Extra")
|
|
|
|
rs = RadioSettingValueBoolean(bool(_mem.busychannellockout))
|
|
rset = RadioSetting("busychannellockout", "Busy channel lockout", rs)
|
|
mem.extra.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(bool(_mem.reverse))
|
|
rset = RadioSetting("reverse", "Reverse", rs)
|
|
mem.extra.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(bool(_mem.talkaround))
|
|
rset = RadioSetting("talkaround", "Talk around", rs)
|
|
mem.extra.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(bool(_mem.squelch_mode))
|
|
rset = RadioSetting("squelch_mode", "Squelch mode", rs)
|
|
rset.set_doc(_('Honor the CTCSS/DCS receive squelch configuration '
|
|
'when enabled, else only carrier squelch'))
|
|
mem.extra.append(rset)
|
|
|
|
return mem
|
|
|
|
# Store details about a high-level memory to the memory map
|
|
# This is called when a user edits a memory in the UI
|
|
def set_memory(self, mem):
|
|
_embedded = self._memobj.embedded_msg
|
|
# Get a low-level memory object mapped to the image
|
|
|
|
_mem = self._memobj.memory[mem.number - 1]
|
|
|
|
cbyte = (mem.number - 1) / 8
|
|
cbit = 7 - ((mem.number - 1) % 8)
|
|
|
|
if mem.empty:
|
|
self._memobj.csetflag[cbyte].c[cbit] = 0
|
|
self._memobj.cskipflag[cbyte].c[cbit] = 0
|
|
_mem.set_raw("\xff" * 32)
|
|
return
|
|
|
|
_mem.set_raw("\x00" * 32)
|
|
|
|
# FreeNet and PMR radio types
|
|
if _embedded.mode == 0: # PMR or FreeNet
|
|
|
|
mem.mode = 'NFM'
|
|
mem.offset = 0
|
|
|
|
# FreeNet
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98V":
|
|
if mem.number >= 1 and mem.number <= 6:
|
|
FREENET_FREQ = FREENET_FREQS[mem.number - 1]
|
|
mem.freq = FREENET_FREQ
|
|
else:
|
|
_mem.tx_off = 1
|
|
mem.duplex = 'off'
|
|
|
|
# PMR
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98U":
|
|
if mem.number >= 1 and mem.number <= 16:
|
|
PMR_FREQ = PMR_FREQS[mem.number - 1]
|
|
mem.freq = PMR_FREQ
|
|
else:
|
|
_mem.tx_off = 1
|
|
mem.duplex = 'off'
|
|
|
|
# set the occupied bitfield
|
|
self._memobj.csetflag[cbyte].c[cbit] = 1
|
|
# set the scan add bitfield
|
|
self._memobj.cskipflag[cbyte].c[cbit] = 0 if (mem.skip == "S") else 1
|
|
|
|
_mem.freq = mem.freq / 10 # Convert to low-level frequency
|
|
_mem.offset = mem.offset / 10 # Convert to low-level frequency
|
|
|
|
# Store the alpha tag
|
|
_mem.name = mem.name.ljust(6)[:6] # Store the alpha tag
|
|
|
|
# Set duplex bitfields
|
|
_mem.tx_off = 0
|
|
if mem.duplex == 'off': # handle tx off
|
|
_mem.tx_off = 1
|
|
elif mem.duplex == '+':
|
|
_mem.duplex = DUPLEX_POSSPLIT
|
|
elif mem.duplex == '-':
|
|
_mem.duplex = DUPLEX_NEGSPLIT
|
|
elif mem.duplex == '':
|
|
_mem.duplex = DUPLEX_NOSPLIT
|
|
elif mem.duplex == 'split':
|
|
diff = mem.offset - mem.freq
|
|
_mem.duplex = DUPLEXES.index("-") \
|
|
if diff < 0 else DUPLEXES.index("+")
|
|
_mem.offset = abs(diff) / 10
|
|
else:
|
|
LOG.error('%s: set_mem: unhandled duplex: %s' %
|
|
(mem.name, mem.duplex))
|
|
|
|
# Set the channel width - remember we promote 20 kHz channels to FM
|
|
# on import, so don't handle them here
|
|
if mem.mode == 'FM':
|
|
_mem.channel_width = CHANNEL_WIDTH_25kHz
|
|
elif mem.mode == 'NFM':
|
|
_mem.channel_width = CHANNEL_WIDTH_12d5kHz
|
|
else:
|
|
LOG.error('%s: set_mem: unhandled mode: %s' % (
|
|
mem.name, mem.mode))
|
|
|
|
# CTCSS Tones and DTCS Codes
|
|
((txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
|
|
|
|
_mem.txtmode = TMODES.index(txmode)
|
|
|
|
_mem.rxtmode = TMODES.index(rxmode)
|
|
|
|
