Project

General

Profile

Download (68.1 KB)

Bug #11165 » uvk5.py

re-fixed module - Dan Smith, 02/13/2024 06:29 PM

 
# Quansheng UV-K5 driver (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>
#
# based on template.py Copyright 2012 Dan Smith <dsmith@danplanet.com>
#
#
# This is a preliminary version of a driver for the UV-K5
# It is based on my reverse engineering effort described here:
# https://github.com/sq5bpf/uvk5-reverse-engineering
#
# Warning: this driver is experimental, it may brick your radio,
# eat your lunch and mess up your configuration.
#
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.


import struct
import logging

from chirp import chirp_common, directory, bitwise, memmap, errors, util
from chirp.settings import RadioSetting, RadioSettingGroup, \
RadioSettingValueBoolean, RadioSettingValueList, \
RadioSettingValueInteger, RadioSettingValueString, \
RadioSettings

LOG = logging.getLogger(__name__)

# Show the obfuscated version of commands. Not needed normally, but
# might be useful for someone who is debugging a similar radio
DEBUG_SHOW_OBFUSCATED_COMMANDS = False

# Show the memory being written/received. Not needed normally, because
# this is the same information as in the packet hexdumps, but
# might be useful for someone debugging some obscure memory issue
DEBUG_SHOW_MEMORY_ACTIONS = False

MEM_FORMAT = """
#seekto 0x0000;
struct {
ul32 freq;
ul32 offset;
u8 rxcode;
u8 txcode;

u8 txcodeflag:4,
rxcodeflag:4;

//u8 flags1;
u8 flags1_unknown7:1,
flags1_unknown6:1,
flags1_unknown5:1,
enable_am:1,
flags1_unknown3:1,
is_in_scanlist:1,
shift:2;

//u8 flags2;
u8 flags2_unknown7:1,
flags2_unknown6:1,
flags2_unknown5:1,
bclo:1,
txpower:2,
bandwidth:1,
freq_reverse:1;

//u8 dtmf_flags;
u8 dtmf_flags_unknown7:1,
dtmf_flags_unknown6:1,
dtmf_flags_unknown5:1,
dtmf_flags_unknown4:1,
dtmf_flags_unknown3:1,
dtmf_pttid:2,
dtmf_decode:1;


u8 step;
u8 scrambler;
} channel[214];

#seekto 0xd60;
struct {
u8 is_scanlist1:1,
is_scanlist2:1,
compander:2,
is_free:1,
band:3;
} channel_attributes[200];

#seekto 0xe40;
ul16 fmfreq[20];

#seekto 0xe70;
u8 call_channel;
u8 squelch;
u8 max_talk_time;
u8 noaa_autoscan;
u8 key_lock;
u8 vox_switch;
u8 vox_level;
u8 mic_gain;
u8 unknown3;
u8 channel_display_mode;
u8 crossband;
u8 battery_save;
u8 dual_watch;
u8 backlight_auto_mode;
u8 tail_note_elimination;
u8 vfo_open;

#seekto 0xe90;
u8 beep_control;
u8 key1_shortpress_action;
u8 key1_longpress_action;
u8 key2_shortpress_action;
u8 key2_longpress_action;
u8 scan_resume_mode;
u8 auto_keypad_lock;
u8 power_on_dispmode;
u8 password[4];

#seekto 0xea0;
u8 keypad_tone;
u8 language;

#seekto 0xea8;
u8 alarm_mode;
u8 reminding_of_end_talk;
u8 repeater_tail_elimination;

#seekto 0xeb0;
char logo_line1[16];
char logo_line2[16];

#seekto 0xed0;
struct {
u8 side_tone;
char separate_code;
char group_call_code;
u8 decode_response;
u8 auto_reset_time;
u8 preload_time;
u8 first_code_persist_time;
u8 hash_persist_time;
u8 code_persist_time;
u8 code_interval_time;
u8 permit_remote_kill;
} dtmf_settings;

#seekto 0xee0;
struct {
char dtmf_local_code[3];
char unused1[5];
char kill_code[5];
char unused2[3];
char revive_code[5];
char unused3[3];
char dtmf_up_code[16];
char dtmf_down_code[16];
} dtmf_settings_numbers;

#seekto 0xf18;
u8 scanlist_default;
u8 scanlist1_priority_scan;
u8 scanlist1_priority_ch1;
u8 scanlist1_priority_ch2;
u8 scanlist2_priority_scan;
u8 scanlist2_priority_ch1;
u8 scanlist2_priority_ch2;
u8 scanlist_unknown_0xff;


#seekto 0xf40;
struct {
u8 flock;
u8 tx350;
u8 killed;
u8 tx200;
u8 tx500;
u8 en350;
u8 enscramble;
} lock;

#seekto 0xf50;
struct {
char name[16];
} channelname[200];

#seekto 0x1c00;
struct {
char name[8];
char number[3];
char unused_00[5];
} dtmfcontact[16];

#seekto 0x1ed0;
struct {
struct {
u8 start;
u8 mid;
u8 end;
} low;
struct {
u8 start;
u8 mid;
u8 end;
} medium;
struct {
u8 start;
u8 mid;
u8 end;
} high;
u8 unused_00[7];
} perbandpowersettings[7];

#seekto 0x1f40;
ul16 battery_level[6];
"""
# bits that we will save from the channel structure (mostly unknown)
SAVE_MASK_0A = 0b11001100
SAVE_MASK_0B = 0b11101100
SAVE_MASK_0C = 0b11100000
SAVE_MASK_0D = 0b11111000
SAVE_MASK_0E = 0b11110001
SAVE_MASK_0F = 0b11110000

# flags1
FLAGS1_OFFSET_NONE = 0b00
FLAGS1_OFFSET_MINUS = 0b10
FLAGS1_OFFSET_PLUS = 0b01

POWER_HIGH = 0b10
POWER_MEDIUM = 0b01
POWER_LOW = 0b00

# power
UVK5_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1.50),
chirp_common.PowerLevel("Med", watts=3.00),
chirp_common.PowerLevel("High", watts=5.00),
]

# scrambler
SCRAMBLER_LIST = ["off", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10"]

# channel display mode
CHANNELDISP_LIST = ["Frequency", "Channel No", "Channel Name"]
# battery save
BATSAVE_LIST = ["OFF", "1:1", "1:2", "1:3", "1:4"]

# Backlight auto mode
BACKLIGHT_LIST = ["Off", "1s", "2s", "3s", "4s", "5s"]

# Crossband receiving/transmitting
CROSSBAND_LIST = ["Off", "Band A", "Band B"]
DUALWATCH_LIST = CROSSBAND_LIST

# ctcss/dcs codes
TMODES = ["", "Tone", "DTCS", "DTCS"]
TONE_NONE = 0
TONE_CTCSS = 1
TONE_DCS = 2
TONE_RDCS = 3


CTCSS_TONES = [
67.0, 69.3, 71.9, 74.4, 77.0, 79.7, 82.5, 85.4,
88.5, 91.5, 94.8, 97.4, 100.0, 103.5, 107.2, 110.9,
114.8, 118.8, 123.0, 127.3, 131.8, 136.5, 141.3, 146.2,
151.4, 156.7, 159.8, 162.2, 165.5, 167.9, 171.3, 173.8,
177.3, 179.9, 183.5, 186.2, 189.9, 192.8, 196.6, 199.5,
203.5, 206.5, 210.7, 218.1, 225.7, 229.1, 233.6, 241.8,
250.3, 254.1
]

# lifted from ft4.py
DTCS_CODES = [
23, 25, 26, 31, 32, 36, 43, 47, 51, 53, 54,
65, 71, 72, 73, 74, 114, 115, 116, 122, 125, 131,
132, 134, 143, 145, 152, 155, 156, 162, 165, 172, 174,
205, 212, 223, 225, 226, 243, 244, 245, 246, 251, 252,
255, 261, 263, 265, 266, 271, 274, 306, 311, 315, 325,
331, 332, 343, 346, 351, 356, 364, 365, 371, 411, 412,
413, 423, 431, 432, 445, 446, 452, 454, 455, 462, 464,
465, 466, 503, 506, 516, 523, 526, 532, 546, 565, 606,
612, 624, 627, 631, 632, 654, 662, 664, 703, 712, 723,
731, 732, 734, 743, 754
]

FLOCK_LIST = ["Off", "FCC", "CE", "GB", "430", "438"]

SCANRESUME_LIST = ["TO: Resume after 5 seconds",
"CO: Resume after signal disappears",
"SE: Stop scanning after receiving a signal"]

