|
# Quansheng UV-K5 driver (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>
|
|
#
|
|
# based on template.py Copyright 2012 Dan Smith <dsmith@danplanet.com>
|
|
#
|
|
#
|
|
# This is a preliminary version of a driver for the UV-K5
|
|
# It is based on my reverse engineering effort described here:
|
|
# https://github.com/sq5bpf/uvk5-reverse-engineering
|
|
#
|
|
# Warning: this driver is experimental, it may brick your radio,
|
|
# eat your lunch and mess up your configuration.
|
|
#
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
#
|
|
# Adapted partially to IJV firmware v2.9 by Julian Lilov (LZ1JDL)
|
|
# http://www.hamskey.com/2024/04/introduction-to-uv-k5-hf-05-fullband.html#more
|
|
#
|
|
# Adapted full to IJV by Francesco IK8JHL
|
|
# FIX: QRA , Beacon/CQ CAll Message, Selettive , TX Enable, PTTID, Squelch A/B, Band TX, Band A/B TX , Singol Band enable, Satcom , Upconverter etc etc
|
|
# eliminatte funzioni non attive nel FW IJV
|
|
#
|
|
# Adapted partially to CEC firmware v0.5 by KD8CEC
|
|
# https://www.universirius.com/en_gb/preppers/quansheng-uv-k5-manuale-del-firmware-ijv/#Firmware-IJV
|
|
#
|
|
#JH11i
|
|
|
|
|
|
import os
|
|
import tempfile
|
|
import struct
|
|
import logging
|
|
|
|
from chirp import chirp_common, directory, bitwise, memmap, errors, util
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueInteger, RadioSettingValueString, \
|
|
RadioSettings
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
# Show the obfuscated version of commands. Not needed normally, but
|
|
# might be useful for someone who is debugging a similar radio
|
|
DEBUG_SHOW_OBFUSCATED_COMMANDS = False
|
|
|
|
# Show the memory being written/received. Not needed normally, because
|
|
# this is the same information as in the packet hexdumps, but
|
|
# might be useful for someone debugging some obscure memory issue
|
|
DEBUG_SHOW_MEMORY_ACTIONS = True
|
|
|
|
DEBUG_WRITE_RADIO_HEXDUMP = True
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0000;
|
|
struct {
|
|
// 0x00
|
|
u32 freq;
|
|
u32 offset;
|
|
|
|
// 0x08
|
|
u8 rx_freq_Code;
|
|
u8 tx_offset_Code;
|
|
struct {
|
|
u8 rx_CodeType:4,
|
|
tx_CodeType:4;
|
|
} tx_rx_CodeType;
|
|
struct {
|
|
u8 TX_OFFSET_FREQUENCY_DIRECTION:4,
|
|
Modulation:4;
|
|
} mod_tx_off;
|
|
struct {
|
|
u8 FrequencyReverse:1,
|
|
CHANNEL_BANDWIDTH:1,
|
|
OUTPUT_POWER:2,
|
|
BUSY_CHANNEL_LOCK:4;
|
|
} bcl_op_cb;
|
|
struct{
|
|
u8 unknown1:1,
|
|
DTMF_PTT_ID_TX_MODE:7;
|
|
} DTMF_PTT_ID_TX_MODE;
|
|
u8 STEP_SETTING;
|
|
u8 SCRAMBLING_TYPE;
|
|
|
|
} channel[207];
|
|
|
|
#seekto 0x0D60;
|
|
struct {
|
|
// ChannelAttributes_t start
|
|
u8 band;
|
|
u8 compander;
|
|
u8 is_scanlist2;
|
|
u8 is_scanlist1;
|
|
// end
|
|
} channel_attributes[207];
|
|
|
|
#seekto 0x0E70;
|
|
u8 CHAN_1_CALL;
|
|
u8 SQUELCH_LEVEL;
|
|
u8 TX_TIMEOUT_TIMER;
|
|
u8 NOAA_AUTO_SCAN;
|
|
u8 KEY_LOCK;
|
|
u8 VOX_SWITCH;
|
|
u8 VOX_LEVEL;
|
|
u8 MIC_SENSITIVITY;
|
|
|
|
#seekto 0x0E78;
|
|
struct {
|
|
u8 BACKLIGHT_MAX:4, BACKLIGHT_MIN:4;
|
|
} backlight;
|
|
u8 CHANNEL_DISPLAY_MODE;
|
|
u8 CROSS_BAND_RX_TX;
|
|
u8 BATTERY_SAVE;
|
|
u8 DUAL_WATCH;
|
|
u8 BACKLIGHT_TIME;
|
|
u8 TAIL_TONE_ELIMINATION;
|
|
u8 VFO_OPEN;
|
|
|
|
#seekto 0x0E80;
|
|
u8 ScreenChannel_0;
|
|
u8 ScreenChannel_1;
|
|
u8 MrChannel_0;
|
|
u8 MrChannel_1;
|
|
u8 FreqChannel_0;
|
|
u8 FreqChannel_1;
|
|
u8 NoaaChannel_0;
|
|
u8 NoaaChannel_1;
|
|
|
|
#seekto 0x0E90;
|
|
struct {
|
|
u8 BEEP_CONTROL:1, KEY_M_LONG_PRESS_ACTION: 7;
|
|
} beep_key_long_press;
|
|
u8 KEY_1_SHORT_PRESS_ACTION;
|
|
u8 KEY_1_LONG_PRESS_ACTION;
|
|
u8 KEY_2_SHORT_PRESS_ACTION;
|
|
u8 KEY_2_LONG_PRESS_ACTION;
|
|
u8 SCAN_RESUME_MODE;
|
|
u8 AUTO_KEYPAD_LOCK;
|
|
u8 POWER_ON_DISPLAY_MODE;
|
|
|
|
#seekto 0x0E98;
|
|
u32 POWER_ON_PASSWORD;
|
|
|
|
#seekto 0x0EA0;
|
|
u8 VOICE_PROMPT;
|
|
u8 S0_LEVEL;
|
|
u8 S9_LEVEL;
|
|
|
|
#seekto 0x0EA8;
|
|
u8 ALARM_MODE;
|
|
u8 ROGER;
|
|
u8 REPEATER_TAIL_TONE_ELIMINATION;
|
|
u8 TX_VFO;
|
|
u8 BATTERY_TYPE;
|
|
|
|
#seekto 0x0EB0;
|
|
char EEPROM_WELCOMESTRING1[16];
|
|
char EEPROM_WELCOMESTRING2[16];
|
|
|
|
#seekto 0x0ED0;
|
|
u8 DTMF_SIDE_TONE;
|
|
char DTMF_SEPARATE_CODE;
|
|
char DTMF_GROUP_CALL_CODE;
|
|
u8 DTMF_DECODE_RESPONSE;
|
|
u8 DTMF_auto_reset_time;
|
|
u8 DTMF_PRELOAD_TIME;
|
|
u8 DTMF_FIRST_CODE_PERSIST_TIME;
|
|
u8 DTMF_HASH_CODE_PERSIST_TIME;
|
|
u8 DTMF_CODE_PERSIST_TIME;
|
|
u8 DTMF_CODE_INTERVAL_TIME;
|
|
u8 PERMIT_REMOTE_KILL;
|
|
|
|
#seekto 0x0EE0;
|
|
char ANI_DTMF_ID[8];
|
|
|
|
#seekto 0x0EE8;
|
|
char KILL_CODE[8];
|
|
|
|
#seekto 0x0EF0;
|
|
char REVIVE_CODE[8];
|
|
|
|
#seekto 0x0EF8;
|
|
char DTMF_UP_CODE[16];
|
|
|
|
#seekto 0x0F08;
|
|
char DTMF_DOWN_CODE[16];
|
|
|
|
#seekto 0x0F18;
|
|
u8 SCANLIST_DEFAULT;
|
|
u8 SCANLIST1_ENABLED;
|
|
u8 SCANLIST1_PRIORITY_CH1;
|
|
u8 SCANLIST1_PRIORITY_CH2;
|
|
u8 SCANLIST2_ENABLED;
|
|
u8 SCANLIST2_PRIORITY_CH1;
|
|
u8 SCANLIST2_PRIORITY_CH2;
|
|
|
|
#seekto 0x0F30;
|
|
u8 bHasCustomAesKey;
|
|
|
|
#seekto 0x0F40;
|
|
u8 F_LOCK;
|
|
u8 350TX;
|
|
u8 KILLED;
|
|
u8 200TX;
|
|
u8 350EN;
|
|
u8 en350;
|
|
u8 ScrambleEnable;
|
|
struct {
|
|
u8 Setting_TX_EN:1,
|
|
live_DTMF_decoder: 1,
|
|
batery_txt:2,
|
|
micbar:1,
|
|
am_fix:1,
|
|
bl_txrx:2;
|
|
} settings_0f40;
|
|
|
|
#seekto 0x0F50;
|
|
struct{
|
|
char name[16];
|
|
} channel_name[207];
|
|
|
|
// CEC_EEPROM_START1
|
|
#seekto 0x1D50;
|
|
u8 CEC_LiveSeekMode;
|
|
u8 CW_KEYTYPE;
|
|
u8 CW_SPEED;
|
|
u8 CW_TONE;
|
|
|
|
// DTMF contacts
|
|
#seekto 0x1C00;
|
|
struct {
|
|
char name[8];
|
|
char number[3];
|
|
char unused_00[5];
|
|
} dtmfcontact[16];
|
|
"""
|
|
|
|
# bits that we will save from the channel structure (mostly unknown)
|
|
SAVE_MASK_0A = 0b11001100
|
|
SAVE_MASK_0B = 0b11101100
|
|
SAVE_MASK_0C = 0b11100000
|
|
SAVE_MASK_0D = 0b11111000
|
|
SAVE_MASK_0E = 0b11110001
|
|
SAVE_MASK_0F = 0b11110000
|
|
|
|
# flags1
|
|
FLAGS1_OFFSET_NONE = 0b00
|
|
FLAGS1_OFFSET_MINUS = 0b10
|
|
FLAGS1_OFFSET_PLUS = 0b01
|
|
|
|
# flags2
|
|
|
|
POWER_HIGH = 0b10
|
|
POWER_MEDIUM = 0b01
|
|
POWER_LOW = 0b00
|
|
|
|
BANDWIDTH_WIDE = 0b00
|
|
BANDWIDTH_WIDE_PLUS = 0b11
|
|
BANDWIDTH_NARROW = 0b01
|
|
BANDWIDTH_NARROW_MINUS = 0b10
|
|
# bandwidth
|
|
BANDWIDTH_LIST = ["W", "N"]
|
|
|
|
# dtmf_flags
|
|
PTTID_LIST = ["off", "TX UP", "TX DOWN", "BOTH", "APOLLO" ]
|
|
|
|
# power
|
|
UVK5_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1.00),
|
|
chirp_common.PowerLevel("Med", watts=2.50),
|
|
chirp_common.PowerLevel("High", watts=5.00)
|
|
]
|
|
|
|
# scrambler // TODO Gibt es das in der Firmware?
|
|
SCRAMBLER_LIST = ["Off", "2600Hz", "2700Hz", "2800Hz", "2900Hz", "3000Hz", "3100Hz", "3200Hz", "3300Hz", "3400Hz", "3500Hz"]
|
|
|
|
# channel display mode
|
|
CHANNELDISP_LIST = ["Frequency", "Channel No", "Channel Name", "Name_S Freq_L"]
|
|
|
|
BATSAVE_LIST = ["Off", "50%", "67%", "75%", "80%"]
|
|
|
|
# compander // nur 0 1 2 als Werte Möglich, siehe bk4819.c Zeile 868
|
|
COMPANDER_LIST = ["Off", "TX", "RX"]
|
|
|
|
# mic gain
|
|
MICGAIN_LIST = ["+1.1dB","+4.0dB","+8.0dB","+12.0dB","+15.1dB"]
|
|
|
|
# Talk Time
|
|
TALKTIME_LIST = ["30s","1min","2min","3min","4min","5min","6min","7min","8min","9min","15min"]
|
|
|
|
# Backlight auto mode
|
|
BACKLIGHT_MIN_LIST = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
|
|
BACKLIGHT_MAX_LIST = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
|
|
|
|
BACKLIGHT_TX = ["Off", "TX", "RX", "TX/RX"]
|
|
|
|
# Crossband receiving/transmitting
|
|
CROSSBAND_LIST = ["Off", "VFO A", "VFO B"]
|
|
DUALWATCH_LIST = ["Off", "VFO A", "VFO B"]
|
|
# battery save
|
|
BATTERY_SAFE_LIST = ["Off", "1:4", "1:3", "1:2", "1:1"]
|
|
|
|
# steps
|
|
STEPS = [0.01, 0.05, 0.10, 0.25, 0.50, 1.00, 1.25, 2.50, 5.00, 6.25, 8.33, 9.00, 10.00, 12.50, 15.00, 20.00, 25.00, 30.00, 50.00, 100.00, 25.00, 125.00, 200.00, 250.00, 500.00]
