ft1d.py - CHIRP

Bug #10969 » ft1d.py

55fc046c - Dan Smith, 11/27/2023 03:13 PM

    
    # Copyright 2010 Dan Smith <dsmith@danplanet.com>

    # Copyright 2014 Angus Ainslie <angus@akkea.ca>

    # Copyright 2023 Declan Rieb <WD5EQY@arrl.net>

    # Sections of digital settings applied from ft70.py, thus

    # Copyright 2017 Nicolas Pike <nick@zbm2.com>

    #

    # This program is free software: you can redistribute it and/or modify

    # it under the terms of the GNU General Public License as published by

    # the Free Software Foundation, either version 3 of the License, or

    # (at your option) any later version.

    #

    # This program is distributed in the hope that it will be useful,

    # but WITHOUT ANY WARRANTY; without even the implied warranty of

    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    # GNU General Public License for more details.

    #

    # You should have received a copy of the GNU General Public License

    # along with this program.  If not, see <http://www.gnu.org/licenses/>.

    import re

    import string

    import logging

    from chirp.drivers import yaesu_clone

    from chirp import chirp_common, directory, bitwise

    from chirp import memmap

    from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \

                RadioSettingValueInteger, RadioSettingValueString, \

                RadioSettingValueList, RadioSettingValueBoolean, \

                InvalidValueError

    from chirp import util

    LOG = logging.getLogger(__name__)

    MEM_SETTINGS_FORMAT = """

    #seekto 0x049a;

    struct {

      u8 vfo_a;

      u8 vfo_b;

    } squelch;

    #seekto 0x04c1;

    struct {

      u8 beep;

    } beep_select;

    #seekto 0x04ce;

    struct {

      u8 lcd_dimmer;        // 14 DIMMER

      u8 dtmf_delay;        // 18 DT DLY

      u8 unknown0[3];

      u8 unknown1:4,

         lcd_contrast:4;

      u8 lamp;              // 28 LAMP

      u8 lock;              // 30 LOCK

      u8 unknown2;

      u8 mic_gain;          // 31 MCGAIN

      u8 unknown2_3;

      u8 dw_interval;       // 21 DW INT

      u8 ptt_delay;         // 42 PTT.DLY

      u8 rx_save;           // 48 RX.SAVE

      u8 scan_restart;      // 53 SCN.STR

      u8 unknown3;

      u8 scan_resume;

      u8 unknown4[5];

      u8 tot;

      u8 unknown5[3];

      u8 vfo_mode:1,        // 60 VFO.MOD

         unknown6:1,

         scan_lamp:1,       // 51 SCN.LMP

         unknown7:1,

         ars:1,             // 45 RPT.ARS

         dtmf_speed:1,      // 20 DT SPD

         unknown8:1,

         dtmf_mode:1;

      u8 busy_led:1,

         unknown9:2,

         bclo:1,            // 03 BCLO

         beep_edge:1,       // 06 BEP.EDG

         unknown9_1:3;

      u8 unknown10:5,

         password:1,

         home_rev:1,        // 26 HOME/REV

         moni:1;            // 32 MON/T-Call

      u8 gm_interval:4,     // 25 GM INT

         unknown11:4;

      u8 vol_mode:1,

         unknown11_1:7;

      u8 unknown12:4,

         home_vfo:1,        // 27 HOME->VFO

         unknown12_1:2,

         dw_rt:1;           // 23 DW RVT;

    } scan_settings;

    #seekto 0x064a;

    struct {

      u8 unknown0[4];

      u8 frequency_band;

      u8 unknown1:6,

         manual_or_mr:2;

      u8 unknown2:7,

         mr_banks:1;

      u8 unknown3;

      u16 mr_index;

      u16 bank_index;

      u16 bank_enable;

      u8 unknown4[5];

      u8 unknown5:6,

         power:2;

      u8 unknown6:4,

         tune_step:4;

      u8 unknown7:6,

         duplex:2;

      u8 unknown8:6,

         tone_mode:2;

      u8 unknown9:2,

         tone:6;

      u8 unknown10;

      u8 unknown11:6,

         mode:2;

      bbcd freq0[4];

      bbcd offset_freq[4];

      u8 unknown12[2];

      char label[16];

      u8 unknown13[6];

      bbcd band_lower[4];

      bbcd band_upper[4];

      bbcd rx_freq[4];

      u8 unknown14[22];

      bbcd freq1[4];

      u8 unknown15[11];

      u8 unknown16:3,

         volume:5;

      u8 unknown17[18];

      u8 active_menu_item;

      u8 checksum;