WELCOME_LIST = ["Full Screen", "Welcome Info", "Voltage"]
KEYPADTONE_LIST = ["Off", "Chinese", "English"]
LANGUAGE_LIST = ["Chinese", "English"]
ALARMMODE_LIST = ["SITE", "TONE"]
REMENDOFTALK_LIST = ["Off", "ROGER", "MDC"]
RTE_LIST = ["Off", "100ms", "200ms", "300ms", "400ms",
"500ms", "600ms", "700ms", "800ms", "900ms"]

MEM_SIZE = 0x2000 # size of all memory
PROG_SIZE = 0x1d00 # size of the memory that we will write
MEM_BLOCK = 0x80 # largest block of memory that we can reliably write

# fm radio supported frequencies
FMMIN = 76.0
FMMAX = 108.0

# bands supported by the UV-K5
BANDS = {
0: [50.0, 76.0],
1: [108.0, 135.9999],
2: [136.0, 199.9990],
3: [200.0, 299.9999],
4: [350.0, 399.9999],
5: [400.0, 469.9999],
6: [470.0, 600.0]
}

# for radios with modified firmware:
BANDS_NOLIMITS = {
0: [18.0, 76.0],
1: [108.0, 135.9999],
2: [136.0, 199.9990],
3: [200.0, 299.9999],
4: [350.0, 399.9999],
5: [400.0, 469.9999],
6: [470.0, 1300.0]
}

SPECIALS = {
"F1(50M-76M)A": 200,
"F1(50M-76M)B": 201,
"F2(108M-136M)A": 202,
"F2(108M-136M)B": 203,
"F3(136M-174M)A": 204,
"F3(136M-174M)B": 205,
"F4(174M-350M)A": 206,
"F4(174M-350M)B": 207,
"F5(350M-400M)A": 208,
"F5(350M-400M)B": 209,
"F6(400M-470M)A": 210,
"F6(400M-470M)B": 211,
"F7(470M-600M)A": 212,
"F7(470M-600M)B": 213
}

VFO_CHANNEL_NAMES = ["F1(50M-76M)A", "F1(50M-76M)B",
"F2(108M-136M)A", "F2(108M-136M)B",
"F3(136M-174M)A", "F3(136M-174M)B",
"F4(174M-350M)A", "F4(174M-350M)B",
"F5(350M-400M)A", "F5(350M-400M)B",
"F6(400M-470M)A", "F6(400M-470M)B",
"F7(470M-600M)A", "F7(470M-600M)B"]

SCANLIST_LIST = ["None", "1", "2", "1+2"]

DTMF_CHARS = "0123456789ABCD*# "
DTMF_CHARS_ID = "0123456789ABCDabcd"
DTMF_CHARS_KILL = "0123456789ABCDabcd"
DTMF_CHARS_UPDOWN = "0123456789ABCDabcd#* "
DTMF_CODE_CHARS = "ABCD*# "
DTMF_DECODE_RESPONSE_LIST = ["None", "Ring", "Reply", "Both"]

KEYACTIONS_LIST = ["None", "Flashlight on/off", "Power select",
"Monitor", "Scan on/off", "VOX on/off",
"Alarm on/off", "FM radio on/off", "Transmit 1750 Hz"]


def xorarr(data: bytes):
"""the communication is obfuscated using this fine mechanism"""
tbl = [22, 108, 20, 230, 46, 145, 13, 64, 33, 53, 213, 64, 19, 3, 233, 128]
ret = b""
idx = 0
for byte in data:
ret += bytes([byte ^ tbl[idx]])
idx = (idx+1) % len(tbl)
return ret


def calculate_crc16_xmodem(data: bytes):
"""
if this crc was used for communication to AND from the radio, then it
would be a measure to increase reliability.
but it's only used towards the radio, so it's for further obfuscation
"""
poly = 0x1021
crc = 0x0
for byte in data:
crc = crc ^ (byte << 8)
for _ in range(8):
crc = crc << 1
if crc & 0x10000:
crc = (crc ^ poly) & 0xFFFF
return crc & 0xFFFF


def _send_command(serport, data: bytes):
"""Send a command to UV-K5 radio"""
LOG.debug("Sending command (unobfuscated) len=0x%4.4x:\n%s",
len(data), util.hexprint(data))

crc = calculate_crc16_xmodem(data)
data2 = data + struct.pack("<H", crc)

command = struct.pack(">HBB", 0xabcd, len(data), 0) + \
xorarr(data2) + \
struct.pack(">H", 0xdcba)
if DEBUG_SHOW_OBFUSCATED_COMMANDS:
LOG.debug("Sending command (obfuscated):\n%s", util.hexprint(command))
try:
result = serport.write(command)
except Exception as e:
raise errors.RadioError("Error writing data to radio") from e
return result


def _receive_reply(serport):
header = serport.read(4)
if len(header) != 4:
LOG.warning("Header short read: [%s] len=%i",
util.hexprint(header), len(header))
raise errors.RadioError("Header short read")
if header[0] != 0xAB or header[1] != 0xCD or header[3] != 0x00:
LOG.warning("Bad response header: %s len=%i",
util.hexprint(header), len(header))
raise errors.RadioError("Bad response header")

cmd = serport.read(int(header[2]))
if len(cmd) != int(header[2]):
LOG.warning("Body short read: [%s] len=%i",
util.hexprint(cmd), len(cmd))
raise errors.RadioError("Command body short read")

footer = serport.read(4)

if len(footer) != 4:
LOG.warning("Footer short read: [%s] len=%i",
util.hexprint(footer), len(footer))
raise errors.RadioError("Footer short read")

if footer[2] != 0xDC or footer[3] != 0xBA:
LOG.debug("Reply before bad response footer (obfuscated)"
"len=0x%4.4x:\n%s", len(cmd), util.hexprint(cmd))
LOG.warning("Bad response footer: %s len=%i",
util.hexprint(footer), len(footer))
raise errors.RadioError("Bad response footer")

if DEBUG_SHOW_OBFUSCATED_COMMANDS:
LOG.debug("Received reply (obfuscated) len=0x%4.4x:\n%s",
len(cmd), util.hexprint(cmd))

cmd2 = xorarr(cmd)

LOG.debug("Received reply (unobfuscated) len=0x%4.4x:\n%s",
len(cmd2), util.hexprint(cmd2))

return cmd2


def _getstring(data: bytes, begin, maxlen):
tmplen = min(maxlen+1, len(data))
ss = [data[i] for i in range(begin, tmplen)]
key = 0
for key, val in enumerate(ss):
if val < ord(' ') or val > ord('~'):
return ''.join(chr(x) for x in ss[0:key])
return ''


def _sayhello(serport):
hellopacket = b"\x14\x05\x04\x00\x6a\x39\x57\x64"

tries = 5
while True:
LOG.debug("Sending hello packet")
_send_command(serport, hellopacket)
rep = _receive_reply(serport)
if rep:
break
tries -= 1
if tries == 0:
LOG.warning("Failed to initialise radio")
raise errors.RadioError("Failed to initialize radio")
if rep.startswith(b'\x18\x05'):
raise errors.RadioError("Radio is in programming mode, "
"restart radio into normal mode")
firmware = _getstring(rep, 4, 24)

LOG.info("Found firmware: %s", firmware)
return firmware


def _readmem(serport, offset, length):
LOG.debug("Sending readmem offset=0x%4.4x len=0x%4.4x", offset, length)

readmem = b"\x1b\x05\x08\x00" + \
struct.pack("<HBB", offset, length, 0) + \
b"\x6a\x39\x57\x64"
_send_command(serport, readmem)
rep = _receive_reply(serport)
if DEBUG_SHOW_MEMORY_ACTIONS:
LOG.debug("readmem Received data len=0x%4.4x:\n%s",
len(rep), util.hexprint(rep))
return rep[8:]


def _writemem(serport, data, offset):
LOG.debug("Sending writemem offset=0x%4.4x len=0x%4.4x",
offset, len(data))

if DEBUG_SHOW_MEMORY_ACTIONS:
LOG.debug("writemem sent data offset=0x%4.4x len=0x%4.4x:\n%s",
offset, len(data), util.hexprint(data))

dlen = len(data)
writemem = b"\x1d\x05" + \
struct.pack("<BBHBB", dlen+8, 0, offset, dlen, 1) + \
b"\x6a\x39\x57\x64"+data

_send_command(serport, writemem)
rep = _receive_reply(serport)