|
|
|
|
# TODO *TCS???
|
|
# ctcss/dcs codes
|
|
TMODES = ["", "Tone", "DTCS", "DTCS"]
|
|
TONE_NONE = 0
|
|
TONE_CTCSS = 1
|
|
TONE_DCS = 2
|
|
TONE_RDCS = 3
|
|
|
|
|
|
CTCSS_TONES = [
|
|
67.0, 69.3, 71.9, 74.4, 77.0, 79.7, 82.5, 85.4,
|
|
88.5, 91.5, 94.8, 97.4, 100.0, 103.5, 107.2, 110.9,
|
|
114.8, 118.8, 123.0, 127.3, 131.8, 136.5, 141.3, 146.2,
|
|
151.4, 156.7, 159.8, 162.2, 165.5, 167.9, 171.3, 173.8,
|
|
177.3, 179.9, 183.5, 186.2, 189.9, 192.8, 196.6, 199.5,
|
|
203.5, 206.5, 210.7, 218.1, 225.7, 229.1, 233.6, 241.8,
|
|
250.3, 254.1
|
|
]
|
|
|
|
# lifted from ft4.py
|
|
DTCS_CODES = [
|
|
23, 25, 26, 31, 32, 36, 43, 47, 51, 53, 54,
|
|
65, 71, 72, 73, 74, 114, 115, 116, 122, 125, 131,
|
|
132, 134, 143, 145, 152, 155, 156, 162, 165, 172, 174,
|
|
205, 212, 223, 225, 226, 243, 244, 245, 246, 251, 252,
|
|
255, 261, 263, 265, 266, 271, 274, 306, 311, 315, 325,
|
|
331, 332, 343, 346, 351, 356, 364, 365, 371, 411, 412,
|
|
413, 423, 431, 432, 445, 446, 452, 454, 455, 462, 464,
|
|
465, 466, 503, 506, 516, 523, 526, 532, 546, 565, 606,
|
|
612, 624, 627, 631, 632, 654, 662, 664, 703, 712, 723,
|
|
731, 732, 734, 743, 754
|
|
]
|
|
|
|
# TODO required?
|
|
#FLOCK_LIST = ["Off", "FCC", "CE", "GB", "430", "438"]
|
|
|
|
SCANRESUME_LIST = ["TIME: Resume after 5 seconds",
|
|
"CARRIER: Resume after signal disappears",
|
|
"SEARCH: Stop scanning after receiving a signal",
|
|
"LOG"]
|
|
|
|
WELCOME_LIST = ["None", "FW Mod", "Message"]
|
|
KEYPADTONE_LIST = ["Off", "Chinese", "English"]
|
|
LANGUAGE_LIST = ["Chinese", "English"]
|
|
ALARMMODE_LIST = ["SITE", "TONE"]
|
|
REMENDOFTALK_LIST = ["Off", "Single", "Roger", "MDC 1200", "Apollo Quindar", "Digital Code ID"]
|
|
RTE_LIST = ["Off",
|
|
"1*100ms", "2*100ms", "3*100ms", "4*100ms", "5*100ms",
|
|
"6*100ms", "7*100ms", "8*100ms", "9*100ms", "10*100ms",
|
|
"11*100ms", "12*100ms", "13*100ms", "14*100ms", "15*100ms",
|
|
"16*100ms", "17*100ms", "18*100ms", "19*100ms", "20*100ms"]
|
|
|
|
MEM_SIZE = 0x2000 # size of all memory
|
|
PROG_SIZE = 0x1d00 # size of the memory that we will write
|
|
MEM_BLOCK = 0x80 # largest block of memory that we can reliably write
|
|
|
|
# fm radio supported frequencies
|
|
FMMIN = 76.0
|
|
FMMAX = 108.0
|
|
|
|
# bands supported by the UV-K5
|
|
BANDS = {
|
|
0: [15.0, 107.9999],
|
|
1: [108.0, 135.9999],
|
|
2: [136.0, 173.9990],
|
|
3: [174.0, 349.9999],
|
|
4: [350.0, 399.9999],
|
|
5: [400.0, 469.9999],
|
|
6: [470.0, 1299.9999]
|
|
}
|
|
|
|
# for radios with modified firmware:
|
|
BANDS_NOLIMITS = {
|
|
0: [15.0, 107.9999],
|
|
1: [108.0, 135.9999],
|
|
2: [136.0, 173.9990],
|
|
3: [174.0, 349.9999],
|
|
4: [350.0, 399.9999],
|
|
5: [400.0, 469.9999],
|
|
6: [470.0, 1299.9999]
|
|
}
|
|
|
|
SPECIALS = {
|
|
# "VFO A1(15-108)": 200,
|
|
# "VFO B1(15-108)": 201,
|
|
# "VFO A2(108-136)": 202,
|
|
# "VFO B2(108-136)": 203,
|
|
# "VFO A3(136-174)": 204,
|
|
# "VFO B3(136-174)": 205,
|
|
# "VFO A4(174-350)": 206,
|
|
# "VFO B4(174-350)": 207,
|
|
# "VFO A5(350-400)": 208,
|
|
# "VFO B5(350-400)": 209,
|
|
# "VFO A6(400-470)": 210,
|
|
# "VFO B6(400-470)": 211,
|
|
# "VFO A7(470-1300)": 212,
|
|
# "VFO B7(470-1300)": 213
|
|
}
|
|
|
|
VFO_CHANNEL_NAMES = ["F1(50M-76M)A", "F1(50M-76M)B",
|
|
"F2(108M-136M)A", "F2(108M-136M)B",
|
|
"F3(136M-174M)A", "F3(136M-174M)B",
|
|
"F4(174M-350M)A", "F4(174M-350M)B",
|
|
"F5(350M-400M)A", "F5(350M-400M)B",
|
|
"F6(400M-470M)A", "F6(400M-470M)B",
|
|
"F7(470M-600M)A", "F7(470M-600M)B"]
|
|
|
|
SCANLIST_LIST = ["None", "1", "2", "1+2"]
|
|
|
|
DTMF_CHARS = "0123456789ABCD*# "
|
|
DTMF_CHARS_ID = "0123456789ABCDabcd#* "
|
|
DTMF_CHARS_KILL = "0123456789ABCDabcd"
|
|
DTMF_CHARS_UPDOWN = "0123456789ABCDabcd#* "
|
|
DTMF_CODE_CHARS = "ABCD*# "
|
|
DTMF_DECODE_RESPONSE_LIST = ["None", "Ring", "Reply", "Both"]
|
|
|
|
KEYACTIONS_LIST = ["None", "Flashlight", "TX Power",
|
|
"Monitor", "Scan on/off", "VOX on/off",
|
|
"FM radio on/off", "VFO Change", "VFO Swap",
|
|
"SQL +", "SQL -", "REGA Test", "REGA Alarm", "CW Call CQ"]
|
|
|
|
UPCONV_LIST = ["Off","50", "125"]
|
|
|
|
# the communication is obfuscated using this fine mechanism
|
|
def xorarr(data: bytes):
|
|
tbl = [22, 108, 20, 230, 46, 145, 13, 64, 33, 53, 213, 64, 19, 3, 233, 128]
|
|
x = b""
|
|
r = 0
|
|
for byte in data:
|
|
x += bytes([byte ^ tbl[r]])
|
|
r = (r+1) % len(tbl)
|
|
return x
|
|
|
|
|
|
# if this crc was used for communication to AND from the radio, then it
|
|
# would be a measure to increase reliability.
|
|
# but it's only used towards the radio, so it's for further obfuscation
|
|
def calculate_crc16_xmodem(data: bytes):
|
|
poly = 0x1021
|
|
crc = 0x0
|
|
for byte in data:
|
|
crc = crc ^ (byte << 8)
|
|
for i in range(8):
|
|
crc = crc << 1
|
|
if (crc & 0x10000):
|
|
crc = (crc ^ poly) & 0xFFFF
|
|
return crc & 0xFFFF
|
|
|
|
|
|
def _send_command(serport, data: bytes):
|
|
"""Send a command to UV-K5 radio"""
|
|
LOG.debug("Sending command (unobfuscated) len=0x%4.4x:\n%s" %
|
|
(len(data), util.hexprint(data)))
|
|
|
|
crc = calculate_crc16_xmodem(data)
|
|
data2 = data + struct.pack("<H", crc)
|
|
|
|
command = struct.pack(">HBB", 0xabcd, len(data), 0) + \
|
|
xorarr(data2) + \
|
|
struct.pack(">H", 0xdcba)
|
|
if DEBUG_SHOW_OBFUSCATED_COMMANDS:
|
|
LOG.debug("Sending command (obfuscated):\n%s" % util.hexprint(command))
|
|
try:
|
|
result = serport.write(command)
|
|
except Exception:
|
|
raise errors.RadioError("Error writing data to radio")
|
|
return result
|
|
|
|
|
|
def _receive_reply(serport):
|
|
header = serport.read(4)
|
|
if len(header) != 4:
|
|
LOG.warning("Header short read: [%s] len=%i" %
|
|
(util.hexprint(header), len(header)))
|
|
raise errors.RadioError("Header short read")
|
|
if header[0] != 0xAB or header[1] != 0xCD or header[3] != 0x00:
|
|
LOG.warning("Bad response header: %s len=%i" %
|
|
(util.hexprint(header), len(header)))
|
|
raise errors.RadioError("Bad response header")
|
|
|
|
cmd = serport.read(int(header[2]))
|
|
if len(cmd) != int(header[2]):
|
|
LOG.warning("Body short read: [%s] len=%i" %
|
|
(util.hexprint(cmd), len(cmd)))
|
|
raise errors.RadioError("Command body short read")
|
|
|
|
footer = serport.read(4)
|
|
|
|
if len(footer) != 4:
|
|
LOG.warning("Footer short read: [%s] len=%i" %
|
|
(util.hexprint(footer), len(footer)))
|
|
raise errors.RadioError("Footer short read")
|
|
|
|
if footer[2] != 0xDC or footer[3] != 0xBA:
|
|
LOG.debug(
|
|
"Reply before bad response footer (obfuscated)"
|
|
"len=0x%4.4x:\n%s" % (len(cmd), util.hexprint(cmd)))
|
|
LOG.warning("Bad response footer: %s len=%i" %
|
|
(util.hexprint(footer), len(footer)))
|
|
raise errors.RadioError("Bad response footer")
|
|
|
|
if DEBUG_SHOW_OBFUSCATED_COMMANDS:
|
|
LOG.debug("Received reply (obfuscated) len=0x%4.4x:\n%s" %
|
|
(len(cmd), util.hexprint(cmd)))
|
|
|
|
cmd2 = xorarr(cmd)
|
|
|
|
LOG.debug("Received reply (unobfuscated) len=0x%4.4x:\n%s" %
|
|
(len(cmd2), util.hexprint(cmd2)))
|
|
|
|
return cmd2
|
|
|
|
|
|
def _getstring(data: bytes, begin, maxlen):
|
|
tmplen = min(maxlen+1, len(data))
|
|
s = [data[i] for i in range(begin, tmplen)]
|
|
for key, val in enumerate(s):
|
|
if val < ord(' ') or val > ord('~'):
|
|
break
|
|
return ''.join(chr(x) for x in s[0:key])
|
|
|
|
|
|
def _sayhello(serport):
|
|
hellopacket = b"\x14\x05\x04\x00\x6a\x39\x57\x64"
|
|
|
|
tries = 5
|
|
while True:
|
|
LOG.debug("Sending hello packet")
|
|
_send_command(serport, hellopacket)
|
|
o = _receive_reply(serport)
|
|
if (o):
|
|
break
|
|
tries -= 1
|
|
if tries == 0:
|
|
LOG.warning("Failed to initialise radio")
|
|
raise errors.RadioError("Failed to initialize radio")
|
|
firmware = _getstring(o, 4, 16)
|
|
LOG.info("Found firmware: %s" % firmware)
|
|
return firmware
|
|
|
|
|
|
def _readmem(serport, offset, length):
|
|
LOG.debug("Sending readmem offset=0x%4.4x len=0x%4.4x" % (offset, length))
|
|
|
|
readmem = b"\x1b\x05\x08\x00" + \
|
|
struct.pack("<HBB", offset, length, 0) + \
|
|
b"\x6a\x39\x57\x64"
|
|
_send_command(serport, readmem)
|
|
o = _receive_reply(serport)
|
|
if DEBUG_SHOW_MEMORY_ACTIONS:
|
|
LOG.debug("readmem Received data len=0x%4.4x:\n%s" %
|
|
(len(o), util.hexprint(o)))
|
|
return o[8:]
|
|
|
|
|
|
def _writemem(serport, data, offset):
|
|
LOG.debug("Sending writemem offset=0x%4.4x len=0x%4.4x" %
|
|
(offset, len(data)))
|
|
|
|
if DEBUG_SHOW_MEMORY_ACTIONS:
|
|
LOG.debug("writemem sent data offset=0x%4.4x len=0x%4.4x:\n%s" %
|
|
(offset, len(data), util.hexprint(data)))
|
|
|
|
dlen = len(data)
|
|
writemem = b"\x1d\x05" + \
|
|
struct.pack("<BBHBB", dlen+8, 0, offset, dlen, 1) + \
|
|
b"\x6a\x39\x57\x64"+data
|
|
|
|
_send_command(serport, writemem)
|
|