    } vfo_info[6];

    #seekto 0x047e;

    struct {

      u8 unknown1;

      u8 flag;

      u16 unknown2;

      struct {

        u8 padded_yaesu[16];

      } message;

    } opening_message;

    #seekto 0x%(dtmadd)04X; // FT-1D:0e4a, FT2D:094a

    struct {

      u8 memory[16];

    } dtmf[10];

    #seekto 0x154a;

    // These "channels" seem to actually be a structure:

    //  first five bits are flags

    //      0   Unused (1=entry is unused)

    //      1   SW Broadcast

    //      2   VHF Marine

    //      3   WX (weather)

    //      4   ? a mode? ?

    //  11 bits of index into frequency tables

    //

    struct {

        u16 channel[100];

    } bank_members[24];

    #seekto 0x54a;

    struct {

        u16 in_use;

    } bank_used[24];

    #seekto 0x0EFE;

    struct {

      u8 unknown[2];

      u8 name[16];

    } bank_info[24];

    """

    MEM_FORMAT = """

    struct memslot {

      u8 unknown0:2,

         mode_alt:1,  // mode for FTM-3200D

         clock_shift:1,

         unknown1:4;

      u8 mode:2,

         duplex:2,

         tune_step:4;

      bbcd freq[3];

      u8 power:2,

         digmode:2,   // 0=Analog, 1=AMS, 2=DN, 3=VW

         tone_mode:4;

      u16 charsetbits;

      char label[16];

      bbcd offset[3];

      u8 unknown5:2,

         tone:6;

      u8 unknown6:1,

         dcs:7;

      u16 unknown7;

      u8 unknown8:2,

         att:1,

         autostep:1,

         automode:1,

         unknown9:3;

    };

    #seekto 0x2D4A;

    struct memslot memory[%(memnum)d];

    struct memslot Skip[99];

    struct memslot PMS[100];

    #seekto 0x10ca;

    struct memslot Home[11];

    struct flagslot {

      u8 nosubvfo:1,

         unknown:3,

         pskip:1,

         skip:1,

         used:1,

         valid:1;

    };

    #seekto 0x280A;

    struct flagslot flag[%(memnum)d];

    struct flagslot flagskp[99];

    struct flagslot flagPMS[100];

    """

    MEM_APRS_FORMAT = """

    #seekto 0xbeca;

    struct {

      u8 rx_baud;

      u8 custom_symbol;

      struct {

        char callsign[6];

        u8 ssid;

      } my_callsign;

      u8 unknown3:4,

         selected_position_comment:4;

      u8 unknown4;

      u8 set_time_manually:1,

         tx_interval_beacon:1,

         ring_beacon:1,

         ring_msg:1,

         aprs_mute:1,

         unknown6:1,

         tx_smartbeacon:1,

         af_dual:1;

      u8 unknown7:1,

         aprs_units_wind_mph:1,

         aprs_units_rain_inch:1,

         aprs_units_temperature_f:1,

         aprs_units_altitude_ft:1,

         unknown8:1,

         aprs_units_distance_m:1,

         aprs_units_position_mmss:1;

      u8 unknown9:6,

         aprs_units_speed:2;

      u8 unknown11:1,

         filter_other:1,

         filter_status:1,

         filter_item:1,

         filter_object:1,

         filter_weather:1,

         filter_position:1,

         filter_mic_e:1;

      u8 unknown12;

      u8 unknown13;

      u8 unknown14;