if txmode == "Tone":
|
|
_mem.txtone = TONES.index(txtone)
|
|
elif txmode == "DTCS":
|
|
self._set_dcs_index(_mem, 'tx',
|
|
chirp_common.ALL_DTCS_CODES.index(txtone))
|
|
|
|
_mem.squelch_mode = False
|
|
if rxmode == "Tone":
|
|
_mem.rxtone = TONES.index(rxtone)
|
|
_mem.squelch_mode = True
|
|
elif rxmode == "DTCS":
|
|
self._set_dcs_index(_mem, 'rx',
|
|
chirp_common.ALL_DTCS_CODES.index(rxtone))
|
|
_mem.squelch_mode = True
|
|
|
|
_mem.txinv = txpol == "R"
|
|
_mem.rxinv = rxpol == "R"
|
|
|
|
# set the power level
|
|
if _embedded.mode == 0: # PMR or FreeNet
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98U":
|
|
LOG.info('using PMR power levels')
|
|
_levels = PMR_POWER_LEVELS
|
|
if str(_embedded.radio_type).rstrip("\00") == "RT98V":
|
|
LOG.info('using FreeNet power levels')
|
|
_levels = FREENET_POWER_LEVELS
|
|
else: # COM or COMII
|
|
LOG.info('using general power levels')
|
|
_levels = POWER_LEVELS
|
|
|
|
if mem.power is None:
|
|
_mem.txpower = TXPOWER_HIGH
|
|
elif mem.power == _levels[0]:
|
|
_mem.txpower = TXPOWER_LOW
|
|
elif _embedded.mode == 0: # PMR or FreeNet
|
|
LOG.info('FreeNet or PMR channel is not set to TX Power Low')
|
|
LOG.info('Setting channel to TX Power Low')
|
|
_mem.txpower = TXPOWER_LOW
|
|
elif mem.power == _levels[1]:
|
|
_mem.txpower = TXPOWER_MED
|
|
elif mem.power == _levels[2]:
|
|
_mem.txpower = TXPOWER_HIGH
|
|
else:
|
|
LOG.error('%s: set_mem: unhandled power level: %s' %
|
|
(mem.name, mem.power))
|
|
|
|
# extra settings
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
|
|
def _get_settings(self):
|
|
_embedded = self._memobj.embedded_msg
|
|
_settings = self._memobj.settings
|
|
_settings2 = self._memobj.settings2
|
|
_settings3 = self._memobj.settings3
|
|
_slabel = self._memobj.slabel
|
|
|
|
function = RadioSettingGroup("function", "Function Setup")
|
|
group = RadioSettings(function)
|
|
|
|
# Function Setup
|
|
# MODE SET
|
|
rs = RadioSettingValueList(LIST_DISPLAY_MODE,
|
|
current_index=_settings.display_mode)
|
|
rset = RadioSetting("display_mode", "Display Mode", rs)
|
|
function.append(rset)
|
|
|
|
if "AT-779" in str(_embedded.radio_type):
|
|
rs = RadioSettingValueList(LIST_VFOMR,
|
|
current_index=_settings3.vfomr)
|
|
rset = RadioSetting("settings3.vfomr", "VFO/MR", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueInteger(1, 199, _settings3.ch_number + 1)
|
|
rset = RadioSetting("settings3.ch_number", "Channel Number", rs)
|
|
function.append(rset)
|
|
|
|
# DISPLAY SET
|
|
def _filter(name):
|
|
filtered = ""
|
|
for char in str(name):
|
|
if char in chirp_common.CHARSET_ASCII:
|
|
filtered += char
|
|
else:
|
|
filtered += " "
|
|
return filtered
|
|
|
|
val = RadioSettingValueString(0, 6, _filter(_slabel.startname))
|
|
rs = RadioSetting("slabel.startname", "Startup Label", val)
|
|
function.append(rs)
|
|
|
|
# VOL SET
|
|
rs = RadioSettingValueBoolean(bool(_settings.beep))
|
|
rset = RadioSetting("beep", "Beep Prompt", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueInteger(1, 30, _settings.volume)
|
|
rset = RadioSetting("volume", "Volume Level", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueInteger(1, 16, _settings.mic_gain)
|
|
rset = RadioSetting("mic_gain", "Mic Gain", rs)
|
|
function.append(rset)
|
|
|
|
# ON/OFF SET
|
|
rs = RadioSettingValueList(LIST_APO,
|
|
current_index=_settings.auto_power_off)
|
|
rset = RadioSetting("auto_power_off", "Auto Power Off", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueList(