LOG.debug("writemem Received data: %s len=%i",
util.hexprint(rep), len(rep))

if (rep[0] == 0x1e and
rep[4] == (offset & 0xff) and
rep[5] == (offset >> 8) & 0xff):
return True

LOG.warning("Bad data from writemem")
raise errors.RadioError("Bad response to writemem")


def _resetradio(serport):
resetpacket = b"\xdd\x05\x00\x00"
_send_command(serport, resetpacket)


def do_download(radio):
"""download eeprom from radio"""
serport = radio.pipe
serport.timeout = 0.5
status = chirp_common.Status()
status.cur = 0
status.max = MEM_SIZE
status.msg = "Downloading from radio"
radio.status_fn(status)

eeprom = b""
f = _sayhello(serport)
if not f:
raise errors.RadioError('Unable to determine firmware version')

if not radio.k5_approve_firmware(f):
raise errors.RadioError(
'Firmware version is not supported by this driver')

radio.metadata = {'uvk5_firmware': f}

addr = 0
while addr < MEM_SIZE:
data = _readmem(serport, addr, MEM_BLOCK)
status.cur = addr
radio.status_fn(status)

if data and len(data) == MEM_BLOCK:
eeprom += data
addr += MEM_BLOCK
else:
raise errors.RadioError("Memory download incomplete")

return memmap.MemoryMapBytes(eeprom)


def do_upload(radio):
"""upload configuration to radio eeprom"""
serport = radio.pipe
serport.timeout = 0.5
status = chirp_common.Status()
status.cur = 0
status.msg = "Uploading to radio"

if radio._upload_calibration:
status.max = MEM_SIZE - radio._cal_start
start_addr = radio._cal_start
stop_addr = MEM_SIZE
else:
status.max = PROG_SIZE
start_addr = 0
stop_addr = PROG_SIZE

radio.status_fn(status)

f = _sayhello(serport)
if not f:
raise errors.RadioError('Unable to determine firmware version')

if not radio.k5_approve_firmware(f):
raise errors.RadioError(
'Firmware version is not supported by this driver')
LOG.info('Uploading image from firmware %r to radio with %r',
radio.metadata.get('uvk5_firmware', 'unknown'), f)
addr = start_addr
while addr < stop_addr:
dat = radio.get_mmap()[addr:addr+MEM_BLOCK]
_writemem(serport, dat, addr)
status.cur = addr - start_addr
radio.status_fn(status)
if dat:
addr += MEM_BLOCK
else:
raise errors.RadioError("Memory upload incomplete")
status.msg = "Uploaded OK"

_resetradio(serport)

return True


def _find_band(nolimits, hz):
mhz = hz/1000000.0
if nolimits:
B = BANDS_NOLIMITS
else:
B = BANDS

# currently the hacked firmware sets band=1 below 50 MHz
if nolimits and mhz < 50.0:
return 1

for a in B:
if mhz >= B[a][0] and mhz <= B[a][1]:
return a
return False


class UVK5RadioBase(chirp_common.CloneModeRadio):
"""Quansheng UV-K5"""
VENDOR = "Quansheng"
MODEL = "UV-K5"
BAUD_RATE = 38400
NEEDS_COMPAT_SERIAL = False
_cal_start = 0
_expanded_limits = False
_upload_calibration = False
_pttid_list = ["off", "BOT", "EOT", "BOTH"]
_steps = [1.0, 2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 8.33]

@classmethod
def k5_approve_firmware(cls, firmware):
# All subclasses must implement this
raise NotImplementedError()

@classmethod
def detect_from_serial(cls, pipe):
firmware = _sayhello(pipe)
print(UVK5Radio)
print(cls.DETECTED_MODELS)
for rclass in [UVK5Radio] + (cls.DETECTED_MODELS or []):
if rclass.k5_approve_firmware(firmware):
return rclass
raise errors.RadioError('Firmware %r not supported' % firmware)

def get_prompts(x=None):
rp = chirp_common.RadioPrompts()
rp.experimental = _(
'This is an experimental driver for the Quansheng UV-K5. '
'It may harm your radio, or worse. Use at your own risk.\n\n'
'Before attempting to do any changes please download '
'the memory image from the radio with chirp '
'and keep it. This can be later used to recover the '
'original settings. \n\n'
'some details are not yet implemented')
rp.pre_download = _(
"1. Turn radio on.\n"
"2. Connect cable to mic/spkr connector.\n"
"3. Make sure connector is firmly connected.\n"
"4. Click OK to download image from device.\n\n"
"It will may not work if you turn on the radio "
"with the cable already attached\n")
rp.pre_upload = _(
"1. Turn radio on.\n"
"2. Connect cable to mic/spkr connector.\n"
"3. Make sure connector is firmly connected.\n"
"4. Click OK to upload the image to device.\n\n"
"It will may not work if you turn on the radio "
"with the cable already attached")
return rp

# Return information about this radio's features, including
# how many memories it has, what bands it supports, etc
def get_features(self):
rf = chirp_common.RadioFeatures()
rf.has_bank = False
rf.valid_dtcs_codes = DTCS_CODES
rf.has_rx_dtcs = True
rf.has_ctone = True
rf.has_settings = True
rf.has_comment = False
rf.valid_name_length = 10
rf.valid_power_levels = UVK5_POWER_LEVELS
rf.valid_special_chans = list(SPECIALS.keys())
rf.valid_duplexes = ["", "-", "+", "off"]

# hack so we can input any frequency,
# the 0.1 and 0.01 steps don't work unfortunately
rf.valid_tuning_steps = list(self._steps)

rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]

rf.valid_characters = chirp_common.CHARSET_ASCII
rf.valid_modes = ["FM", "NFM", "AM", "NAM"]
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]

rf.valid_skips = [""]

# This radio supports memories 1-200, 201-214 are the VFO memories
rf.memory_bounds = (1, 200)

rf.valid_bands = []
for a in BANDS_NOLIMITS:
rf.valid_bands.append(
(int(BANDS_NOLIMITS[a][0]*1000000),
int(BANDS_NOLIMITS[a][1]*1000000)))
return rf

# Do a download of the radio from the serial port
def sync_in(self):
self._mmap = do_download(self)
self.process_mmap()

# Do an upload of the radio to the serial port
def sync_out(self):
do_upload(self)

def _check_firmware_at_load(self):
firmware = self.metadata.get('uvk5_firmware')
if not firmware:
LOG.warning(_('This image is missing firmware information. '
'It may have been generated with an old or '
'modified version of CHIRP. It is advised that '
'you download a fresh image from your radio and '
'use that going forward for the best safety and '
'compatibility.'))
elif not self.k5_approve_firmware(self.metadata['uvk5_firmware']):
raise errors.RadioError(
'Image firmware is %r but is not supported by '
'this driver' % firmware)

# Convert the raw byte array into a memory object structure
def process_mmap(self):
self._check_firmware_at_load()
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)

# Return a raw representation of the memory object, which
# is very helpful for development
def get_raw_memory(self, number):
return repr(self._memobj.channel[number-1])

def validate_memory(self, mem):
msgs = super().validate_memory(mem)

if mem.duplex == 'off':
return msgs

# find tx frequency
if mem.duplex == '-':
txfreq = mem.freq - mem.offset
elif mem.duplex == '+':
txfreq = mem.freq + mem.offset
else:
txfreq = mem.freq

# find band
band = _find_band(self._expanded_limits, txfreq)
if band is False:
msg = "Transmit frequency %.4f MHz is not supported by this radio"\
% (txfreq/1000000.0)
msgs.append(chirp_common.ValidationError(msg))

band = _find_band(self._expanded_limits, mem.freq)
if band is False:
msg = "The frequency %.4f MHz is not supported by this radio" \
% (mem.freq/1000000.0)
msgs.append(chirp_common.ValidationError(msg))

return msgs

def _set_tone(self, mem, _mem):
((txmode, txtone, txpol),
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)

if txmode == "Tone":
txtoval = CTCSS_TONES.index(txtone)
txmoval = 0b01
elif txmode == "DTCS":
txmoval = txpol == "R" and 0b11 or 0b10
txtoval = DTCS_CODES.index(txtone)
else:
txmoval = 0
txtoval = 0

if rxmode == "Tone":
rxtoval = CTCSS_TONES.index(rxtone)
rxmoval = 0b01
elif rxmode == "DTCS":
rxmoval = rxpol == "R" and 0b11 or 0b10
rxtoval = DTCS_CODES.index(rxtone)
else:
rxmoval = 0
rxtoval = 0