      u8 unknown15:7,

         latitude_sign:1;

      u8 latitude_degree;

      u8 latitude_minute;

      u8 latitude_second;

      u8 unknown16:7,

         longitude_sign:1;

      u8 longitude_degree;

      u8 longitude_minute;

      u8 longitude_second;

      u8 unknown17:4,

         selected_position:4;

      u8 unknown18:5,

         selected_beacon_status_txt:3;

      u8 unknown19:4,

         beacon_interval:4;

      u8 unknowni21:4,

           tx_delay:4;

      u8 unknown21b:6,

         gps_units_altitude_ft:1,

         gps_units_position_sss:1;

      u8 unknown20:6,

         gps_units_speed:2;

      u8 unknown21c[4];

      struct {

        struct {

          char callsign[6];

          u8 ssid;

        } entry[8];

      } digi_path_7;

      u8 unknown22[18];

      struct {

        char padded_string[16];

      } message_macro[7];

      u8 unknown23:5,

         selected_msg_group:3;

      u8 unknown24;

      struct {

        char padded_string[9];

      } msg_group[8];

      u8 unknown25;

      u8 unknown25a:2,

         timezone:6;

      u8 unknown25b[2];

      u8 active_smartbeaconing;

      struct {

        u8 low_speed_mph;

        u8 high_speed_mph;

        u8 slow_rate_min;

        u8 fast_rate_sec;

        u8 turn_angle;

        u8 turn_slop;

        u8 turn_time_sec;

      } smartbeaconing_profile[3];

      u8 unknown26:2,

         flash_msg:6;

      u8 unknown27:2,

         flash_grp:6;

      u8 unknown28:2,

         flash_bln:6;

      u8 selected_digi_path;

      struct {

        struct {

          char callsign[6];

          u8 ssid;

        } entry[2];

      } digi_path_3_6[4];

      u8 unknown30:6,

         selected_my_symbol:2;

      u8 unknown31[3];

      u8 unknown32:2,

         vibrate_msg:6;

      u8 unknown33:2,

         vibrate_grp:6;

      u8 unknown34:2,

         vibrate_bln:6;

    } aprs;

    #seekto 0xc26a;

    struct {

      char padded_string[60];

    } aprs_beacon_status_txt[5];

    #seekto 0xFECA;

    struct {

      bbcd date[3];

      bbcd time[2];

      u8 sequence;

      u8 unknown1;

      u8 unknown2;

      char sender_callsign[9];

      u8 data_type;

      u8 yeasu_data_type;

      u8 unknown4:1,

         callsign_is_ascii:1,

         unknown5:6;

      u8 unknown6;

      u16 pkt_len;

      u8 unknown7;

      u16 in_use;

      u16 unknown8;

      u16 unknown9;

      u16 unknown10;

    } aprs_beacon_meta[60];

    #seekto 0x1064A;

    struct {

      char dst_callsign[9];

      char path[30];

      u16 flags;

      u8 separator;

      char body[134];

    } aprs_beacon_pkt[60];

    #seekto 0x137c4;

    struct {

      u8 flag;

      char dst_callsign[6];

      u8 dst_callsign_ssid;

      char path_and_body[66];

      u8 unknown[70];

    } aprs_message_pkt[60];

    """

    MEM_BACKTRACK_FORMAT = """

    #seekto 0xdf06;

    struct {

      u8 status; // 01 full 08 empty

      u8 reserved0; // 00

      bbcd year; // 17

      bbcd mon; // 06

      bbcd day; // 01

      u8 reserved1; // 06

      bbcd hour; // 21

      bbcd min; // xx

      u8 reserved2; // 00

      u8 reserved3; // 00

      char NShemi[1];

      char lat[3];

      char lat_min[2];

      char lat_dec_sec[4];

      char WEhemi[1];

      char lon[3];

      char lon_min[2];

      char lon_dec_sec[4];

    } backtrack[3];

    """

    MEM_GM_FORMAT = """