o = _receive_reply(serport)
|
|
|
|
LOG.debug("writemem Received data: %s len=%i" % (util.hexprint(o), len(o)))
|
|
|
|
if (o[0] == 0x1e
|
|
and
|
|
o[4] == (offset & 0xff)
|
|
and
|
|
o[5] == (offset >> 8) & 0xff):
|
|
return True
|
|
else:
|
|
LOG.warning("Bad data from writemem")
|
|
raise errors.RadioError("Bad response to writemem")
|
|
|
|
|
|
def _resetradio(serport):
|
|
resetpacket = b"\xdd\x05\x00\x00"
|
|
_send_command(serport, resetpacket)
|
|
|
|
|
|
def do_download(radio):
|
|
serport = radio.pipe
|
|
serport.timeout = 0.5
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = MEM_SIZE
|
|
status.msg = "Downloading from radio"
|
|
radio.status_fn(status)
|
|
|
|
eeprom = b""
|
|
f = _sayhello(serport)
|
|
if f:
|
|
radio.FIRMWARE_VERSION = f
|
|
else:
|
|
raise errors.RadioError('Unable to determine firmware version')
|
|
|
|
addr = 0
|
|
while addr < MEM_SIZE:
|
|
o = _readmem(serport, addr, MEM_BLOCK)
|
|
status.cur = addr
|
|
radio.status_fn(status)
|
|
|
|
if o and len(o) == MEM_BLOCK:
|
|
eeprom += o
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Memory download incomplete")
|
|
|
|
if DEBUG_WRITE_RADIO_HEXDUMP:
|
|
hex_data = _convert_to_intel_hex(eeprom)
|
|
_save_to_hex_file(hex_data, os.path.join(tempfile.gettempdir(), "radio_dump.hex"))
|
|
|
|
return memmap.MemoryMapBytes(eeprom)
|
|
|
|
|
|
def _convert_to_intel_hex(data):
|
|
hex_data = ""
|
|
for i in range(0, len(data), 16):
|
|
chunk = data[i:i+16]
|
|
hex_data += ":"
|
|
hex_data += format(len(chunk), "02X")
|
|
hex_data += format(i >> 8, "04X")
|
|
hex_data += format(i & 0xFF, "02X")
|
|
hex_data += "00"
|
|
for byte in chunk:
|
|
hex_data += format(byte, "02X")
|
|
checksum = (len(chunk) + (i >> 8) + (i & 0xFF)) & 0xFF
|
|
checksum = ((~checksum) + 1) & 0xFF
|
|
hex_data += format(checksum, "02X")
|
|
hex_data += "\n"
|
|
hex_data += ":00000001FF" # End of file record
|
|
return hex_data
|
|
|
|
|
|
def _save_to_hex_file(data, filename):
|
|
with open(filename, "w") as f:
|
|
f.write(data)
|
|
|
|
|
|
def do_upload(radio):
|
|
serport = radio.pipe
|
|
serport.timeout = 0.5
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = PROG_SIZE
|
|
status.msg = "Uploading to radio"
|
|
radio.status_fn(status)
|
|
|
|
f = _sayhello(serport)
|
|
if f:
|
|
radio.FIRMWARE_VERSION = f
|
|
else:
|
|
return False
|
|
|
|
addr = 0
|
|
while addr < PROG_SIZE:
|
|
o = radio.get_mmap()[addr:addr+MEM_BLOCK]
|
|
_writemem(serport, o, addr)
|
|
status.cur = addr
|
|
radio.status_fn(status)
|
|
if o:
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Memory upload incomplete")
|
|
status.msg = "Uploaded OK"
|
|
|
|
_resetradio(serport)
|
|
|
|
return True
|
|
|
|
|
|
def _find_band(nolimits, hz):
|
|
mhz = hz/1000000.0
|
|
if nolimits:
|
|
B = BANDS_NOLIMITS
|
|
else:
|
|
B = BANDS
|
|
|
|
# currently the hacked firmware sets band=1 below 50 MHz
|
|
if nolimits and mhz < 50.0:
|
|
return 1
|
|
|
|
for a in B:
|
|
if mhz >= B[a][0] and mhz <= B[a][1]:
|
|
return a
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class UVK5Radio(chirp_common.CloneModeRadio):
|
|
"""Quansheng UV-K5"""
|
|
VENDOR = "Quansheng"
|
|
MODEL = "UV-K5-CEC"
|
|
BAUD_RATE = 38400
|
|
NEEDS_COMPAT_SERIAL = False
|
|
FIRMWARE_VERSION = ""
|
|
_expanded_limits = True
|
|
|
|
def get_prompts(x=None):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = _(
|
|
'This is an experimental driver for the Quansheng UV-K5. '
|
|
'It may harm your radio, or worse. Use at your own risk.\n\n'
|
|
'Before attempting to do any changes please download '
|
|
'the memory image from the radio with chirp '
|
|
'and keep it. This can be later used to recover the '
|
|
'original settings. \n\n'
|
|
'some details are not yet implemented')
|
|
rp.pre_download = _(
|
|
"1. Turn radio on.\n"
|
|
"2. Connect cable to mic/spkr connector.\n"
|
|
"3. Make sure connector is firmly connected.\n"
|
|
"4. Click OK to download image from device.\n\n"
|
|
"It will may not work if you turn on the radio "
|
|
"with the cable already attached\n")
|
|
rp.pre_upload = _(
|
|
"1. Turn radio on.\n"
|
|
"2. Connect cable to mic/spkr connector.\n"
|
|
"3. Make sure connector is firmly connected.\n"
|
|
"4. Click OK to upload the image to device.\n\n"
|
|
"It will may not work if you turn on the radio "
|
|
"with the cable already attached")
|
|
return rp
|
|
|
|
# Return information about this radio's features, including
|
|
# how many memories it has, what bands it supports, etc
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_bank = False
|
|
rf.valid_dtcs_codes = DTCS_CODES
|
|
rf.has_rx_dtcs = True
|
|
rf.has_ctone = True
|
|
rf.has_settings = True
|
|
rf.has_comment = False
|
|
rf.valid_name_length = 10
|
|
rf.valid_power_levels = UVK5_POWER_LEVELS
|
|
rf.valid_special_chans = list(SPECIALS.keys())
|
|
rf.valid_duplexes = ["", "-", "+", "off"]
|
|
|
|
# hack so we can input any frequency,
|
|
# the 0.1 and 0.01 steps don't work unfortunately
|
|
# rf.valid_tuning_steps = [0.01, 0.1, 1.0] + STEPS
|
|
rf.valid_tuning_steps = STEPS
|
|
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
|
|
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
|
|
|
|
rf.valid_characters = chirp_common.CHARSET_ASCII
|
|
rf.valid_modes = ["FM", "AM", "USB", "CW"]
|
|
|
|
rf.valid_skips = [""]
|
|
|
|
# This radio supports memories 1-200, 201-214 are the VFO memories
|
|
rf.memory_bounds = (1, 200)
|
|
|
|
rf.valid_bands = []
|
|
for a in BANDS_NOLIMITS:
|
|
rf.valid_bands.append(
|
|
(int(BANDS_NOLIMITS[a][0]*1000000),
|
|
int(BANDS_NOLIMITS[a][1]*1000000)))
|
|
return rf
|
|
|
|
# Do a download of the radio from the serial port
|
|
def sync_in(self):
|
|
self._mmap = do_download(self)
|
|
self.process_mmap()
|
|
|
|
# Do an upload of the radio to the serial port
|
|
def sync_out(self):
|
|
do_upload(self)
|
|
|
|
# Convert the raw byte array into a memory object structure
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
# Return a raw representation of the memory object, which
|
|
# is very helpful for development
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.channel[number-1])
|
|
|
|
def validate_memory(self, mem):
|
|
msgs = super().validate_memory(mem)
|
|
|
|
if mem.duplex == 'off':
|
|
return msgs
|
|
|
|
# find tx frequency
|
|
if mem.duplex == '-':
|
|
txfreq = mem.freq - mem.offset
|
|
elif mem.duplex == '+':
|
|
txfreq = mem.freq + mem.offset
|
|
else:
|
|
txfreq = mem.freq
|
|
|
|
# find band
|
|
band = _find_band(self._expanded_limits, txfreq)
|
|
if band is False:
|
|
msg = "Transmit frequency %.4f MHz is not supported by this radio"\
|
|
% (txfreq/1000000.0)
|
|
msgs.append(chirp_common.ValidationError(msg))
|
|
|
|
band = _find_band(self._expanded_limits, mem.freq)
|
|
if band is False:
|
|
msg = "The frequency %.4f MHz is not supported by this radio" \
|
|
% (mem.freq/1000000.0)
|
|
msgs.append(chirp_common.ValidationError(msg))
|
|
|
|
return msgs
|
|
|
|
def _set_tone(self, mem, _mem):
|
|
((txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
|
|
|
|
if txmode == "Tone":
|
|
txtoval = CTCSS_TONES.index(txtone)
|
|
txmoval = 0b01
|
|
elif txmode == "DTCS":
|
|
txmoval = txpol == "R" and 0b11 or 0b10
|
|
txtoval = DTCS_CODES.index(txtone)
|
|
else:
|
|
txmoval = 0
|
|
txtoval = 0
|
|
|
|
if rxmode == "Tone":
|
|
rxtoval = CTCSS_TONES.index(rxtone)
|
|
rxmoval = 0b01
|
|
elif rxmode == "DTCS":
|
|
rxmoval = rxpol == "R" and 0b11 or 0b10
|
|
rxtoval = DTCS_CODES.index(rxtone)
|
|
else:
|
|
rxmoval = 0
|
|
rxtoval = 0
|
|
|
|
_mem.rxcodeflag = rxmoval
|
|
_mem.txcodeflag = txmoval
|
|
_mem.unknown1 = 0
|
|
_mem.unknown2 = 0
|
|
_mem.rxcode = rxtoval
|
|
_mem.txcode = txtoval
|
|
|
|
def _get_tone(self, mem, _mem):
|
|
rxtype = _mem.rxcodeflag
|
|
txtype = _mem.txcodeflag
|
|
rx_tmode = TMODES[rxtype]
|
|
tx_tmode = TMODES[txtype]
|
|
|
|
rx_tone = tx_tone = None
|
|
|
|
if tx_tmode == "Tone":
|
|
if _mem.txcode < len(CTCSS_TONES):
|
|
tx_tone = CTCSS_TONES[_mem.txcode]
|
|
else:
|
|
tx_tone = 0
|
|
tx_tmode = ""
|
|
elif tx_tmode == "DTCS":
|
|
if _mem.txcode < len(DTCS_CODES):
|
|
tx_tone = DTCS_CODES[_mem.txcode]
|
|
else:
|
|
tx_tone = 0
|
|
tx_tmode = ""
|
|
|
|
if rx_tmode == "Tone":
|
|
if _mem.rxcode < len(CTCSS_TONES):
|
|
rx_tone = CTCSS_TONES[_mem.rxcode]
|
|
else:
|
|
rx_tone = 0
|
|
rx_tmode = ""
|
|
elif rx_tmode == "DTCS":
|
|
if _mem.rxcode < len(DTCS_CODES):
|
|
rx_tone = DTCS_CODES[_mem.rxcode]
|
|
else:
|
|
rx_tone = 0
|
|
rx_tmode = ""
|
|
|
|
tx_pol = txtype == 0x03 and "R" or "N"
|
|
rx_pol = rxtype == 0x03 and "R" or "N"
|
|
|
|
chirp_common.split_tone_decode(mem, (tx_tmode, tx_tone, tx_pol),
|
|
(rx_tmode, rx_tone, rx_pol))
|
|
|
|