_mem.rxcodeflag = rxmoval
_mem.txcodeflag = txmoval
_mem.rxcode = rxtoval
_mem.txcode = txtoval

def _get_tone(self, mem, _mem):
rxtype = _mem.rxcodeflag
txtype = _mem.txcodeflag
rx_tmode = TMODES[rxtype]
tx_tmode = TMODES[txtype]

rx_tone = tx_tone = None

if tx_tmode == "Tone":
if _mem.txcode < len(CTCSS_TONES):
tx_tone = CTCSS_TONES[_mem.txcode]
else:
tx_tone = 0
tx_tmode = ""
elif tx_tmode == "DTCS":
if _mem.txcode < len(DTCS_CODES):
tx_tone = DTCS_CODES[_mem.txcode]
else:
tx_tone = 0
tx_tmode = ""

if rx_tmode == "Tone":
if _mem.rxcode < len(CTCSS_TONES):
rx_tone = CTCSS_TONES[_mem.rxcode]
else:
rx_tone = 0
rx_tmode = ""
elif rx_tmode == "DTCS":
if _mem.rxcode < len(DTCS_CODES):
rx_tone = DTCS_CODES[_mem.rxcode]
else:
rx_tone = 0
rx_tmode = ""

tx_pol = txtype == 0x03 and "R" or "N"
rx_pol = rxtype == 0x03 and "R" or "N"

chirp_common.split_tone_decode(mem, (tx_tmode, tx_tone, tx_pol),
(rx_tmode, rx_tone, rx_pol))

def _get_mem_extra(self, mem, _mem):
tmpscn = SCANLIST_LIST[0]

# We'll also look at the channel attributes if a memory has them
if mem.number <= 200:
_mem3 = self._memobj.channel_attributes[mem.number - 1]
# free memory bit
if _mem3.is_free > 0:
mem.empty = True
# scanlists
if _mem3.is_scanlist1 > 0 and _mem3.is_scanlist2 > 0:
tmpscn = SCANLIST_LIST[3] # "1+2"
elif _mem3.is_scanlist1 > 0:
tmpscn = SCANLIST_LIST[1] # "1"
elif _mem3.is_scanlist2 > 0:
tmpscn = SCANLIST_LIST[2] # "2"

mem.extra = RadioSettingGroup("Extra", "extra")

# BCLO
is_bclo = bool(_mem.bclo > 0)
rs = RadioSetting("bclo", "BCLO", RadioSettingValueBoolean(is_bclo))
mem.extra.append(rs)

# Frequency reverse - whatever that means, don't see it in the manual
is_frev = bool(_mem.freq_reverse > 0)
rs = RadioSetting("frev", "FreqRev", RadioSettingValueBoolean(is_frev))
mem.extra.append(rs)

# PTTID
try:
pttid = self._pttid_list[_mem.dtmf_pttid]
except IndexError:
pttid = 0
rs = RadioSetting("pttid", "PTTID", RadioSettingValueList(
self._pttid_list, pttid))
mem.extra.append(rs)

# DTMF DECODE
is_dtmf = bool(_mem.dtmf_decode > 0)
rs = RadioSetting("dtmfdecode", _("DTMF decode"),
RadioSettingValueBoolean(is_dtmf))
mem.extra.append(rs)

# Scrambler
if _mem.scrambler & 0x0f < len(SCRAMBLER_LIST):
enc = _mem.scrambler & 0x0f
else:
enc = 0

rs = RadioSetting("scrambler", _("Scrambler"), RadioSettingValueList(
SCRAMBLER_LIST, SCRAMBLER_LIST[enc]))
mem.extra.append(rs)

rs = RadioSetting("scanlists", _("Scanlists"), RadioSettingValueList(
SCANLIST_LIST, tmpscn))
mem.extra.append(rs)

def _get_mem_mode(self, _mem):
if _mem.enable_am > 0:
if _mem.bandwidth > 0:
return "NAM"
else:
return "AM"
else:
if _mem.bandwidth > 0:
return "NFM"
else:
return "FM"

def _get_specials(self):
return dict(SPECIALS)

# Extract a high-level memory object from the low-level memory map
# This is called to populate a memory in the UI
def get_memory(self, number2):

mem = chirp_common.Memory()

if isinstance(number2, str):
number = self._get_specials()[number2]
mem.extd_number = number2
else:
number = number2 - 1

mem.number = number + 1

_mem = self._memobj.channel[number]

# We'll consider any blank (i.e. 0 MHz frequency) to be empty
if (_mem.freq == 0xffffffff) or (_mem.freq == 0):
mem.empty = True

self._get_mem_extra(mem, _mem)

if mem.empty:
return mem

if number > 199:
mem.immutable = ["name", "scanlists"]
else:
_mem2 = self._memobj.channelname[number]
for char in _mem2.name:
if str(char) == "\xFF" or str(char) == "\x00":
break
mem.name += str(char)
mem.name = mem.name.rstrip()

# Convert your low-level frequency to Hertz
mem.freq = int(_mem.freq)*10
mem.offset = int(_mem.offset)*10

if (mem.offset == 0):
mem.duplex = ''
else:
if _mem.shift == FLAGS1_OFFSET_MINUS:
if _mem.freq == _mem.offset:
# fake tx disable by setting tx to 0 MHz
mem.duplex = 'off'
mem.offset = 0
else:
mem.duplex = '-'
elif _mem.shift == FLAGS1_OFFSET_PLUS:
mem.duplex = '+'
else:
mem.duplex = ''

# tone data
self._get_tone(mem, _mem)

mem.mode = self._get_mem_mode(_mem)

# tuning step
try:
mem.tuning_step = self._steps[_mem.step]
except IndexError:
mem.tuning_step = 2.5

# power
if _mem.txpower == POWER_HIGH:
mem.power = UVK5_POWER_LEVELS[2]
elif _mem.txpower == POWER_MEDIUM:
mem.power = UVK5_POWER_LEVELS[1]
else:
mem.power = UVK5_POWER_LEVELS[0]

# We'll consider any blank (i.e. 0 MHz frequency) to be empty
if (_mem.freq == 0xffffffff) or (_mem.freq == 0):
mem.empty = True
else:
mem.empty = False

return mem

def set_settings(self, settings):
_mem = self._memobj
for element in settings:
if not isinstance(element, RadioSetting):
self.set_settings(element)
continue

# basic settings

# call channel
if element.get_name() == "call_channel":
_mem.call_channel = int(element.value)-1

# squelch
if element.get_name() == "squelch":
_mem.squelch = int(element.value)
# TOT
if element.get_name() == "tot":
_mem.max_talk_time = int(element.value)

# NOAA autoscan
if element.get_name() == "noaa_autoscan":
_mem.noaa_autoscan = element.value and 1 or 0

# VOX switch
if element.get_name() == "vox_switch":
_mem.vox_switch = element.value and 1 or 0

# vox level
if element.get_name() == "vox_level":
_mem.vox_level = int(element.value)-1

# mic gain
if element.get_name() == "mic_gain":
_mem.mic_gain = int(element.value)

# Channel display mode
if element.get_name() == "channel_display_mode":
_mem.channel_display_mode = CHANNELDISP_LIST.index(
str(element.value))

# Crossband receiving/transmitting
if element.get_name() == "crossband":
_mem.crossband = CROSSBAND_LIST.index(str(element.value))

# Battery Save
if element.get_name() == "battery_save":
_mem.battery_save = BATSAVE_LIST.index(str(element.value))
# Dual Watch
if element.get_name() == "dualwatch":
_mem.dual_watch = DUALWATCH_LIST.index(str(element.value))

# Backlight auto mode
if element.get_name() == "backlight_auto_mode":
_mem.backlight_auto_mode = \
BACKLIGHT_LIST.index(str(element.value))

# Tail tone elimination
if element.get_name() == "tail_note_elimination":
_mem.tail_note_elimination = element.value and 1 or 0

# VFO Open
if element.get_name() == "vfo_open":
_mem.vfo_open = element.value and 1 or 0

# Beep control
if element.get_name() == "beep_control":
_mem.beep_control = element.value and 1 or 0

# Scan resume mode
if element.get_name() == "scan_resume_mode":
_mem.scan_resume_mode = SCANRESUME_LIST.index(
str(element.value))

# Keypad lock
if element.get_name() == "key_lock":
_mem.key_lock = element.value and 1 or 0

# Auto keypad lock
if element.get_name() == "auto_keypad_lock":
_mem.auto_keypad_lock = element.value and 1 or 0

# Power on display mode
if element.get_name() == "welcome_mode":
_mem.power_on_dispmode = WELCOME_LIST.index(str(element.value))