    #seekto 0x04ba;

    struct {

        u8 unknown:3,

            scan_resume:5;          // 52 SCN.RSM

        u8 unknown1:3,

           dw_resume_interval:5;       // 22 DW RSM

        u8 unknown2;

        u8 unknown3:3,

            apo:5;                  // 02 APO

        u8 unknown4:6,

            gm_ring:2;              // 24 GM RNG

        u8 temp_cf;               // Placeholder as not found

        u8 unknown5;

        } first_settings;

    #seekto 0x04ed;

    struct {

        u8 unknown1:1,

           unknown2:1,

           unknown3:1,

           unknown4:1,

           unknown5:1,

           unknown6:1,

           unknown7:1,

           unknown8:1;

         } test_bit_field;

    #seekto 0x04c0;

    struct {

        u8 unknown1:5,

            beep_level:3;           // 05 BEP.LVL

        u8 unknown2:6,

            beep_select:2;          // 04 BEEP

        } beep_settings;

    #seekto 0xCF30;

    struct {

        u8 unknown0;

        u8 unknown1;

        u8 unknown2;

        u8 unknown3;

        u8 unknown4;

        u8 unknown5;

        u8 unknown6;

        u8 digital_popup;              // 15 DIG.POP

        } digital_settings_more;

    #seekto 0xCF7C;

    struct {

        u8 unknown0:6,

           ams_tx_mode:2;              // AMS TX Mode

        u8 unknown1;

        u8 unknown2:7,

           standby_beep:1;             // 07 BEP.STB

        u8 unknown3;

        u8 unknown4:6,

           gm_ring:2;                  // 24 GM RNG

        u8 unknown5;

        u8 rx_dg_id;                   // RX DG-ID

        u8 tx_dg_id;                   // TX DG-ID

        u8 unknown6:7,

           vw_mode:1;                  // 16 DIG VW

        u8 unknown7;

        } digital_settings;

    #seekto 0x1d6d3;

    struct {

        char message[32];

        } GM[10];

    #seekto 0x0ced0;

    struct {

        char callsign[10];              // 63 MYCALL

        u16 charset;                    // character set ID

        } my_call;

    #seekto 0x1ddca;

    struct {

        struct {

            char name[16];

        } Category[5];

        struct {

            struct {

                char ID[5];             // ASCII numerals

                char name[16];          // blank-fill

                u8 unknown[3];

            } Rooms[20];

        } RoomsPerCategory[5];

    } WiresX_settings;

    """

    MEM_CHECKSUM_FORMAT = """

    #seekto 0x1FDC9;

    u8 checksum;

    """

    TMODES = ["", "Tone", "TSQL", "DTCS"]

    DUPLEX = ["", "-", "+", "split"]

    MODES = ["FM", "AM", "WFM"]

    STEPS = list(chirp_common.TUNING_STEPS)

    STEPS.remove(30.0)

    STEPS.append(100.0)

    STEPS.insert(2, 0.0)  # There is a skipped tuning step at index 2 (?)

    SKIPS = ["", "S", "P"]

    FT1_DTMF_CHARS = list("0123456789ABCD*#-")

    CHARSET = ["%i" % int(x) for x in range(0, 10)] + \

        [chr(x) for x in range(ord("A"), ord("Z") + 1)] + \

        [" ", ] + \

        [chr(x) for x in range(ord("a"), ord("z") + 1)] + \

        list(".,:;*#_-/&()@!?^ ") + list("\x00" * 100)

    POWER_LEVELS = [chirp_common.PowerLevel("Hi", watts=5.00),

                    chirp_common.PowerLevel("L3", watts=2.50),

                    chirp_common.PowerLevel("L2", watts=1.00),

                    chirp_common.PowerLevel("L1", watts=0.05)]

    SKIPNAMES = ["Skip%i" % i for i in range(901, 1000)]

    PMSNAMES = ["%s%i" % (c, i) for i in range(1, 51) for c in ['L', 'U']]

    HOMENAMES = ["Home%i" % i for i in range(1, 12)]