# Extract a high-level memory object from the low-level memory map
|
|
# This is called to populate a memory in the UI
|
|
def get_memory(self, number2):
|
|
|
|
mem = chirp_common.Memory()
|
|
|
|
if isinstance(number2, str):
|
|
number = SPECIALS[number2]
|
|
mem.extd_number = number2
|
|
else:
|
|
number = number2 - 1
|
|
|
|
mem.number = number + 1
|
|
|
|
_mem = self._memobj.channel[number]
|
|
|
|
tmpcomment = ""
|
|
|
|
is_empty = False
|
|
# We'll consider any blank (i.e. 0 MHz frequency) to be empty
|
|
if (_mem.freq == 0xffffffff) or (_mem.freq == 0):
|
|
is_empty = True
|
|
|
|
tmpscn = SCANLIST_LIST[0]
|
|
|
|
# We'll also look at the channel attributes if a memory has them
|
|
if number < 200:
|
|
_mem3 = self._memobj.channel_attributes[number]
|
|
# free memory bit
|
|
if _mem3.is_free > 0:
|
|
is_empty = True
|
|
# scanlists
|
|
if _mem3.is_scanlist1 > 0 and _mem3.is_scanlist2 > 0:
|
|
tmpscn = SCANLIST_LIST[3] # "1+2"
|
|
elif _mem3.is_scanlist1 > 0:
|
|
tmpscn = SCANLIST_LIST[1] # "1"
|
|
elif _mem3.is_scanlist2 > 0:
|
|
tmpscn = SCANLIST_LIST[2] # "2"
|
|
|
|
if is_empty:
|
|
mem.empty = True
|
|
# set some sane defaults:
|
|
mem.power = UVK5_POWER_LEVELS[2]
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
rs = RadioSetting(
|
|
"bandwidth", "Bandwidth",
|
|
RadioSettingValueList(BANDWIDTH_LIST, BANDWIDTH_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting(
|
|
"bclo", "BCLO",
|
|
RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
rs = RadioSetting(
|
|
"frev", "FreqRev",
|
|
RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
rs = RadioSetting(
|
|
"pttid", "PTTID",
|
|
RadioSettingValueList(PTTID_LIST, PTTID_LIST[0]))
|
|
mem.extra.append(rs)
|
|
rs = RadioSetting(
|
|
"dtmfdecode", _("DTMF decode"),
|
|
RadioSettingValueBoolean(False))
|
|
mem.extra.append(rs)
|
|
rs = RadioSetting(
|
|
"scrambler", _("Scrambler"),
|
|
RadioSettingValueList(SCRAMBLER_LIST, SCRAMBLER_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting(
|
|
"scanlists", _("Scanlists"),
|
|
RadioSettingValueList(SCANLIST_LIST, SCANLIST_LIST[0]))
|
|
mem.extra.append(rs)
|
|
|
|
# actually the step and duplex are overwritten by chirp based on
|
|
# bandplan. they are here to document sane defaults for IARU r1
|
|
# mem.tuning_step = 25.0
|
|
# mem.duplex = ""
|
|
|
|
return mem
|
|
|
|
if number > 199:
|
|
mem.immutable = ["name", "scanlists"]
|
|
else:
|
|
_mem2 = self._memobj.channelname[number]
|
|
for char in _mem2.name:
|
|
if str(char) == "\xFF" or str(char) == "\x00":
|
|
break
|
|
mem.name += str(char)
|
|
mem.name = mem.name.rstrip()
|
|
|
|
# Convert your low-level frequency to Hertz
|
|
mem.freq = int(_mem.freq)*10
|
|
mem.offset = int(_mem.offset)*10
|
|
|
|
if (mem.offset == 0):
|
|
mem.duplex = ''
|
|
else:
|
|
if _mem.shift == FLAGS1_OFFSET_MINUS:
|
|
if _mem.freq == _mem.offset:
|
|
# fake tx disable by setting tx to 0 MHz
|
|
mem.duplex = 'off'
|
|
mem.offset = 0
|
|
else:
|
|
mem.duplex = '-'
|
|
elif _mem.shift == FLAGS1_OFFSET_PLUS:
|
|
mem.duplex = '+'
|
|
else:
|
|
mem.duplex = ''
|
|
|
|
# tone data
|
|
self._get_tone(mem, _mem)
|
|
|
|
# mode
|
|
if _mem.enable_extramodes > 0:
|
|
if _mem.enable_am > 0:
|
|
mem.mode = "CW"
|
|
else:
|
|
mem.mode = "USB"
|
|
else:
|
|
if _mem.enable_am > 0:
|
|
mem.mode = "AM"
|
|
else:
|
|
mem.mode = "FM"
|
|
|
|
|
|
# tuning step
|
|
tstep = _mem.step & 0xF
|
|
if tstep < len(STEPS):
|
|
mem.tuning_step = STEPS[tstep]
|
|
else:
|
|
mem.tuning_step = 0.02
|
|
|
|
# power
|
|
if _mem.txpower == POWER_HIGH:
|
|
mem.power = UVK5_POWER_LEVELS[2]
|
|
elif _mem.txpower == POWER_MEDIUM:
|
|
mem.power = UVK5_POWER_LEVELS[1]
|
|
else:
|
|
mem.power = UVK5_POWER_LEVELS[0]
|
|
|
|
# We'll consider any blank (i.e. 0 MHz frequency) to be empty
|
|
if (_mem.freq == 0xffffffff) or (_mem.freq == 0):
|
|
mem.empty = True
|
|
else:
|
|
mem.empty = False
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
# bandwidth
|
|
bwidth = _mem.bandwidth
|
|
rs = RadioSetting("bandwidth", "Bandwidth", RadioSettingValueList(
|
|
BANDWIDTH_LIST, BANDWIDTH_LIST[bwidth]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "bandwidth:"+BANDWIDTH_LIST[bwidth]+" "
|
|
|
|
# BCLO
|
|
is_bclo = bool(_mem.bclo > 0)
|
|
rs = RadioSetting("bclo", "BCLO", RadioSettingValueBoolean(is_bclo))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "BCLO:"+(is_bclo and "ON" or "off")+" "
|
|
|
|
# Frequency reverse - whatever that means, don't see it in the manual
|
|
is_frev = bool(_mem.freq_reverse > 0)
|
|
rs = RadioSetting("frev", "FreqRev", RadioSettingValueBoolean(is_frev))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "FreqReverse:"+(is_frev and "ON" or "off")+" "
|
|
|
|
# PTTID
|
|
pttid = _mem.dtmf_pttid
|
|
rs = RadioSetting("pttid", "PTTID", RadioSettingValueList(
|
|
PTTID_LIST, PTTID_LIST[pttid]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "PTTid:"+PTTID_LIST[pttid]+" "
|
|
|
|
# DTMF DECODE
|
|
is_dtmf = bool(_mem.dtmf_decode > 0)
|
|
rs = RadioSetting("dtmfdecode", _("DTMF decode"),
|
|
RadioSettingValueBoolean(is_dtmf))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "DTMFdecode:"+(is_dtmf and "ON" or "off")+" "
|
|
|
|
# Scrambler
|
|
if _mem.scrambler & 0x0f < len(SCRAMBLER_LIST):
|
|
enc = _mem.scrambler & 0x0f
|
|
else:
|
|
enc = 0
|
|
|
|
rs = RadioSetting("scrambler", _("Scrambler"), RadioSettingValueList(
|
|
SCRAMBLER_LIST, SCRAMBLER_LIST[enc]))
|
|
mem.extra.append(rs)
|
|
tmpcomment += "Scrambler:"+SCRAMBLER_LIST[enc]+" "
|
|
|
|
rs = RadioSetting("scanlists", _("Scanlists"), RadioSettingValueList(
|
|
SCANLIST_LIST, tmpscn))
|
|
mem.extra.append(rs)
|
|
|
|
return mem
|
|
|
|
def set_settings(self, settings):
|
|
_mem = self._memobj
|
|
|
|
s1 = False
|
|
s2 = False
|
|
s3 = False
|
|
|
|
sv1 = False
|
|
sv2 = False
|
|
sv3 = False
|
|
sv4 = False
|
|
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
|
|
# basic settings
|
|
|
|
# call channel
|
|
if element.get_name() == "call_channel":
|
|
_mem.call_channel = int(element.value)-1
|
|
|
|
# squelch
|
|
if element.get_name() == "squelch_a":
|
|
_mem.squelch_a = int(element.value)
|
|
|
|
if element.get_name() == "squelch_b":
|
|
_mem.squelch_b = int(element.value)
|
|
|
|
# TOT
|
|
if element.get_name() == "max_talk_time":
|
|
_mem.max_talk_time = TALKTIME_LIST.index(str(element.value))
|
|
|
|
# Beacon
|
|
if element.get_name() == "beacon":
|
|
_mem.beacon = BEACON_LIST.index(str(element.value))
|
|
|
|
|
|
# NOAA autoscan
|
|
# if element.get_name() == "noaa_autoscan":
|
|
# _mem.noaa_autoscan = element.value and 1 or 0
|
|
|
|
# VOX switch
|
|
if element.get_name() == "vox_switch":
|
|
_mem.vox_switch = element.value and 1 or 0
|
|
|
|
# vox level
|
|
if element.get_name() == "vox_level":
|
|
_mem.vox_level = int(element.value)-1
|
|
|
|
# mic gain
|
|
if element.get_name() == "mic_gain":
|
|
_mem.mic_gain = MICGAIN_LIST.index(str(element.value))
|
|
############################################### 0xF47 #####################################################################
|
|
# MicBar
|
|
if element.get_name() == "micbar":
|
|
tmp_micbar = element.value and 0x10 or 0x00 #tmp_micbar = element.value and 0x10 or 0x00
|
|
s1 = True
|
|
|
|
if element.get_name() == "bl_mode":
|
|
tmp_bl_mode = element.value and 0x20 or 0x00 #tmp_bl_mode = element.value and 0x20 or 0x00
|
|
s2 = True
|
|
|
|
if element.get_name() == "tx_enable":
|
|
tmp_tx_enable = element.value and 0x01 or 0x00
|
|
s3 = True
|
|
#tmp_tx_enable = 0x01
|
|
|
|
if (s1 and s2)and s3:
|
|
_mem.micbar = tmp_micbar | tmp_bl_mode | tmp_tx_enable
|
|
_mem.bl_mode = tmp_micbar | tmp_bl_mode | tmp_tx_enable
|
|
_mem.tx_enable = tmp_micbar |tmp_bl_mode | tmp_tx_enable
|
|
|
|
######################################### 0xF4F ###########################################################################
|
|
# Single vfo BIT 1
|
|
if element.get_name() == "single_vfo":
|
|
tmp_single_vfo = element.value and 0x02 or 0x00
|
|
sv1 = True
|
|
|
|
# Signal Meter BIT 2
|
|
if element.get_name() == "signal_meter":
|
|
tmp_signal_meter = element.value and 0x04 or 0x00 #_mem.signal_meter = element.value and 0x04 or 0x00
|
|
sv2 = True
|
|
|
|
# Satcom BIT 3
|
|
if element.get_name() == "satcom":
|
|
tmp_satcom = element.value and 0x08 or 0x00
|
|
sv3 = True
|
|
|
|
# Upconv BIT 4 e 5
|
|
if element.get_name() == "upconv":
|
|
tmp_upconv = (UPCONV_LIST.index(str(element.value)) << 4) #il risultato viene spostat di 4 posizioni a sinistra
|
|
sv4 = True
|
|
|
|
|
|
### Sommo in OR tutti BIT
|
|
if ((sv1 and sv2) and sv3 ) and sv4:
|
|
_mem.single_vfo = tmp_single_vfo | tmp_signal_meter | tmp_satcom | tmp_upconv
|
|