# Keypad Tone
if element.get_name() == "keypad_tone":
_mem.keypad_tone = KEYPADTONE_LIST.index(str(element.value))

# Language
if element.get_name() == "language":
_mem.language = LANGUAGE_LIST.index(str(element.value))

# Alarm mode
if element.get_name() == "alarm_mode":
_mem.alarm_mode = ALARMMODE_LIST.index(str(element.value))

# Reminding of end of talk
if element.get_name() == "reminding_of_end_talk":
_mem.reminding_of_end_talk = REMENDOFTALK_LIST.index(
str(element.value))

# Repeater tail tone elimination
if element.get_name() == "repeater_tail_elimination":
_mem.repeater_tail_elimination = RTE_LIST.index(
str(element.value))

# Logo string 1
if element.get_name() == "logo1":
b = str(element.value).rstrip("\x20\xff\x00")+"\x00"*12
_mem.logo_line1 = b[0:12]+"\x00\xff\xff\xff"

# Logo string 2
if element.get_name() == "logo2":
b = str(element.value).rstrip("\x20\xff\x00")+"\x00"*12
_mem.logo_line2 = b[0:12]+"\x00\xff\xff\xff"

# unlock settings

# FLOCK
if element.get_name() == "flock":
_mem.lock.flock = FLOCK_LIST.index(str(element.value))

# 350TX
if element.get_name() == "tx350":
_mem.lock.tx350 = element.value and 1 or 0

# 200TX
if element.get_name() == "tx200":
_mem.lock.tx200 = element.value and 1 or 0

# 500TX
if element.get_name() == "tx500":
_mem.lock.tx500 = element.value and 1 or 0

# 350EN
if element.get_name() == "en350":
_mem.lock.en350 = element.value and 1 or 0

# SCREN
if element.get_name() == "enscramble":
_mem.lock.enscramble = element.value and 1 or 0

# KILLED
if element.get_name() == "killed":
_mem.lock.killed = element.value and 1 or 0

# fm radio
for i in range(1, 21):
freqname = "FM_" + str(i)
if element.get_name() == freqname:
val = str(element.value).strip()
try:
val2 = int(float(val)*10)
except Exception:
val2 = 0xffff

if val2 < FMMIN*10 or val2 > FMMAX*10:
val2 = 0xffff
# raise errors.InvalidValueError(
# "FM radio frequency should be a value "
# "in the range %.1f - %.1f" % (FMMIN , FMMAX))
_mem.fmfreq[i-1] = val2

# dtmf settings
if element.get_name() == "dtmf_side_tone":
_mem.dtmf_settings.side_tone = \
element.value and 1 or 0

if element.get_name() == "dtmf_separate_code":
_mem.dtmf_settings.separate_code = str(element.value)

if element.get_name() == "dtmf_group_call_code":
_mem.dtmf_settings.group_call_code = element.value

if element.get_name() == "dtmf_decode_response":
_mem.dtmf_settings.decode_response = \
DTMF_DECODE_RESPONSE_LIST.index(str(element.value))

if element.get_name() == "dtmf_auto_reset_time":
_mem.dtmf_settings.auto_reset_time = \
int(int(element.value)/10)

if element.get_name() == "dtmf_preload_time":
_mem.dtmf_settings.preload_time = \
int(int(element.value)/10)

if element.get_name() == "dtmf_first_code_persist_time":
_mem.dtmf_settings.first_code_persist_time = \
int(int(element.value)/10)

if element.get_name() == "dtmf_hash_persist_time":
_mem.dtmf_settings.hash_persist_time = \
int(int(element.value)/10)

if element.get_name() == "dtmf_code_persist_time":
_mem.dtmf_settings.code_persist_time = \
int(int(element.value)/10)

if element.get_name() == "dtmf_code_interval_time":
_mem.dtmf_settings.code_interval_time = \
int(int(element.value)/10)

if element.get_name() == "dtmf_permit_remote_kill":
_mem.dtmf_settings.permit_remote_kill = \
element.value and 1 or 0

if element.get_name() == "dtmf_dtmf_local_code":
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*3
_mem.dtmf_settings_numbers.dtmf_local_code = k[0:3]

if element.get_name() == "dtmf_dtmf_up_code":
k = str(element.value).strip("\x20\xff\x00") + "\x00"*16
_mem.dtmf_settings_numbers.dtmf_up_code = k[0:16]

if element.get_name() == "dtmf_dtmf_down_code":
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*16
_mem.dtmf_settings_numbers.dtmf_down_code = k[0:16]

if element.get_name() == "dtmf_kill_code":
k = str(element.value).strip("\x20\xff\x00") + "\x00"*5
_mem.dtmf_settings_numbers.kill_code = k[0:5]

if element.get_name() == "dtmf_revive_code":
k = str(element.value).strip("\x20\xff\x00") + "\x00"*5
_mem.dtmf_settings_numbers.revive_code = k[0:5]

# dtmf contacts
for i in range(1, 17):
varname = "DTMF_" + str(i)
if element.get_name() == varname:
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
_mem.dtmfcontact[i-1].name = k[0:8]

varnumname = "DTMFNUM_" + str(i)
if element.get_name() == varnumname:
k = str(element.value).rstrip("\x20\xff\x00") + "\xff"*3
_mem.dtmfcontact[i-1].number = k[0:3]

# scanlist stuff
if element.get_name() == "scanlist_default":
val = (int(element.value) == 2) and 1 or 0
_mem.scanlist_default = val

if element.get_name() == "scanlist1_priority_scan":
_mem.scanlist1_priority_scan = \
element.value and 1 or 0

if element.get_name() == "scanlist2_priority_scan":
_mem.scanlist2_priority_scan = \
element.value and 1 or 0

if element.get_name() == "scanlist1_priority_ch1" or \
element.get_name() == "scanlist1_priority_ch2" or \
element.get_name() == "scanlist2_priority_ch1" or \
element.get_name() == "scanlist2_priority_ch2":

val = int(element.value)

if val > 200 or val < 1:
val = 0xff
else:
val -= 1

if element.get_name() == "scanlist1_priority_ch1":
_mem.scanlist1_priority_ch1 = val
if element.get_name() == "scanlist1_priority_ch2":
_mem.scanlist1_priority_ch2 = val
if element.get_name() == "scanlist2_priority_ch1":
_mem.scanlist2_priority_ch1 = val
if element.get_name() == "scanlist2_priority_ch2":
_mem.scanlist2_priority_ch2 = val

if element.get_name() == "key1_shortpress_action":
_mem.key1_shortpress_action = KEYACTIONS_LIST.index(
str(element.value))

if element.get_name() == "key1_longpress_action":
_mem.key1_longpress_action = KEYACTIONS_LIST.index(
str(element.value))

if element.get_name() == "key2_shortpress_action":
_mem.key2_shortpress_action = KEYACTIONS_LIST.index(
str(element.value))

if element.get_name() == "key2_longpress_action":
_mem.key2_longpress_action = KEYACTIONS_LIST.index(
str(element.value))

if element.get_name() == "nolimits":
LOG.warning("User expanded band limits")
self._expanded_limits = bool(element.value)

def get_settings(self):
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
keya = RadioSettingGroup("keya", "Programmable keys")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
dtmfc = RadioSettingGroup("dtmfc", "DTMF Contacts")
scanl = RadioSettingGroup("scn", "Scan Lists")
unlock = RadioSettingGroup("unlock", "Unlock Settings")
fmradio = RadioSettingGroup("fmradio", _("FM Radio"))

roinfo = RadioSettingGroup("roinfo", _("Driver information"))

top = RadioSettings(
basic, keya, dtmf, dtmfc, scanl, unlock, fmradio, roinfo)

# Programmable keys
tmpval = int(_mem.key1_shortpress_action)
if tmpval >= len(KEYACTIONS_LIST):
tmpval = 0
rs = RadioSetting("key1_shortpress_action", "Side key 1 short press",
RadioSettingValueList(
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
keya.append(rs)

tmpval = int(_mem.key1_longpress_action)
if tmpval >= len(KEYACTIONS_LIST):
tmpval = 0
rs = RadioSetting("key1_longpress_action", "Side key 1 long press",
RadioSettingValueList(
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
keya.append(rs)

tmpval = int(_mem.key2_shortpress_action)
if tmpval >= len(KEYACTIONS_LIST):
tmpval = 0
rs = RadioSetting("key2_shortpress_action", "Side key 2 short press",
RadioSettingValueList(
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
keya.append(rs)

tmpval = int(_mem.key2_longpress_action)
if tmpval >= len(KEYACTIONS_LIST):
tmpval = 0
rs = RadioSetting("key2_longpress_action", "Side key 2 long press",
RadioSettingValueList(
KEYACTIONS_LIST, KEYACTIONS_LIST[tmpval]))
keya.append(rs)