    ALLNAMES = SKIPNAMES + PMSNAMES + HOMENAMES

    # list of (array name, (list of memories in that array))

    # array names must match names of memories defined for radio

    SPECIALS = [

        ("Skip", SKIPNAMES),

        ("PMS", PMSNAMES),

        ("Home", HOMENAMES)

    ]

    # Band edges are integer Hz.

    VALID_BANDS = [

        (510000, 1790000),

        (1800000, 50490000),

        (50500000, 75990000),

        (76000000, 107990000),

        (108000000, 136990000),

        (145000000, 169920000),

        (174000000, 221950000),

        (222000000, 419990000),

        (420000000, 469990000),

        (470000000, 773990000),

        (810010000, 999000000)

    ]

    class FT1Bank(chirp_common.NamedBank):

        """A FT1D bank"""

        def get_name(self):

            _bank = self._model._radio._memobj.bank_info[self.index]

            name = ""

            for i in _bank.name:

                if i == 0xFF:

                    break

                name += CHARSET[i & 0x7F]

            return name.rstrip()

        def set_name(self, name):

            _bank = self._model._radio._memobj.bank_info[self.index]

            _bank.name = [CHARSET.index(x) for x in name.ljust(16)[:16]]

    class FT1BankModel(chirp_common.BankModel):

        """A FT1D bank model"""

        def __init__(self, radio, name='Banks'):

            super(FT1BankModel, self).__init__(radio, name)

            _banks = self._radio._memobj.bank_info

            self._bank_mappings = []

            for index, _bank in enumerate(_banks):

                bank = FT1Bank(self, "%i" % index, "BANK-%i" % index)

                bank.index = index

                self._bank_mappings.append(bank)

        def get_num_mappings(self):

            return len(self._bank_mappings)

        def get_mappings(self):

            return self._bank_mappings

        def _channel_numbers_in_bank(self, bank):

            _bank_used = self._radio._memobj.bank_used[bank.index]

            if _bank_used.in_use == 0xFFFF:

                return set()

            _members = self._radio._memobj.bank_members[bank.index]

            return set([int(ch) + 1 for ch in _members.channel if ch != 0xFFFF])

        def update_vfo(self):

            chosen_bank = [None, None]

            chosen_mr = [None, None]

            flags = self._radio._memobj.flag

            # Find a suitable bank and MR for VFO A and B.

            for bank in self.get_mappings():

                for channel in self._channel_numbers_in_bank(bank):

                    chosen_bank[0] = bank.index

                    chosen_mr[0] = channel

                    if channel & 0x7000 != 0:

                        # Ignore preset channels without comment DAR

                        break

                    if not flags[channel].nosubvfo:

                        chosen_bank[1] = bank.index

                        chosen_mr[1] = channel

                        break

                if chosen_bank[1]:

                    break

            for vfo_index in (0, 1):

                # 3 VFO info structs are stored as 3 pairs of (master, backup)

                vfo = self._radio._memobj.vfo_info[vfo_index * 2]

                vfo_bak = self._radio._memobj.vfo_info[(vfo_index * 2) + 1]

                if vfo.checksum != vfo_bak.checksum:

                    LOG.warn("VFO settings are inconsistent with backup")

                else:

                    if ((chosen_bank[vfo_index] is None) and (vfo.bank_index !=

                                                              0xFFFF)):

                        LOG.info("Disabling banks for VFO %d" % vfo_index)

                        vfo.bank_index = 0xFFFF

                        vfo.mr_index = 0xFFFF

                        vfo.bank_enable = 0xFFFF

                    elif ((chosen_bank[vfo_index] is not None) and

                          (vfo.bank_index == 0xFFFF)):

                        LOG.info("Enabling banks for VFO %d" % vfo_index)

                        vfo.bank_index = chosen_bank[vfo_index]

                        vfo.mr_index = chosen_mr[vfo_index]

                        vfo.bank_enable = 0x0000

                    vfo_bak.bank_index = vfo.bank_index

                    vfo_bak.mr_index = vfo.mr_index

                    vfo_bak.bank_enable = vfo.bank_enable

        def _update_bank_with_channel_numbers(self, bank, channels_in_bank):