|
|
LIST_AOP, current_index=_settings.auto_power_on)
|
|
rset = RadioSetting("auto_power_on", "Power On Method", rs)
|
|
function.append(rset)
|
|
|
|
# STE SET
|
|
rs = RadioSettingValueList(LIST_STE_FREQ,
|
|
current_index=_settings.ste_frequency)
|
|
rset = RadioSetting("ste_frequency", "STE Frequency", rs)
|
|
rset.set_doc(_('Recommend using 55.2'))
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_STE_TYPE,
|
|
current_index=_settings.ste_type)
|
|
rset = RadioSetting("ste_type", "STE Type", rs)
|
|
function.append(rset)
|
|
|
|
# FUNCTION SET
|
|
rs = RadioSettingValueList(
|
|
LIST_STEP, current_index=_settings.tuning_step)
|
|
rset = RadioSetting("tuning_step", "Tuning Step", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_SQUELCH,
|
|
current_index=_settings.squelch)
|
|
rset = RadioSetting("squelch", "Squelch Level", rs)
|
|
function.append(rset)
|
|
|
|
if "AT-779" in str(_embedded.radio_type):
|
|
rs = RadioSettingValueList(LIST_SCAN,
|
|
current_index=_settings.scan_resume)
|
|
rset = RadioSetting("scan_resume", "Frequency Scan", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(bool(_settings.sql_key_function))
|
|
rset = RadioSetting("sql_key_function", "SQL Key Function", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_TIMEOUT,
|
|
current_index=_settings.timeout_timer)
|
|
rset = RadioSetting("timeout_timer", "Timeout Timer", rs)
|
|
function.append(rset)
|
|
|
|
# uncategorized
|
|
rs = RadioSettingValueBoolean(bool(_settings.save_chan_param))
|
|
rset = RadioSetting("save_chan_param", "Save Channel Parameters", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(bool(_settings.forbid_chan_menu))
|
|
rset = RadioSetting("forbid_chan_menu", "Forbid Channel Menu", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(bool(not _settings.forbid_initialize))
|
|
rset = RadioSetting("forbid_initialize", "Forbid Initialize", rs)
|
|
function.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(bool(_settings.forbid_setting))
|
|
rset = RadioSetting("forbid_setting", "Forbid Setting", rs)
|
|
function.append(rset)
|
|
|
|
# Information Of Scanning Channel
|
|
scanning = RadioSettingGroup("scanning", "Scanning Setup")
|
|
group.append(scanning)
|
|
|
|
rs = RadioSettingValueBoolean(bool(_settings2.scan_mode))
|
|
rset = RadioSetting("settings2.scan_mode", "Scan Mode", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_PRIORITY_CH,
|
|
current_index=_settings2.priority_ch)
|
|
rset = RadioSetting("settings2.priority_ch", "Priority Channel", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueInteger(1, 199, _settings2.priority_ch1 + 1)
|
|
rset = RadioSetting("settings2.priority_ch1", "Priority Channel 1", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueInteger(1, 199, _settings2.priority_ch2 + 1)
|
|
rset = RadioSetting("settings2.priority_ch2", "Priority Channel 2", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_REVERT_CH,
|
|
current_index=_settings2.revert_ch)
|
|
rset = RadioSetting("settings2.revert_ch", "Revert Channel", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_TIME46,
|
|
current_index=_settings2.look_back_time_a)
|
|
rset = RadioSetting("settings2.look_back_time_a",
|
|
"Look Back Time A", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_TIME46,
|
|
current_index=_settings2.look_back_time_b)
|
|
rset = RadioSetting("settings2.look_back_time_b",
|
|
"Look Back Time B", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_TIME50,