_mem.signal_meter = tmp_single_vfo | tmp_signal_meter | tmp_satcom | tmp_upconv
|
|
_mem.satcom = tmp_single_vfo | tmp_signal_meter | tmp_satcom | tmp_upconv
|
|
_mem.upconv = tmp_single_vfo | tmp_signal_meter | tmp_satcom | tmp_upconv
|
|
|
|
####################################################################################################################
|
|
# Channel display mode
|
|
if element.get_name() == "channel_display_mode":
|
|
_mem.channel_display_mode = CHANNELDISP_LIST.index(
|
|
str(element.value))
|
|
|
|
# Crossband receiving/transmitting
|
|
if element.get_name() == "crossband":
|
|
_mem.crossband = CROSSBAND_LIST.index(str(element.value))
|
|
|
|
# Battery Save
|
|
if element.get_name() == "battery_save":
|
|
_mem.battery_save = BATSAVE_LIST.index(str(element.value))
|
|
|
|
# Compander
|
|
if element.get_name() == "compander":
|
|
_mem.compander = (COMPANDER_LIST.index(str(element.value)) << 4) | 0x03
|
|
|
|
# Dual Watch
|
|
if element.get_name() == "dualwatch":
|
|
_mem.dual_watch = DUALWATCH_LIST.index(str(element.value))
|
|
|
|
# Band TX
|
|
if element.get_name() == "bands_tx":
|
|
_mem.bands_tx = BANDS_TX_LIST.index(str(element.value))
|
|
|
|
# Backlight auto mode
|
|
if element.get_name() == "backlight_auto_mode":
|
|
_mem.backlight_auto_mode = \
|
|
BACKLIGHT_LIST.index(str(element.value))
|
|
|
|
# Tail tone elimination
|
|
if element.get_name() == "tail_note_elimination":
|
|
_mem.tail_note_elimination = element.value and 1 or 0
|
|
|
|
# VFO Open
|
|
# if element.get_name() == "vfo_open":
|
|
# _mem.vfo_open = element.value and 1 or 0
|
|
|
|
# Beep control
|
|
if element.get_name() == "beep_control":
|
|
_mem.beep_control = element.value and 1 or 0
|
|
|
|
# Scan resume mode
|
|
if element.get_name() == "scan_resume_mode":
|
|
_mem.scan_resume_mode = SCANRESUME_LIST.index(
|
|
str(element.value))
|
|
|
|
# Keypad lock
|
|
if element.get_name() == "key_lock":
|
|
_mem.key_lock = element.value and 1 or 0
|
|
|
|
# Auto keypad lock
|
|
if element.get_name() == "auto_keypad_lock":
|
|
_mem.auto_keypad_lock = element.value and 1 or 0
|
|
|
|
# Power on display mode
|
|
if element.get_name() == "welcome_mode":
|
|
_mem.power_on_dispmode = WELCOME_LIST.index(str(element.value))
|
|
|
|
# Keypad Tone
|
|
# if element.get_name() == "keypad_tone":
|
|
# _mem.keypad_tone = KEYPADTONE_LIST.index(str(element.value))
|
|
|
|
# Language
|
|
# if element.get_name() == "language":
|
|
# _mem.language = LANGUAGE_LIST.index(str(element.value))
|
|
|
|
# Alarm mode
|
|
# if element.get_name() == "alarm_mode":
|
|
# _mem.alarm_mode = ALARMMODE_LIST.index(str(element.value))
|
|
|
|
# Reminding of end of talk
|
|
if element.get_name() == "reminding_of_end_talk":
|
|
_mem.reminding_of_end_talk = REMENDOFTALK_LIST.index(
|
|
str(element.value))
|
|
|
|
# Repeater tail tone elimination
|
|
if element.get_name() == "repeater_tail_elimination":
|
|
_mem.repeater_tail_elimination = RTE_LIST.index(
|
|
str(element.value))
|
|
|
|
|
|
|
|
# Logo string 1
|
|
if element.get_name() == "logo1":
|
|
b = str(element.value).rstrip("\x20\xff\x00")+"\x00"*15
|
|
_mem.logo_line1 = b[0:15]+"\x00"
|
|
|
|
# Logo string 2
|
|
if element.get_name() == "logo2":
|
|
b = str(element.value).rstrip("\x20\xff\x00")+"\x00"*15
|
|
_mem.logo_line2 = b[0:15]+"\x00"
|
|
|
|
# QRZ label
|
|
if element.get_name() == "qrz_label":
|
|
b = str(element.value).rstrip("\x20\xff\x00")+"\x00"*8
|
|
_mem.qrz_label = b[0:8]
|
|
|
|
# unlock settings
|
|
|
|
# FLOCK
|
|
if element.get_name() == "flock":
|
|
_mem.lock.flock = FLOCK_LIST.index(str(element.value))
|
|
|
|
# 350TX
|
|
# if element.get_name() == "tx350":
|
|
# _mem.lock.tx350 = element.value and 1 or 0
|
|
|
|
# 200TX
|
|
# if element.get_name() == "tx200":
|
|
# _mem.lock.tx200 = element.value and 1 or 0
|
|
|
|
# 500TX
|
|
# if element.get_name() == "tx500":
|
|
# _mem.lock.tx500 = element.value and 1 or 0
|
|
|
|
# 350EN
|
|
# if element.get_name() == "en350":
|
|
# _mem.lock.en350 = element.value and 1 or 0
|
|
|
|
# SCREN
|
|
# if element.get_name() == "enscramble":
|
|
# _mem.lock.enscramble = element.value and 1 or 0
|
|
|
|
# KILLED
|
|
# if element.get_name() == "killed":
|
|
# _mem.lock.killed = element.value and 1 or 0
|
|
|
|
# fm radio
|
|
for i in range(1, 21):
|
|
freqname = "FM_" + str(i)
|
|
if element.get_name() == freqname:
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0xffff
|
|
|
|
if val2 < FMMIN*10 or val2 > FMMAX*10:
|
|
val2 = 0xffff
|
|
# raise errors.InvalidValueError(
|
|
# "FM radio frequency should be a value "
|
|
# "in the range %.1f - %.1f" % (FMMIN , FMMAX))
|
|
_mem.fmfreq[i-1] = val2
|
|
|
|
# dtmf settings
|
|
if element.get_name() == "dtmf_side_tone":
|
|
_mem.dtmf_settings.side_tone = \
|
|
element.value and 1 or 0
|
|
|
|
if element.get_name() == "dtmf_separate_code":
|
|
_mem.dtmf_settings.separate_code = str(element.value)
|
|
|
|
if element.get_name() == "dtmf_group_call_code":
|
|
_mem.dtmf_settings.group_call_code = element.value
|
|
|
|
if element.get_name() == "dtmf_decode_response":
|
|
_mem.dtmf_settings.decode_response = \
|
|
DTMF_DECODE_RESPONSE_LIST.index(str(element.value))
|
|
|
|
if element.get_name() == "dtmf_auto_reset_time":
|
|
_mem.dtmf_settings.auto_reset_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_preload_time":
|
|
_mem.dtmf_settings.preload_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_first_code_persist_time":
|
|
_mem.dtmf_settings.first_code_persist_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_hash_persist_time":
|
|
_mem.dtmf_settings.hash_persist_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_code_persist_time":
|
|
_mem.dtmf_settings.code_persist_time = \
|
|
int(int(element.value)/10)
|
|
|
|
if element.get_name() == "dtmf_code_interval_time":
|
|
_mem.dtmf_settings.code_interval_time = \
|
|
int(int(element.value)/10)
|
|
|
|
# if element.get_name() == "dtmf_permit_remote_kill":
|
|
# _mem.dtmf_settings.permit_remote_kill = \
|
|
# element.value and 1 or 0
|
|
|
|
if element.get_name() == "dtmf_dtmf_local_code":
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmf_settings_numbers.dtmf_local_code = k[0:8]
|
|
|
|
if element.get_name() == "dtmf_dtmf_up_code":
|
|
k = str(element.value).strip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmf_settings_numbers.dtmf_up_code = k[0:8]
|
|
|
|
if element.get_name() == "dtmf_dtmf_down_code":
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmf_settings_numbers.dtmf_down_code = k[0:8]
|
|
|
|
# if element.get_name() == "dtmf_kill_code":
|
|
# k = str(element.value).strip("\x20\xff\x00") + "\x00"*5
|
|
# _mem.dtmf_settings_numbers.kill_code = k[0:5]
|
|
|
|
#if element.get_name() == "dtmf_revive_code":
|
|
# k = str(element.value).strip("\x20\xff\x00") + "\x00"*5
|
|
# _mem.dtmf_settings_numbers.revive_code = k[0:5]
|
|
|
|
# dtmf contacts
|
|
for i in range(1, 17):
|
|
varname = "DTMF_" + str(i)
|
|
if element.get_name() == varname:
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmfcontact[i-1].name = k[0:8]
|
|
|
|
varnumname = "DTMFNUM_" + str(i)
|
|
if element.get_name() == varnumname:
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\xff"*3
|
|
_mem.dtmfcontact[i-1].number = k[0:3]
|
|
|
|
# scanlist stuff
|
|
if element.get_name() == "scanlist_default":
|
|
val = (int(element.value) == 2) and 1 or 0
|
|
_mem.scanlist_default = val
|
|
|
|
if element.get_name() == "scanlist1_priority_scan":
|
|
_mem.scanlist1_priority_scan = \
|
|
element.value and 1 or 0
|
|
|
|
if element.get_name() == "scanlist2_priority_scan":
|
|
_mem.scanlist2_priority_scan = \
|
|
element.value and 1 or 0
|
|
|
|
if element.get_name() == "scanlist1_priority_ch1" or \
|
|
element.get_name() == "scanlist1_priority_ch2" or \
|
|
element.get_name() == "scanlist2_priority_ch1" or \
|
|
element.get_name() == "scanlist2_priority_ch2":
|
|
|
|
val = int(element.value)
|
|
|
|
if val > 200 or val < 1:
|
|
val = 0xff
|
|
else:
|
|
val -= 1
|
|
|
|
if element.get_name() == "scanlist1_priority_ch1":
|
|
_mem.scanlist1_priority_ch1 = val
|
|
if element.get_name() == "scanlist1_priority_ch2":
|
|
_mem.scanlist1_priority_ch2 = val
|
|
if element.get_name() == "scanlist2_priority_ch1":
|
|
_mem.scanlist2_priority_ch1 = val
|
|
if element.get_name() == "scanlist2_priority_ch2":
|
|
_mem.scanlist2_priority_ch2 = val
|
|
|
|
if element.get_name() == "key1_shortpress_action":
|
|
_mem.key1_shortpress_action = KEYACTIONS_LIST.index(
|
|
str(element.value))
|
|
|
|
if element.get_name() == "key1_longpress_action":
|
|
_mem.key1_longpress_action = KEYACTIONS_LIST.index(
|
|
str(element.value))
|
|
|
|
if element.get_name() == "key2_shortpress_action":