# DTMF settings
tmppr = bool(_mem.dtmf_settings.side_tone > 0)
rs = RadioSetting(
"dtmf_side_tone",
"DTMF Sidetone",
RadioSettingValueBoolean(tmppr))
dtmf.append(rs)

tmpval = str(_mem.dtmf_settings.separate_code)
if tmpval not in DTMF_CODE_CHARS:
tmpval = '*'
val = RadioSettingValueString(1, 1, tmpval)
val.set_charset(DTMF_CODE_CHARS)
rs = RadioSetting("dtmf_separate_code", "Separate Code", val)
dtmf.append(rs)

tmpval = str(_mem.dtmf_settings.group_call_code)
if tmpval not in DTMF_CODE_CHARS:
tmpval = '#'
val = RadioSettingValueString(1, 1, tmpval)
val.set_charset(DTMF_CODE_CHARS)
rs = RadioSetting("dtmf_group_call_code", "Group Call Code", val)
dtmf.append(rs)

tmpval = _mem.dtmf_settings.decode_response
if tmpval >= len(DTMF_DECODE_RESPONSE_LIST):
tmpval = 0
rs = RadioSetting("dtmf_decode_response", "Decode Response",
RadioSettingValueList(
DTMF_DECODE_RESPONSE_LIST,
DTMF_DECODE_RESPONSE_LIST[tmpval]))
dtmf.append(rs)

tmpval = _mem.dtmf_settings.auto_reset_time
if tmpval > 60 or tmpval < 5:
tmpval = 5
rs = RadioSetting("dtmf_auto_reset_time",
"Auto reset time (s)",
RadioSettingValueInteger(5, 60, tmpval))
dtmf.append(rs)

tmpval = int(_mem.dtmf_settings.preload_time)
if tmpval > 100 or tmpval < 3:
tmpval = 30
tmpval *= 10
rs = RadioSetting("dtmf_preload_time",
"Pre-load time (ms)",
RadioSettingValueInteger(30, 1000, tmpval, 10))
dtmf.append(rs)

tmpval = int(_mem.dtmf_settings.first_code_persist_time)
if tmpval > 100 or tmpval < 3:
tmpval = 30
tmpval *= 10
rs = RadioSetting("dtmf_first_code_persist_time",
"First code persist time (ms)",
RadioSettingValueInteger(30, 1000, tmpval, 10))
dtmf.append(rs)

tmpval = int(_mem.dtmf_settings.hash_persist_time)
if tmpval > 100 or tmpval < 3:
tmpval = 30
tmpval *= 10
rs = RadioSetting("dtmf_hash_persist_time",
"#/* persist time (ms)",
RadioSettingValueInteger(30, 1000, tmpval, 10))
dtmf.append(rs)

tmpval = int(_mem.dtmf_settings.code_persist_time)
if tmpval > 100 or tmpval < 3:
tmpval = 30
tmpval *= 10
rs = RadioSetting("dtmf_code_persist_time",
"Code persist time (ms)",
RadioSettingValueInteger(30, 1000, tmpval, 10))
dtmf.append(rs)

tmpval = int(_mem.dtmf_settings.code_interval_time)
if tmpval > 100 or tmpval < 3:
tmpval = 30
tmpval *= 10
rs = RadioSetting("dtmf_code_interval_time",
"Code interval time (ms)",
RadioSettingValueInteger(30, 1000, tmpval, 10))
dtmf.append(rs)

tmpval = bool(_mem.dtmf_settings.permit_remote_kill > 0)
rs = RadioSetting(
"dtmf_permit_remote_kill",
"Permit remote kill",
RadioSettingValueBoolean(tmpval))
dtmf.append(rs)

tmpval = str(_mem.dtmf_settings_numbers.dtmf_local_code).upper().strip(
"\x00\xff\x20")
for i in tmpval:
if i in DTMF_CHARS_ID:
continue
else:
tmpval = "103"
break
val = RadioSettingValueString(3, 3, tmpval)
val.set_charset(DTMF_CHARS_ID)
rs = RadioSetting("dtmf_dtmf_local_code",
"Local code (3 chars 0-9 ABCD)", val)
dtmf.append(rs)

tmpval = str(_mem.dtmf_settings_numbers.dtmf_up_code).upper().strip(
"\x00\xff\x20")
for i in tmpval:
if i in DTMF_CHARS_UPDOWN or i == "":
continue
else:
tmpval = "123"
break
val = RadioSettingValueString(1, 16, tmpval)
val.set_charset(DTMF_CHARS_UPDOWN)
rs = RadioSetting("dtmf_dtmf_up_code",
"Up code (1-16 chars 0-9 ABCD*#)", val)
dtmf.append(rs)

tmpval = str(_mem.dtmf_settings_numbers.dtmf_down_code).upper().strip(
"\x00\xff\x20")
for i in tmpval:
if i in DTMF_CHARS_UPDOWN:
continue
else:
tmpval = "456"
break
val = RadioSettingValueString(1, 16, tmpval)
val.set_charset(DTMF_CHARS_UPDOWN)
rs = RadioSetting("dtmf_dtmf_down_code",
"Down code (1-16 chars 0-9 ABCD*#)", val)
dtmf.append(rs)

tmpval = str(_mem.dtmf_settings_numbers.kill_code).upper().strip(
"\x00\xff\x20")
for i in tmpval:
if i in DTMF_CHARS_KILL:
continue
else:
tmpval = "77777"
break
if not len(tmpval) == 5:
tmpval = "77777"
val = RadioSettingValueString(5, 5, tmpval)
val.set_charset(DTMF_CHARS_KILL)
rs = RadioSetting("dtmf_kill_code",
"Kill code (5 chars 0-9 ABCD)", val)
dtmf.append(rs)

tmpval = str(_mem.dtmf_settings_numbers.revive_code).upper().strip(
"\x00\xff\x20")
for i in tmpval:
if i in DTMF_CHARS_KILL:
continue
else:
tmpval = "88888"
break
if not len(tmpval) == 5:
tmpval = "88888"
val = RadioSettingValueString(5, 5, tmpval)
val.set_charset(DTMF_CHARS_KILL)
rs = RadioSetting("dtmf_revive_code",
"Revive code (5 chars 0-9 ABCD)", val)
dtmf.append(rs)

for i in range(1, 17):
varname = "DTMF_"+str(i)
varnumname = "DTMFNUM_"+str(i)
vardescr = "DTMF Contact "+str(i)+" name"
varinumdescr = "DTMF Contact "+str(i)+" number"

cntn = str(_mem.dtmfcontact[i-1].name).strip("\x20\x00\xff")
cntnum = str(_mem.dtmfcontact[i-1].number).strip("\x20\x00\xff")

val = RadioSettingValueString(0, 8, cntn)
rs = RadioSetting(varname, vardescr, val)
dtmfc.append(rs)

val = RadioSettingValueString(0, 3, cntnum)
val.set_charset(DTMF_CHARS)
rs = RadioSetting(varnumname, varinumdescr, val)
dtmfc.append(rs)
rs.set_doc("DTMF Contacts are 3 codes (valid: 0-9 * # ABCD), "
"or an empty string")

# scanlists
if _mem.scanlist_default == 1:
tmpsc = 2
else:
tmpsc = 1
rs = RadioSetting("scanlist_default",
"Default scanlist",
RadioSettingValueInteger(1, 2, tmpsc))
scanl.append(rs)

tmppr = bool((_mem.scanlist1_priority_scan & 1) > 0)
rs = RadioSetting(
"scanlist1_priority_scan",
"Scanlist 1 priority channel scan",
RadioSettingValueBoolean(tmppr))
scanl.append(rs)

tmpch = _mem.scanlist1_priority_ch1 + 1
if tmpch > 200:
tmpch = 0
rs = RadioSetting("scanlist1_priority_ch1",
"Scanlist 1 priority channel 1 (0 - off)",
RadioSettingValueInteger(0, 200, tmpch))
scanl.append(rs)

tmpch = _mem.scanlist1_priority_ch2 + 1
if tmpch > 200:
tmpch = 0
rs = RadioSetting("scanlist1_priority_ch2",
"Scanlist 1 priority channel 2 (0 - off)",
RadioSettingValueInteger(0, 200, tmpch))
scanl.append(rs)

tmppr = bool((_mem.scanlist2_priority_scan & 1) > 0)
rs = RadioSetting(
"scanlist2_priority_scan",
"Scanlist 2 priority channel scan",
RadioSettingValueBoolean(tmppr))
scanl.append(rs)

tmpch = _mem.scanlist2_priority_ch1 + 1
if tmpch > 200:
tmpch = 0
rs = RadioSetting("scanlist2_priority_ch1",
"Scanlist 2 priority channel 1 (0 - off)",
RadioSettingValueInteger(0, 200, tmpch))
scanl.append(rs)

tmpch = _mem.scanlist2_priority_ch2 + 1
if tmpch > 200:
tmpch = 0
rs = RadioSetting("scanlist2_priority_ch2",
"Scanlist 2 priority channel 2 (0 - off)",
RadioSettingValueInteger(0, 200, tmpch))
scanl.append(rs)