|
|
current_index=_settings2.dropout_delay_time)
|
|
rset = RadioSetting("settings2.dropout_delay_time",
|
|
"Dropout Delay Time", rs)
|
|
scanning.append(rset)
|
|
|
|
rs = RadioSettingValueList(LIST_TIME50,
|
|
current_index=_settings2.dwell_time)
|
|
rset = RadioSetting("settings2.dwell_time", "Dwell Time", rs)
|
|
scanning.append(rset)
|
|
|
|
# Embedded Message
|
|
embedded = RadioSettingGroup("embedded", "Embedded Message")
|
|
group.append(embedded)
|
|
|
|
rs = RadioSettingValueString(0, 7, _filter(_embedded.radio_type))
|
|
rs.set_mutable(False)
|
|
rset = RadioSetting("embedded_msg.radio_type", "Radio Type", rs)
|
|
embedded.append(rset)
|
|
|
|
if str(_embedded.radio_type).rstrip("\00") in ["RT98V", "AT-779V"]:
|
|
options = LIST_RT98V_MODES
|
|
elif str(_embedded.radio_type).rstrip("\00") in ["RT98W", "AT-779W"]:
|
|
options = LIST_RT98W_MODES
|
|
else:
|
|
options = LIST_RT98U_MODES
|
|
rs = RadioSettingValueList(options, current_index=_embedded.mode)
|
|
rs.set_mutable(False)
|
|
rset = RadioSetting("embedded_msg.mode", "Mode", rs)
|
|
embedded.append(rset)
|
|
|
|
# frequency
|
|
if str(_embedded.radio_type).rstrip("\00") in ["RT98V", "AT-779V"]:
|
|
options = LIST_RT98V_FREQS
|
|
elif str(_embedded.radio_type).rstrip("\00") in ["RT98W", "AT-779W"]:
|
|
options = LIST_RT98W_FREQS
|
|
else:
|
|
options = LIST_RT98U_FREQS
|
|
rs = RadioSettingValueList(options, current_index=_settings3.bandlimit)
|
|
rs.set_mutable(False)
|
|
rset = RadioSetting("settings3.bandlimit", "Frequency", rs)
|
|
embedded.append(rset)
|
|
|
|
rs = RadioSettingValueString(0, 10, _filter(_embedded.date_mfg))
|
|
rs.set_mutable(False)
|
|
rset = RadioSetting("embedded_msg.date_mfg", "Production Date", rs)
|
|
embedded.append(rset)
|
|
|
|
rs = RadioSettingValueString(0, 4, _filter(_embedded.mcu_version))
|
|
rs.set_mutable(False)
|
|
rset = RadioSetting("embedded_msg.mcu_version", "MCU Version", rs)
|
|
embedded.append(rset)
|
|
|
|
return group
|
|
|
|
def get_settings(self):
|
|
try:
|
|
return self._get_settings()
|
|
except:
|
|
import traceback
|
|
LOG.error("failed to parse settings")
|
|
traceback.print_exc()
|
|
return None
|
|
|
|
def set_settings(self, settings):
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
if "." in element.get_name():
|
|
bits = element.get_name().split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = self._memobj.settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug("using apply callback")
|
|
element.run_apply_callback()
|
|
elif setting == "ch_number":
|
|
setattr(obj, setting, int(element.value) - 1)
|
|
elif setting == "forbid_initialize":
|
|
setattr(obj, setting, not int(element.value))
|
|
elif setting == "priority_ch1":
|
|
setattr(obj, setting, int(element.value) - 1)
|
|
elif setting == "priority_ch2":
|
|
setattr(obj, setting, int(element.value) - 1)
|
|
elif element.value.get_mutable():
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
# This radio has always been post-metadata, so never do
|
|
# old-school detection
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class Rt98Radio(Rt98BaseRadio):
|
|
"""Retevis RT98"""
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT98"
|
|
# Allowed radio types is a dict keyed by model of a list of version
|
|
# strings
|
|
ALLOWED_RADIO_TYPES = {'RT98V': ['V100', 'V101'],
|
|
'RT98U': ['V100'],
|
|
'RT98W': ['V100'],
|
|
'AT-779V': ['V100'],
|
|
'AT-779U': ['V100'],
|
|
'AT-779W': ['V100'],
|
|
}
|