|
|
_mem.key2_shortpress_action = KEYACTIONS_LIST.index(
|
|
str(element.value))
|
|
|
|
if element.get_name() == "key2_longpress_action":
|
|
_mem.key2_longpress_action = KEYACTIONS_LIST.index(
|
|
str(element.value))
|
|
|
|
if element.get_name() == "nolimits":
|
|
LOG.warning("User expanded band limits")
|
|
self._expanded_limits = bool(element.value)
|
|
|
|
def get_settings(self):
|
|
_mem = self._memobj
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
keya = RadioSettingGroup("keya", "Programmable keys")
|
|
dtmf = RadioSettingGroup("dtmf", "DTMF/Selcall Settings")
|
|
dtmfc = RadioSettingGroup("dtmfc", "DTMF Contacts")
|
|
scanl = RadioSettingGroup("scn", "Scan Lists")
|
|
unlock = RadioSettingGroup("unlock", "Unlock Settings")
|
|
fmradio = RadioSettingGroup("fmradio", _("FM Radio"))
|
|
|
|
roinfo = RadioSettingGroup("roinfo", _("Driver information"))
|
|
|
|
top = RadioSettings(
|
|
basic, keya, dtmf, dtmfc, scanl, unlock, fmradio, roinfo)
|
|
|
|
# Programmable keys
|
|
tmpval = int(_mem.key1_shortpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key1_shortpress_action", "Side key 1 short press",
|
|
RadioSettingValueList(
|
|
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
tmpval = int(_mem.key1_longpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key1_longpress_action", "Side key 1 long press",
|
|
RadioSettingValueList(
|
|
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
tmpval = int(_mem.key2_shortpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key2_shortpress_action", "Side key 2 short press",
|
|
RadioSettingValueList(
|
|
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
tmpval = int(_mem.key2_longpress_action)
|
|
if tmpval >= len(KEYACTIONS_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("key2_longpress_action", "Side key 2 long press",
|
|
RadioSettingValueList(
|
|
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
|
|
keya.append(rs)
|
|
|
|
# DTMF settings
|
|
tmppr = bool(_mem.dtmf_settings.side_tone > 0)
|
|
rs = RadioSetting(
|
|
"dtmf_side_tone",
|
|
"DTMF/SELCALL Sidetone",
|
|
RadioSettingValueBoolean(tmppr))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings.separate_code)
|
|
if tmpval not in DTMF_CODE_CHARS:
|
|
tmpval = '*'
|
|
val = RadioSettingValueString(1, 1, tmpval)
|
|
val.set_charset(DTMF_CODE_CHARS)
|
|
rs = RadioSetting("dtmf_separate_code", "Separate Code", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings.group_call_code)
|
|
if tmpval not in DTMF_CODE_CHARS:
|
|
tmpval = '#'
|
|
val = RadioSettingValueString(1, 1, tmpval)
|
|
val.set_charset(DTMF_CODE_CHARS)
|
|
rs = RadioSetting("dtmf_group_call_code", "Group Call Code", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = _mem.dtmf_settings.decode_response
|
|
if tmpval >= len(DTMF_DECODE_RESPONSE_LIST):
|
|
tmpval = 0
|
|
rs = RadioSetting("dtmf_decode_response", "Decode Response",
|
|
RadioSettingValueList(
|
|
DTMF_DECODE_RESPONSE_LIST,
|
|
DTMF_DECODE_RESPONSE_LIST[tmpval]))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = _mem.dtmf_settings.auto_reset_time
|
|
if tmpval > 60 or tmpval < 5:
|
|
tmpval = 5
|
|
rs = RadioSetting("dtmf_auto_reset_time",
|
|
"Auto reset time (s)",
|
|
RadioSettingValueInteger(5, 60, tmpval))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.preload_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_preload_time",
|
|
"Pre-load time (ms)",
|
|
RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.first_code_persist_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_first_code_persist_time",
|
|
"First code persist time (ms)",
|
|
RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.hash_persist_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_hash_persist_time",
|
|
"#/* persist time (ms)",
|
|
RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.code_persist_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_code_persist_time",
|
|
"Code persist time (ms)",
|
|
RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
tmpval = int(_mem.dtmf_settings.code_interval_time)
|
|
if tmpval > 100 or tmpval < 3:
|
|
tmpval = 30
|
|
tmpval *= 10
|
|
rs = RadioSetting("dtmf_code_interval_time",
|
|
"Code interval time (ms)",
|
|
RadioSettingValueInteger(30, 1000, tmpval, 10))
|
|
dtmf.append(rs)
|
|
|
|
# tmpval = bool(_mem.dtmf_settings.permit_remote_kill > 0)
|
|
# rs = RadioSetting(
|
|
# "dtmf_permit_remote_kill",
|
|
# "Permit remote kill",
|
|
# RadioSettingValueBoolean(tmpval))
|
|
# dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings_numbers.dtmf_local_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_ID:
|
|
continue
|
|
else:
|
|
tmpval = "103"
|
|
break
|
|
val = RadioSettingValueString(1, 8, tmpval)
|
|
val.set_charset(DTMF_CHARS_ID)
|
|
rs = RadioSetting("dtmf_dtmf_local_code",
|
|
"Own ID (1-8 chars 0-9 ABCD)", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings_numbers.dtmf_up_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_UPDOWN or i == "":
|
|
continue
|
|
else:
|
|
tmpval = "123"
|
|
break
|
|
val = RadioSettingValueString(1, 8, tmpval)
|
|
val.set_charset(DTMF_CHARS_UPDOWN)
|
|
rs = RadioSetting("dtmf_dtmf_up_code",
|
|
"Up code (1-8 chars 0-9 ABCD*#)", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings_numbers.dtmf_down_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_UPDOWN:
|
|
continue
|
|
else:
|
|
tmpval = "456"
|
|
break
|
|
val = RadioSettingValueString(1, 8, tmpval)
|
|
val.set_charset(DTMF_CHARS_UPDOWN)
|
|
rs = RadioSetting("dtmf_dtmf_down_code",
|
|
"Down code (1-8 chars 0-9 ABCD*#)", val)
|
|
dtmf.append(rs)
|
|
|
|
tmpval = str(_mem.dtmf_settings_numbers.kill_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
# for i in tmpval:
|
|
# if i in DTMF_CHARS_KILL:
|
|
# continue
|
|
# else:
|
|
# tmpval = "77777"
|
|
# break
|
|
# if not len(tmpval) == 5:
|
|
# tmpval = "77777"
|
|
# val = RadioSettingValueString(5, 5, tmpval)
|
|
# val.set_charset(DTMF_CHARS_KILL)
|
|
# rs = RadioSetting("dtmf_kill_code",
|
|
# "Kill code (5 chars 0-9 ABCD)", val)
|
|
# dtmf.append(rs)
|
|
|
|
# tmpval = str(_mem.dtmf_settings_numbers.revive_code).upper().strip(
|
|
# "\x00\xff\x20")
|
|
#for i in tmpval:
|
|
# if i in DTMF_CHARS_KILL:
|
|
# continue
|
|
# else:
|
|
# tmpval = "88888"
|
|
# break
|
|
#if not len(tmpval) == 5:
|
|
# tmpval = "88888"
|
|
#val = RadioSettingValueString(5, 5, tmpval)
|
|
#val.set_charset(DTMF_CHARS_KILL)
|
|
#rs = RadioSetting("dtmf_revive_code",
|
|
# "Revive code (5 chars 0-9 ABCD)", val)
|
|
#dtmf.append(rs)
|
|
|
|
val = RadioSettingValueString(0, 80,
|
|
"All DTMF Contacts are 3 codes "
|
|
"(valid: 0-9 * # ABCD), "
|
|
"or an empty string")
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("dtmf_descr1", "DTMF Contacts", val)
|
|
dtmfc.append(rs)
|
|
|
|
for i in range(1, 17):
|
|
varname = "DTMF_"+str(i)
|
|
varnumname = "DTMFNUM_"+str(i)
|
|
vardescr = "DTMF Contact "+str(i)+" name"
|
|
varinumdescr = "DTMF Contact "+str(i)+" number"
|
|
|
|
cntn = str(_mem.dtmfcontact[i-1].name).strip("\x20\x00\xff")
|
|
cntnum = str(_mem.dtmfcontact[i-1].number).strip("\x20\x00\xff")
|
|
|
|
val = RadioSettingValueString(0, 8, cntn)
|
|
rs = RadioSetting(varname, vardescr, val)
|
|
dtmfc.append(rs)
|
|
|
|
val = RadioSettingValueString(0, 3, cntnum)
|
|
val.set_charset(DTMF_CHARS)
|
|
rs = RadioSetting(varnumname, varinumdescr, val)
|
|
dtmfc.append(rs)
|
|
|
|
# scanlists
|
|
if _mem.scanlist_default == 1:
|
|
tmpsc = 2
|
|
else:
|
|
tmpsc = 1
|
|
rs = RadioSetting("scanlist_default",
|
|
"Default scanlist",
|
|
RadioSettingValueInteger(1, 2, tmpsc))
|
|
scanl.append(rs)
|
|
|
|
tmppr = bool((_mem.scanlist1_priority_scan & 1) > 0)
|
|
rs = RadioSetting(
|
|
"scanlist1_priority_scan",
|
|
"Scanlist 1 priority channel scan",
|
|
RadioSettingValueBoolean(tmppr))
|
|
scanl.append(rs)
|
|
|
|
tmpch = _mem.scanlist1_priority_ch1 + 1
|
|
if tmpch > 200:
|
|
tmpch = 0
|
|
rs = RadioSetting("scanlist1_priority_ch1",
|
|
"Scanlist 1 priority channel 1 (0 - off)",
|
|
RadioSettingValueInteger(0, 200, tmpch))
|
|
scanl.append(rs)
|
|
|
|
tmpch = _mem.scanlist1_priority_ch2 + 1
|
|
if tmpch > 200:
|
|
tmpch = 0
|
|
rs = RadioSetting("scanlist1_priority_ch2",
|
|
"Scanlist 1 priority channel 2 (0 - off)",
|
|
RadioSettingValueInteger(0, 200, tmpch))
|
|
scanl.append(rs)
|
|
|
|
tmppr = bool((_mem.scanlist2_priority_scan & 1) > 0)
|
|
rs = RadioSetting(
|
|
"scanlist2_priority_scan",
|
|
"Scanlist 2 priority channel scan",
|
|
RadioSettingValueBoolean(tmppr))
|
|
scanl.append(rs)
|
|
|
|
tmpch = _mem.scanlist2_priority_ch1 + 1
|
|
if tmpch > 200:
|
|
tmpch = 0
|
|
rs = RadioSetting("scanlist2_priority_ch1",