# basic settings

# call channel
tmpc = _mem.call_channel+1
if tmpc > 200:
tmpc = 1
rs = RadioSetting("call_channel", "One key call channel",
RadioSettingValueInteger(1, 200, tmpc))
basic.append(rs)

# squelch
tmpsq = _mem.squelch
if tmpsq > 9:
tmpsq = 1
rs = RadioSetting("squelch", "Squelch",
RadioSettingValueInteger(0, 9, tmpsq))
basic.append(rs)

# TOT
tmptot = _mem.max_talk_time
if tmptot > 10:
tmptot = 10
rs = RadioSetting(
"tot",
"Max talk time [min]",
RadioSettingValueInteger(0, 10, tmptot))
basic.append(rs)

# NOAA autoscan
rs = RadioSetting(
"noaa_autoscan",
"NOAA Autoscan", RadioSettingValueBoolean(
bool(_mem.noaa_autoscan > 0)))
basic.append(rs)

# VOX switch
rs = RadioSetting(
"vox_switch",
"VOX enabled", RadioSettingValueBoolean(
bool(_mem.vox_switch > 0)))
basic.append(rs)

# VOX Level
tmpvox = _mem.vox_level+1
if tmpvox > 10:
tmpvox = 10
rs = RadioSetting("vox_level", "VOX Level",
RadioSettingValueInteger(1, 10, tmpvox))
basic.append(rs)

# Mic gain
tmpmicgain = _mem.mic_gain
if tmpmicgain > 4:
tmpmicgain = 4
rs = RadioSetting("mic_gain", "Mic Gain",
RadioSettingValueInteger(0, 4, tmpmicgain))
basic.append(rs)

# Channel display mode
tmpchdispmode = _mem.channel_display_mode
if tmpchdispmode >= len(CHANNELDISP_LIST):
tmpchdispmode = 0
rs = RadioSetting(
"channel_display_mode",
"Channel display mode",
RadioSettingValueList(
CHANNELDISP_LIST,
CHANNELDISP_LIST[tmpchdispmode]))
basic.append(rs)

# Crossband receiving/transmitting
tmpcross = _mem.crossband
if tmpcross >= len(CROSSBAND_LIST):
tmpcross = 0
rs = RadioSetting(
"crossband",
"Cross-band receiving/transmitting",
RadioSettingValueList(
CROSSBAND_LIST,
CROSSBAND_LIST[tmpcross]))
basic.append(rs)

# Battery save
tmpbatsave = _mem.battery_save
if tmpbatsave >= len(BATSAVE_LIST):
tmpbatsave = BATSAVE_LIST.index("1:4")
rs = RadioSetting(
"battery_save",
"Battery Save",
RadioSettingValueList(
BATSAVE_LIST,
BATSAVE_LIST[tmpbatsave]))
basic.append(rs)

# Dual watch
tmpdual = _mem.dual_watch
if tmpdual >= len(DUALWATCH_LIST):
tmpdual = 0
rs = RadioSetting("dualwatch", "Dual Watch", RadioSettingValueList(
DUALWATCH_LIST, DUALWATCH_LIST[tmpdual]))
basic.append(rs)

# Backlight auto mode
tmpback = _mem.backlight_auto_mode
if tmpback >= len(BACKLIGHT_LIST):
tmpback = 0
rs = RadioSetting("backlight_auto_mode",
"Backlight auto mode",
RadioSettingValueList(
BACKLIGHT_LIST,
BACKLIGHT_LIST[tmpback]))
basic.append(rs)

# Tail tone elimination
rs = RadioSetting(
"tail_note_elimination",
"Tail tone elimination",
RadioSettingValueBoolean(
bool(_mem.tail_note_elimination > 0)))
basic.append(rs)

# VFO open
rs = RadioSetting("vfo_open", "VFO open",
RadioSettingValueBoolean(bool(_mem.vfo_open > 0)))
basic.append(rs)

# Beep control
rs = RadioSetting(
"beep_control",
"Beep control",
RadioSettingValueBoolean(bool(_mem.beep_control > 0)))
basic.append(rs)

# Scan resume mode
tmpscanres = _mem.scan_resume_mode
if tmpscanres >= len(SCANRESUME_LIST):
tmpscanres = 0
rs = RadioSetting(
"scan_resume_mode",
"Scan resume mode",
RadioSettingValueList(
SCANRESUME_LIST,
SCANRESUME_LIST[tmpscanres]))
basic.append(rs)

# Keypad locked
rs = RadioSetting(
"key_lock",
"Keypad lock",
RadioSettingValueBoolean(bool(_mem.key_lock > 0)))
basic.append(rs)

# Auto keypad lock
rs = RadioSetting(
"auto_keypad_lock",
"Auto keypad lock",
RadioSettingValueBoolean(bool(_mem.auto_keypad_lock > 0)))
basic.append(rs)

# Power on display mode
tmpdispmode = _mem.power_on_dispmode
if tmpdispmode >= len(WELCOME_LIST):
tmpdispmode = 0
rs = RadioSetting(
"welcome_mode",
"Power on display mode",
RadioSettingValueList(
WELCOME_LIST,
WELCOME_LIST[tmpdispmode]))
basic.append(rs)

# Keypad Tone
tmpkeypadtone = _mem.keypad_tone
if tmpkeypadtone >= len(KEYPADTONE_LIST):
tmpkeypadtone = 0
rs = RadioSetting("keypad_tone", "Keypad tone", RadioSettingValueList(
KEYPADTONE_LIST, KEYPADTONE_LIST[tmpkeypadtone]))
basic.append(rs)

# Language
tmplanguage = _mem.language
if tmplanguage >= len(LANGUAGE_LIST):
tmplanguage = 0
rs = RadioSetting("language", "Language", RadioSettingValueList(
LANGUAGE_LIST, LANGUAGE_LIST[tmplanguage]))
basic.append(rs)

# Alarm mode
tmpalarmmode = _mem.alarm_mode
if tmpalarmmode >= len(ALARMMODE_LIST):
tmpalarmmode = 0
rs = RadioSetting("alarm_mode", "Alarm mode", RadioSettingValueList(
ALARMMODE_LIST, ALARMMODE_LIST[tmpalarmmode]))
basic.append(rs)

# Reminding of end of talk
tmpalarmmode = _mem.reminding_of_end_talk
if tmpalarmmode >= len(REMENDOFTALK_LIST):
tmpalarmmode = 0
rs = RadioSetting(
"reminding_of_end_talk",
"Reminding of end of talk",
RadioSettingValueList(
REMENDOFTALK_LIST,
REMENDOFTALK_LIST[tmpalarmmode]))
basic.append(rs)

# Repeater tail tone elimination
tmprte = _mem.repeater_tail_elimination
if tmprte >= len(RTE_LIST):
tmprte = 0
rs = RadioSetting(
"repeater_tail_elimination",
"Repeater tail tone elimination",
RadioSettingValueList(RTE_LIST, RTE_LIST[tmprte]))
basic.append(rs)

# Logo string 1
logo1 = str(_mem.logo_line1).strip("\x20\x00\xff") + "\x00"
logo1 = _getstring(logo1.encode('ascii', errors='ignore'), 0, 12)
rs = RadioSetting("logo1", _("Logo string 1 (12 characters)"),
RadioSettingValueString(0, 12, logo1))
basic.append(rs)

# Logo string 2
logo2 = str(_mem.logo_line2).strip("\x20\x00\xff") + "\x00"
logo2 = _getstring(logo2.encode('ascii', errors='ignore'), 0, 12)
rs = RadioSetting("logo2", _("Logo string 2 (12 characters)"),
RadioSettingValueString(0, 12, logo2))
basic.append(rs)