|
|
"Scanlist 2 priority channel 1 (0 - off)",
|
|
RadioSettingValueInteger(0, 200, tmpch))
|
|
scanl.append(rs)
|
|
|
|
tmpch = _mem.scanlist2_priority_ch2 + 1
|
|
if tmpch > 200:
|
|
tmpch = 0
|
|
rs = RadioSetting("scanlist2_priority_ch2",
|
|
"Scanlist 2 priority channel 2 (0 - off)",
|
|
RadioSettingValueInteger(0, 200, tmpch))
|
|
scanl.append(rs)
|
|
|
|
# basic settings
|
|
|
|
# squelch
|
|
tmpsq = _mem.squelch_a
|
|
if tmpsq > 9:
|
|
tmpsq = 1
|
|
rs = RadioSetting("squelch_a", "Squelch A",
|
|
RadioSettingValueInteger(0, 9, tmpsq))
|
|
basic.append(rs)
|
|
|
|
tmpsq = _mem.squelch_b
|
|
if tmpsq > 9:
|
|
tmpsq = 1
|
|
rs = RadioSetting("squelch_b", "Squelch B",
|
|
RadioSettingValueInteger(0, 9, tmpsq))
|
|
basic.append(rs)
|
|
|
|
# TOT
|
|
tmptot = _mem.max_talk_time
|
|
if tmptot >= len(TALKTIME_LIST):
|
|
tmptot = TALKTIME_LIST.index("2min")
|
|
rs = RadioSetting(
|
|
"max_talk_time",
|
|
"Max talk time (Tx TOT)",
|
|
RadioSettingValueList(
|
|
TALKTIME_LIST,
|
|
TALKTIME_LIST[tmptot]))
|
|
basic.append(rs)
|
|
|
|
# Channel display mode
|
|
tmpchdispmode = _mem.channel_display_mode
|
|
if tmpchdispmode >= len(CHANNELDISP_LIST):
|
|
tmpchdispmode = 0
|
|
rs = RadioSetting(
|
|
"channel_display_mode",
|
|
"Channel Display mode",
|
|
RadioSettingValueList(
|
|
CHANNELDISP_LIST,
|
|
CHANNELDISP_LIST[tmpchdispmode]))
|
|
basic.append(rs)
|
|
|
|
# Backlight auto mode
|
|
tmpback = _mem.backlight_auto_mode
|
|
if tmpback >= len(BACKLIGHT_LIST):
|
|
tmpback = 0
|
|
rs = RadioSetting("backlight_auto_mode",
|
|
"BackLightTtime",
|
|
RadioSettingValueList(
|
|
BACKLIGHT_LIST,
|
|
BACKLIGHT_LIST[tmpback]))
|
|
basic.append(rs)
|
|
|
|
# BLMode
|
|
rs = RadioSetting(
|
|
"bl_mode",
|
|
"BLmode (TX/RX)", RadioSettingValueBoolean(bool((_mem.bl_mode & 0x20) > 0)))
|
|
basic.append(rs)
|
|
|
|
# TX Enable
|
|
rs = RadioSetting(
|
|
"tx_enable",
|
|
"TX Enable", RadioSettingValueBoolean(bool((_mem.tx_enable & 0x01) > 0)))
|
|
unlock.append(rs)
|
|
|
|
# Beep control
|
|
rs = RadioSetting(
|
|
"beep_control",
|
|
"Beep control",
|
|
RadioSettingValueBoolean(bool(_mem.beep_control > 0)))
|
|
basic.append(rs)
|
|
|
|
# Scan resume mode
|
|
tmpscanres = _mem.scan_resume_mode
|
|
if tmpscanres >= len(SCANRESUME_LIST):
|
|
tmpscanres = 0
|
|
rs = RadioSetting(
|
|
"scan_resume_mode",
|
|
"Scan resume mode (Sc REV)",
|
|
RadioSettingValueList(
|
|
SCANRESUME_LIST,
|
|
SCANRESUME_LIST[tmpscanres]))
|
|
basic.append(rs)
|
|
|
|
# Keypad locked
|
|
rs = RadioSetting(
|
|
"key_lock",
|
|
"Keypad Lock",
|
|
RadioSettingValueBoolean(bool(_mem.key_lock > 0)))
|
|
basic.append(rs)
|
|
|
|
# Auto keypad lock
|
|
rs = RadioSetting(
|
|
"auto_keypad_lock",
|
|
"Auto keypad lock",
|
|
RadioSettingValueBoolean(bool(_mem.auto_keypad_lock > 0)))
|
|
basic.append(rs)
|
|
|
|
# Tail tone elimination
|
|
rs = RadioSetting(
|
|
"tail_note_elimination",
|
|
"Tail tone elimination",
|
|
RadioSettingValueBoolean(
|
|
bool(_mem.tail_note_elimination > 0)))
|
|
basic.append(rs)
|
|
|
|
# Repeater tail tone elimination
|
|
tmprte = _mem.repeater_tail_elimination
|
|
if tmprte >= len(RTE_LIST):
|
|
tmprte = 0
|
|
rs = RadioSetting(
|
|
"repeater_tail_elimination",
|
|
"Repeater Tail Tone Elimination",
|
|
RadioSettingValueList(RTE_LIST, RTE_LIST[tmprte]))
|
|
basic.append(rs)
|
|
|
|
# Mic gain
|
|
tmpmicgain = _mem.mic_gain
|
|
if tmpmicgain >= len(MICGAIN_LIST):
|
|
tmpmicgain = MICGAIN_LIST.index("+12.0dB")
|
|
rs = RadioSetting(
|
|
"mic_gain",
|
|
"Mic Gain",
|
|
RadioSettingValueList(
|
|
MICGAIN_LIST,
|
|
MICGAIN_LIST[tmpmicgain]))
|
|
basic.append(rs)
|
|
####################################### 0xF47 ############################################################
|
|
# MicBar
|
|
rs = RadioSetting(
|
|
"micbar",
|
|
"MicBar", RadioSettingValueBoolean(bool((_mem.micbar & 0x10) > 0)))
|
|
basic.append(rs)
|
|
|
|
# Compander
|
|
tmpcompander = _mem.compander >> 4
|
|
if tmpcompander >= len(COMPANDER_LIST):
|
|
tmpcompander = COMPANDER_LIST.index("Off")
|
|
rs = RadioSetting(
|
|
"compander",
|
|
"Compander",
|
|
RadioSettingValueList(
|
|
COMPANDER_LIST,
|
|
COMPANDER_LIST[tmpcompander]))
|
|
basic.append(rs)
|
|
|
|
# VOX switch
|
|
rs = RadioSetting(
|
|
"vox_switch",
|
|
"VOX enabled", RadioSettingValueBoolean(
|
|
bool(_mem.vox_switch > 0)))
|
|
basic.append(rs)
|
|
|
|
# VOX Level
|
|
tmpvox = _mem.vox_level+1
|
|
if tmpvox > 10:
|
|
tmpvox = 10
|
|
rs = RadioSetting("vox_level", "VOX Level",
|
|
RadioSettingValueInteger(1, 10, tmpvox))
|
|
basic.append(rs)
|
|
|
|
# call channel
|
|
tmpc = _mem.call_channel+1
|
|
if tmpc > 200:
|
|
tmpc = 1
|
|
rs = RadioSetting("call_channel", "One key call channel",
|
|
RadioSettingValueInteger(1, 200, tmpc))
|
|
basic.append(rs)
|
|
|
|
# Reminding of end of talk
|
|
tmpalarmmode = _mem.reminding_of_end_talk
|
|
if tmpalarmmode >= len(REMENDOFTALK_LIST):
|
|
tmpalarmmode = 0
|
|
rs = RadioSetting(
|
|
"reminding_of_end_talk",
|
|
"Reminding of end of talk (DigSRV)",
|
|
RadioSettingValueList(
|
|
REMENDOFTALK_LIST,
|
|
REMENDOFTALK_LIST[tmpalarmmode]))
|
|
basic.append(rs)
|
|
|
|
# Beacon
|
|
tmpbeacon = _mem.beacon
|
|
if tmpbeacon >= len(BEACON_LIST):
|
|
tmpbeacon = BEACON_LIST.index("Off")
|
|
rs = RadioSetting(
|
|
"beacon",
|
|
"Beacon/CQ Call",
|
|
RadioSettingValueList(
|
|
BEACON_LIST,
|
|
BEACON_LIST[tmpbeacon]))
|
|
basic.append(rs)
|
|
|
|
|
|
# Battery save
|
|
tmpbatsave = _mem.battery_save
|
|
if tmpbatsave >= len(BATSAVE_LIST):
|
|
tmpbatsave = BATSAVE_LIST.index("80%")
|
|
rs = RadioSetting(
|
|
"battery_save",
|
|
"Battery Save",
|
|
RadioSettingValueList(
|
|
BATSAVE_LIST,
|
|
BATSAVE_LIST[tmpbatsave]))
|
|
basic.append(rs)
|
|
|
|
################################################# 0xF4F ##########################################################################
|
|
# Single VFO BIT 1
|
|
rs = RadioSetting(
|
|
"single_vfo",
|
|
"Single VFO", RadioSettingValueBoolean(bool((_mem.single_vfo & 0x02) > 0)))
|
|
basic.append(rs)
|
|
|
|
# RSSI / S Meter BIT 2
|
|
rs = RadioSetting(
|
|
"signal_meter",
|
|
"SMeter (instead of RSSI)", RadioSettingValueBoolean(bool((_mem.signal_meter & 0x04) > 0)))
|
|
basic.append(rs)
|
|
|
|
# Satcom BIT 3
|
|
rs = RadioSetting(
|
|
"satcom",
|
|
"SATCOM", RadioSettingValueBoolean(bool((_mem.satcom & 0x08) > 0)))
|
|
basic.append(rs)
|
|
|
|
# Upconv BIT 4 e 5
|
|
tmpupconv = _mem.upconv >> 4 # sposta il bit di 4 posizioni a destra
|
|
if tmpupconv >= len(UPCONV_LIST):
|
|
tmpupconv = UPCONV_LIST.index("Off")
|
|
rs = RadioSetting(
|
|
"upconv",
|
|
"UP Converter", RadioSettingValueList(
|
|
UPCONV_LIST,
|
|
UPCONV_LIST[tmpupconv]))
|
|
basic.append(rs)
|
|
|
|
####################################################################################################################
|
|
|
|
# Crossband receiving/transmitting
|
|
tmpcross = _mem.crossband
|
|
if tmpcross >= len(CROSSBAND_LIST):
|
|
tmpcross = 0
|
|
rs = RadioSetting(
|
|
"crossband",
|
|
"Cross-band receiving/transmitting (Tx VFO)",
|
|
RadioSettingValueList(
|
|
CROSSBAND_LIST,
|
|
CROSSBAND_LIST[tmpcross]))
|
|
basic.append(rs)
|
|
|
|
# Dual watch
|
|
tmpdual = _mem.dual_watch
|
|
if tmpdual >= len(DUALWATCH_LIST):
|
|
tmpdual = 0
|
|
rs = RadioSetting("dualwatch", "Dual Watch (DualRX)", RadioSettingValueList(
|
|
DUALWATCH_LIST, DUALWATCH_LIST[tmpdual]))
|
|
basic.append(rs)
|
|
|
|
# Band TX
|
|
tmpbandstx = _mem.bands_tx
|
|
if tmpbandstx >= len(BANDS_TX_LIST):
|
|
tmpbandstx = 0
|
|
rs = RadioSetting("bands_tx", "Bands TX", RadioSettingValueList(
|
|
BANDS_TX_LIST, BANDS_TX_LIST[tmpbandstx]))
|
|
basic.append(rs)
|
|
|
|
# Power on display mode
|
|
tmpdispmode = _mem.power_on_dispmode
|
|
if tmpdispmode >= len(WELCOME_LIST):
|
|
tmpdispmode = 0
|
|
rs = RadioSetting(
|
|
"welcome_mode",
|
|
"Power on display MSG",
|
|
RadioSettingValueList(
|
|
WELCOME_LIST,
|
|
WELCOME_LIST[tmpdispmode]))
|
|
basic.append(rs)
|
|
|
|
# QRZ label
|
|
qrz_label = str(_mem.qrz_label).rstrip("\x20\x00\xff") + "\x00"
|
|
qrz_label = _getstring(qrz_label.encode('ascii', errors='ignore'), 0, 8)
|
|
rs = RadioSetting("qrz_label", _("QRA (8 characters)"),
|
|
RadioSettingValueString(0, 8, qrz_label))
|
|
basic.append(rs)
|
|
|
|
# Logo string 1
|
|
logo1 = str(_mem.logo_line1).strip("\x20\x00\xff") + "\x00"
|
|
logo1 = _getstring(logo1.encode('ascii', errors='ignore'), 0, 15)
|
|
rs = RadioSetting("logo1", _("Logo string 1 (15 characters)"),
|
|
RadioSettingValueString(0, 15, logo1))
|
|
basic.append(rs)
|
|
|
|
# Logo string 2
|
|
logo2 = str(_mem.logo_line2).strip("\x20\x00\xff") + "\x00"
|
|
logo2 = _getstring(logo2.encode('ascii', errors='ignore'), 0, 15)
|
|
rs = RadioSetting("logo2", _("Logo string 2 (15 characters)"),
|
|
RadioSettingValueString(0, 15, logo2))
|
|
basic.append(rs)
|
|
|
|
# NOAA autoscan
|
|
# rs = RadioSetting(
|
|
# "noaa_autoscan",
|
|
# "NOAA Autoscan (not implemented)", RadioSettingValueBoolean(
|
|
# bool(_mem.noaa_autoscan > 0)))
|
|
# basic.append(rs)
|
|
|
|
|
|
# VFO open
|
|
# rs = RadioSetting("vfo_open", "VFO open (???)",
|
|
# RadioSettingValueBoolean(bool(_mem.vfo_open > 0)))
|
|
# basic.append(rs)
|
|
|
|
# Keypad Tone
|
|
# tmpkeypadtone = _mem.keypad_tone
|
|
# if tmpkeypadtone >= len(KEYPADTONE_LIST):
|
|
# tmpkeypadtone = 0
|
|
# rs = RadioSetting("keypad_tone", "Voice prompts (not implemented)", RadioSettingValueList(
|
|
# KEYPADTONE_LIST, KEYPADTONE_LIST[tmpkeypadtone]))
|
|
# basic.append(rs)
|
|
|
|
# Language
|
|
# tmplanguage = _mem.language
|
|
# if tmplanguage >= len(LANGUAGE_LIST):
|
|
# tmplanguage = 0
|
|
# rs = RadioSetting("language", "Language (not implemented)", RadioSettingValueList(
|
|
# LANGUAGE_LIST, LANGUAGE_LIST[tmplanguage]))
|
|
# basic.append(rs)
|
|
|
|
# Alarm mode
|
|
# tmpalarmmode = _mem.alarm_mode
|
|
# if tmpalarmmode >= len(ALARMMODE_LIST):
|
|
# tmpalarmmode = 0
|
|
# rs = RadioSetting("alarm_mode", "Alarm mode (not implemented)", RadioSettingValueList(
|
|
# ALARMMODE_LIST, ALARMMODE_LIST[tmpalarmmode]))
|
|
# basic.append(rs)
|
|
|
|
# FM radio
|
|
for i in range(1, 21):
|
|
freqname = "FM_"+str(i)
|
|
fmfreq = _mem.fmfreq[i-1]/10.0
|
|
if fmfreq < FMMIN or fmfreq > FMMAX:
|
|
rs = RadioSetting(freqname, freqname,
|
|
RadioSettingValueString(0, 5, ""))
|
|
else:
|
|
rs = RadioSetting(freqname, freqname,
|
|
RadioSettingValueString(0, 5, str(fmfreq)))
|
|
|
|
fmradio.append(rs)
|
|
|
|
# unlock settings
|
|
|
|
# F-LOCK
|
|
tmpflock = _mem.lock.flock
|
|
if tmpflock >= len(FLOCK_LIST):
|
|
tmpflock = 0
|
|
rs = RadioSetting(
|
|
"flock", "F-LOCK",
|
|
RadioSettingValueList(FLOCK_LIST, FLOCK_LIST[tmpflock]))
|
|
unlock.append(rs)
|
|
|
|
# 350TX
|
|
# rs = RadioSetting("tx350", "350TX - unlock 350-400 MHz TX",
|
|
# RadioSettingValueBoolean(
|
|
# bool(_mem.lock.tx350 > 0)))
|
|
# unlock.append(rs)
|
|
|
|
# Killed
|
|
# rs = RadioSetting("Killed", "KILLED Device was disabled (via DTMF)",
|
|
# RadioSettingValueBoolean(
|
|
# bool(_mem.lock.killed > 0)))
|
|
# unlock.append(rs)
|
|
|
|
# 200TX
|
|
# rs = RadioSetting("tx200", "200TX - unlock 174-350 MHz TX",
|
|
# RadioSettingValueBoolean(
|
|
# bool(_mem.lock.tx200 > 0)))
|
|
# unlock.append(rs)
|
|
|
|
# 500TX
|
|
# rs = RadioSetting("tx500", "500TX - unlock 500-600 MHz TX",
|
|
# RadioSettingValueBoolean(
|
|
# bool(_mem.lock.tx500 > 0)))
|
|
# unlock.append(rs)
|
|
|
|
# 350EN
|
|
# rs = RadioSetting("en350", "350EN - unlock 350-400 MHz RX",
|
|
# RadioSettingValueBoolean(
|
|
# bool(_mem.lock.en350 > 0)))
|
|
# unlock.append(rs)
|
|
|
|
# SCREEN
|
|
# rs = RadioSetting("scrambler", "SCREN - scrambler enable",
|
|
# RadioSettingValueBoolean(
|
|
# bool(_mem.lock.enscramble > 0)))
|
|
# unlock.append(rs)
|
|
|
|
# readonly info
|
|
# Firmware
|
|
if self.FIRMWARE_VERSION == "":
|
|
firmware = "To get the firmware version please download"
|
|
"the image from the radio first"
|
|
else:
|
|
firmware = self.FIRMWARE_VERSION
|
|
|
|
val = RadioSettingValueString(0, 128, firmware)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("fw_ver", "Firmware Version", val)
|
|
roinfo.append(rs)
|
|
|
|
# No limits version for hacked firmware
|
|
val = RadioSettingValueBoolean(self._expanded_limits)
|
|
rs = RadioSetting("nolimits", "Limits disabled for modified firmware",
|
|
val)
|
|
rs.set_warning(_(
|
|
'This should only be enabled if you are using modified firmware '
|
|
'that supports wider frequency coverage. Enabling this will cause '
|
|
'CHIRP not to enforce OEM restrictions and may lead to undefined '
|
|
'or unregulated behavior. Use at your own risk!'),
|
|
safe_value=False)
|
|
roinfo.append(rs)
|
|
|
|
return top
|
|
|
|
# Store details about a high-level memory to the memory map
|
|
# This is called when a user edits a memory in the UI
|
|
def set_memory(self, mem):
|
|
number = mem.number-1
|
|
|
|
# Get a low-level memory object mapped to the image
|
|
_mem = self._memobj.channel[number]
|
|
_mem4 = self._memobj
|
|
# empty memory
|
|
if mem.empty:
|
|
_mem.set_raw("\xFF" * 16)
|
|
if number < 200:
|
|
_mem2 = self._memobj.channelname[number]
|
|
_mem2.set_raw("\xFF" * 16)
|
|
_mem4.channel_attributes[number].is_scanlist1 = 0
|
|
_mem4.channel_attributes[number].is_scanlist2 = 0
|
|
_mem4.channel_attributes[number].unknown1 = 0
|
|
_mem4.channel_attributes[number].unknown2 = 0
|
|
_mem4.channel_attributes[number].is_free = 1
|
|
_mem4.channel_attributes[number].band = 0x7
|
|
return mem
|
|
|
|
# clean the channel memory, restore some bits if it was used before
|
|
if _mem.get_raw(asbytes=False)[0] == "\xff":
|
|
# this was an empty memory
|
|
_mem.set_raw("\x00" * 16)
|
|
else:
|
|
# this memory wasn't empty, save some bits that we don't know the
|
|
# meaning of, or that we don't support yet
|
|
prev_0a = _mem.get_raw()[0x0a] & SAVE_MASK_0A
|
|
prev_0b = _mem.get_raw()[0x0b] & SAVE_MASK_0B
|
|
prev_0c = _mem.get_raw()[0x0c] & SAVE_MASK_0C
|
|
prev_0d = _mem.get_raw()[0x0d] & SAVE_MASK_0D
|
|
prev_0e = _mem.get_raw()[0x0e] & SAVE_MASK_0E
|
|
prev_0f = _mem.get_raw()[0x0f] & SAVE_MASK_0F
|
|
_mem.set_raw("\x00" * 10 +
|
|
chr(prev_0a) + chr(prev_0b) + chr(prev_0c) +
|
|
chr(prev_0d) + chr(prev_0e) + chr(prev_0f))
|
|
|
|
if number < 200:
|
|
_mem4.channel_attributes[number].is_scanlist1 = 0
|
|
_mem4.channel_attributes[number].is_scanlist2 = 0
|
|
_mem4.channel_attributes[number].unknown1 = 0
|
|
_mem4.channel_attributes[number].unknown2 = 0
|
|
_mem4.channel_attributes[number].is_free = 1
|
|
_mem4.channel_attributes[number].band = 0x7
|
|
|
|
# find band
|
|
band = _find_band(self, mem.freq)
|
|
|
|
# mode
|
|
if mem.mode == "FM":
|
|
_mem.enable_am = 0
|
|
_mem.enable_extramodes = 0
|
|
elif mem.mode == "AM":
|
|
_mem.enable_am = 1
|
|
_mem.enable_extramodes = 0
|
|
elif mem.mode == "USB":
|
|
_mem.enable_am = 0
|
|
_mem.enable_extramodes = 1
|
|
elif mem.mode == "CW":
|
|
_mem.enable_am = 1
|
|
_mem.enable_extramodes = 1
|
|
|
|
|
|
# frequency/offset
|
|
_mem.freq = mem.freq/10
|
|
_mem.offset = mem.offset/10
|
|
|
|
if mem.duplex == "":
|
|
_mem.offset = 0
|
|
_mem.shift = 0
|
|
elif mem.duplex == '-':
|
|
_mem.shift = FLAGS1_OFFSET_MINUS
|
|
elif mem.duplex == '+':
|
|
_mem.shift = FLAGS1_OFFSET_PLUS
|
|
elif mem.duplex == 'off':
|
|
# we fake tx disable by setting the tx freq to 0 MHz
|
|
_mem.shift = FLAGS1_OFFSET_MINUS
|
|
_mem.offset = _mem.freq
|
|
|
|
# set band
|
|
if number < 200:
|
|
_mem4.channel_attributes[number].is_free = 0
|
|
_mem4.channel_attributes[number].band = band
|
|
|
|
# channels >200 are the 14 VFO chanells and don't have names
|
|
if number < 200:
|
|
_mem2 = self._memobj.channelname[number]
|
|
tag = mem.name.ljust(10) + "\x00"*6
|
|
_mem2.name = tag # Store the alpha tag
|
|
|
|
# tone data
|
|
self._set_tone(mem, _mem)
|
|
|
|
# step
|
|
_mem.step = STEPS.index(mem.tuning_step)
|
|
|
|
# tx power
|
|
if str(mem.power) == str(UVK5_POWER_LEVELS[2]):
|
|
_mem.txpower = POWER_HIGH
|
|
elif str(mem.power) == str(UVK5_POWER_LEVELS[1]):
|
|
_mem.txpower = POWER_MEDIUM
|
|
else:
|
|
_mem.txpower = POWER_LOW
|
|
|
|
for setting in mem.extra:
|
|
sname = setting.get_name()
|
|
svalue = setting.value.get_value()
|
|
|
|
if sname == "bandwidth":
|
|
_mem.bandwidth = BANDWIDTH_LIST.index(svalue)
|
|
|
|
|
|
if sname == "bclo":
|
|
_mem.bclo = svalue and 1 or 0
|
|
|
|
if sname == "pttid":
|
|
_mem.dtmf_pttid = PTTID_LIST.index(svalue)
|
|
|
|
if sname == "frev":
|
|
_mem.freq_reverse = svalue and 1 or 0
|
|
|
|
if sname == "dtmfdecode":
|
|
_mem.dtmf_decode = svalue and 1 or 0
|
|
|
|
if sname == "scrambler":
|
|
_mem.scrambler = (
|
|
_mem.scrambler & 0xf0) | SCRAMBLER_LIST.index(svalue)
|
|
|
|
if number < 200 and sname == "scanlists":
|
|
if svalue == "1":
|
|
_mem4.channel_attributes[number].is_scanlist1 = 1
|
|
_mem4.channel_attributes[number].is_scanlist2 = 0
|
|
elif svalue == "2":
|
|
_mem4.channel_attributes[number].is_scanlist1 = 0
|
|
_mem4.channel_attributes[number].is_scanlist2 = 1
|
|
elif svalue == "1+2":
|
|
_mem4.channel_attributes[number].is_scanlist1 = 1
|
|
_mem4.channel_attributes[number].is_scanlist2 = 1
|
|
else:
|
|
_mem4.channel_attributes[number].is_scanlist1 = 0
|
|
_mem4.channel_attributes[number].is_scanlist2 = 0
|
|
|
|
return mem
|
|
|
|
|
|
@directory.register
|
|
class RA79Radio(UVK5Radio):
|
|
"""Retevis RA79"""
|
|
VENDOR = "Retevis"
|
|
MODEL = "RA79"
|