# FM radio
for i in range(1, 21):
freqname = "FM_"+str(i)
fmfreq = _mem.fmfreq[i-1]/10.0
if fmfreq < FMMIN or fmfreq > FMMAX:
rs = RadioSetting(freqname, freqname,
RadioSettingValueString(0, 5, ""))
else:
rs = RadioSetting(freqname, freqname,
RadioSettingValueString(0, 5, str(fmfreq)))

fmradio.append(rs)

# unlock settings

# F-LOCK
tmpflock = _mem.lock.flock
if tmpflock >= len(FLOCK_LIST):
tmpflock = 0
rs = RadioSetting(
"flock", "F-LOCK",
RadioSettingValueList(FLOCK_LIST, FLOCK_LIST[tmpflock]))
unlock.append(rs)

# 350TX
rs = RadioSetting("tx350", "350TX - unlock 350-400 MHz TX",
RadioSettingValueBoolean(
bool(_mem.lock.tx350 > 0)))
unlock.append(rs)

# Killed
rs = RadioSetting("Killed", "KILLED Device was disabled (via DTMF)",
RadioSettingValueBoolean(
bool(_mem.lock.killed > 0)))
unlock.append(rs)

# 200TX
rs = RadioSetting("tx200", "200TX - unlock 174-350 MHz TX",
RadioSettingValueBoolean(
bool(_mem.lock.tx200 > 0)))
unlock.append(rs)

# 500TX
rs = RadioSetting("tx500", "500TX - unlock 500-600 MHz TX",
RadioSettingValueBoolean(
bool(_mem.lock.tx500 > 0)))
unlock.append(rs)

# 350EN
rs = RadioSetting("en350", "350EN - unlock 350-400 MHz RX",
RadioSettingValueBoolean(
bool(_mem.lock.en350 > 0)))
unlock.append(rs)

# SCREEN
rs = RadioSetting("scrambler", "SCREN - scrambler enable",
RadioSettingValueBoolean(
bool(_mem.lock.enscramble > 0)))
unlock.append(rs)

# readonly info
# Firmware
firmware = self.metadata.get('uvk5_firmware', 'UNKNOWN')

val = RadioSettingValueString(0, 128, firmware)
val.set_mutable(False)
rs = RadioSetting("fw_ver", "Firmware Version", val)
roinfo.append(rs)

# No limits version for hacked firmware
val = RadioSettingValueBoolean(self._expanded_limits)
rs = RadioSetting("nolimits", "Limits disabled for modified firmware",
val)
rs.set_warning(_(
'This should only be enabled if you are using modified firmware '
'that supports wider frequency coverage. Enabling this will cause '
'CHIRP not to enforce OEM restrictions and may lead to undefined '
'or unregulated behavior. Use at your own risk!'),
safe_value=False)
roinfo.append(rs)

return top

def _set_mem_mode(self, _mem, mode):
if mode == "NFM":
_mem.bandwidth = 1
_mem.enable_am = 0
elif mode == "FM":
_mem.bandwidth = 0
_mem.enable_am = 0
elif mode == "NAM":
_mem.bandwidth = 1
_mem.enable_am = 1
elif mode == "AM":
_mem.bandwidth = 0
_mem.enable_am = 1

# Store details about a high-level memory to the memory map
# This is called when a user edits a memory in the UI
def set_memory(self, mem):
number = mem.number-1

# Get a low-level memory object mapped to the image
_mem = self._memobj.channel[number]
_mem4 = self._memobj
# empty memory
if mem.empty:
_mem.set_raw("\xFF" * 16)
if number < 200:
_mem2 = self._memobj.channelname[number]
_mem2.set_raw("\xFF" * 16)
_mem4.channel_attributes[number].is_scanlist1 = 0
_mem4.channel_attributes[number].is_scanlist2 = 0
# Compander in other models, not supported here
_mem4.channel_attributes[number].compander = 0
_mem4.channel_attributes[number].is_free = 1
_mem4.channel_attributes[number].band = 0x7
return mem

# clean the channel memory, restore some bits if it was used before
if _mem.get_raw(asbytes=False)[0] == "\xff":
# this was an empty memory
_mem.set_raw("\x00" * 16)
else:
# this memory wasn't empty, save some bits that we don't know the
# meaning of, or that we don't support yet
prev_0a = _mem.get_raw()[0x0a] & SAVE_MASK_0A
prev_0b = _mem.get_raw()[0x0b] & SAVE_MASK_0B
prev_0c = _mem.get_raw()[0x0c] & SAVE_MASK_0C
prev_0d = _mem.get_raw()[0x0d] & SAVE_MASK_0D
prev_0e = _mem.get_raw()[0x0e] & SAVE_MASK_0E
prev_0f = _mem.get_raw()[0x0f] & SAVE_MASK_0F
_mem.set_raw("\x00" * 10 +
chr(prev_0a) + chr(prev_0b) + chr(prev_0c) +
chr(prev_0d) + chr(prev_0e) + chr(prev_0f))

if number < 200:
_mem4.channel_attributes[number].is_scanlist1 = 0
_mem4.channel_attributes[number].is_scanlist2 = 0
_mem4.channel_attributes[number].compander = 0
_mem4.channel_attributes[number].is_free = 1
_mem4.channel_attributes[number].band = 0x7

# find band
band = _find_band(self, mem.freq)

self._set_mem_mode(_mem, mem.mode)

# frequency/offset
_mem.freq = mem.freq/10
_mem.offset = mem.offset/10

if mem.duplex == "":
_mem.offset = 0
_mem.shift = 0
elif mem.duplex == '-':
_mem.shift = FLAGS1_OFFSET_MINUS
elif mem.duplex == '+':
_mem.shift = FLAGS1_OFFSET_PLUS
elif mem.duplex == 'off':
# we fake tx disable by setting the tx freq to 0 MHz
_mem.shift = FLAGS1_OFFSET_MINUS
_mem.offset = _mem.freq

# set band
if number < 200:
_mem4.channel_attributes[number].is_free = 0
_mem4.channel_attributes[number].band = band

# channels >200 are the 14 VFO chanells and don't have names
if number < 200:
_mem2 = self._memobj.channelname[number]
tag = mem.name.ljust(10) + "\x00"*6
_mem2.name = tag # Store the alpha tag

# tone data
self._set_tone(mem, _mem)

# step
_mem.step = self._steps.index(mem.tuning_step)

# tx power
if str(mem.power) == str(UVK5_POWER_LEVELS[2]):
_mem.txpower = POWER_HIGH
elif str(mem.power) == str(UVK5_POWER_LEVELS[1]):
_mem.txpower = POWER_MEDIUM
else:
_mem.txpower = POWER_LOW

for setting in mem.extra:
sname = setting.get_name()
svalue = setting.value.get_value()

if sname == "bclo":
_mem.bclo = svalue and 1 or 0

if sname == "pttid":
_mem.dtmf_pttid = self._pttid_list.index(svalue)

if sname == "frev":
_mem.freq_reverse = svalue and 1 or 0

if sname == "dtmfdecode":
_mem.dtmf_decode = svalue and 1 or 0

if sname == "scrambler":
_mem.scrambler = (
_mem.scrambler & 0xf0) | SCRAMBLER_LIST.index(svalue)

if number < 200 and sname == "scanlists":
if svalue == "1":
_mem4.channel_attributes[number].is_scanlist1 = 1
_mem4.channel_attributes[number].is_scanlist2 = 0
elif svalue == "2":
_mem4.channel_attributes[number].is_scanlist1 = 0
_mem4.channel_attributes[number].is_scanlist2 = 1
elif svalue == "1+2":
_mem4.channel_attributes[number].is_scanlist1 = 1
_mem4.channel_attributes[number].is_scanlist2 = 1
else:
_mem4.channel_attributes[number].is_scanlist1 = 0
_mem4.channel_attributes[number].is_scanlist2 = 0

return mem


@directory.register
class UVK5Radio(UVK5RadioBase):
@classmethod
def k5_approve_firmware(cls, firmware):
approved_prefixes = ('k5_2.01.', 'app_2.01.', '2.01.',
'1o11', '4.00.')
return any(firmware.startswith(x) for x in approved_prefixes)


@directory.register
class RA79Radio(UVK5Radio):
"""Retevis RA79"""
VENDOR = "Retevis"
MODEL = "RA79"
(3-3/4)
Copyright 2023 CHIRP Software LLC