            _members = self._radio._memobj.bank_members[bank.index]

            if len(channels_in_bank) > len(_members.channel):

                raise Exception("Too many entries in bank %d" % bank.index)

            empty = 0

            for index, channel_number in enumerate(sorted(channels_in_bank)):

                _members.channel[index] = channel_number - 1

                if channel_number & 0x7000 != 0:

                    LOG.warn("Bank %d uses Yaesu preset frequency id=%04X. "

                             "Chirp cannot see or change that entry." % (

                                 bank.index, channel_number))

                empty = index + 1

            for index in range(empty, len(_members.channel)):

                _members.channel[index] = 0xFFFF

        def add_memory_to_mapping(self, memory, bank):

            channels_in_bank = self._channel_numbers_in_bank(bank)

            channels_in_bank.add(memory.number)

            self._update_bank_with_channel_numbers(bank, channels_in_bank)

            _bank_used = self._radio._memobj.bank_used[bank.index]

            _bank_used.in_use = 0x06

            self.update_vfo()

        def remove_memory_from_mapping(self, memory, bank):

            channels_in_bank = self._channel_numbers_in_bank(bank)

            try:

                channels_in_bank.remove(memory.number)

            except KeyError:

                raise Exception("Memory %i is not in bank %s. Cannot remove" %

                                (memory.number, bank))

            self._update_bank_with_channel_numbers(bank, channels_in_bank)

            if not channels_in_bank:

                _bank_used = self._radio._memobj.bank_used[bank.index]

                _bank_used.in_use = 0xFFFF

            self.update_vfo()

        def get_mapping_memories(self, bank):

            memories = []

            for channel in self._channel_numbers_in_bank(bank):

                memories.append(self._radio.get_memory(channel))

            return memories

        def get_memory_mappings(self, memory):

            banks = []

            for bank in self.get_mappings():

                if memory.number in self._channel_numbers_in_bank(bank):

                    banks.append(bank)

            return banks

    # Note: other radios like FTM3200Radio subclass this radio

    @directory.register

    class FT1Radio(yaesu_clone.YaesuCloneModeRadio):

        """Yaesu FT1DR"""

        BAUD_RATE = 38400

        VENDOR = "Yaesu"

        MODEL = "FT-1D"

        VARIANT = "R"

        FORMATS = [directory.register_format('FT1D ADMS-6', '*.ft1d')]

        class_specials = SPECIALS

        _model = b"AH44M"

        _memsize = 130507

        _block_lengths = [10, 130497]

        _block_size = 32

        MAX_MEM_SLOT = 900

        _mem_params = {

             "memnum": 900,            # size of memories array

             "flgnum": 900,            # size of flags array

             "dtmadd": 0xe4a,          # location of DTMF storage

        }

        _has_vibrate = False

        _has_af_dual = True

        _adms_ext = '.ft1d'

        _SG_RE = re.compile(r"(?P<sign>[-+NESW]?)(?P<d>[\d]+)[\s\.,]*"

                            r"(?P<m>[\d]*)[\s\']*(?P<s>[\d]*)")

        _RX_BAUD = ("off", "1200 baud", "9600 baud")

        _TX_DELAY = ("100ms", "150ms", "200ms", "250ms", "300ms",

                     "400ms", "500ms", "750ms", "1000ms")

        _WIND_UNITS = ("m/s", "mph")

        _RAIN_UNITS = ("mm", "inch")

        _TEMP_UNITS = ("C", "F")

        _ALT_UNITS = ("m", "ft")

        _DIST_UNITS = ("km", "mile")

        _POS_UNITS = ("dd.mmmm'", "dd mm'ss\"")

        _SPEED_UNITS = ("km/h", "knot", "mph")

        _TIME_SOURCE = ("manual", "GPS")

        _TZ = ("-13:00", "-13:30", "-12:00", "-12:30", "-11:00", "-11:30",

               "-10:00", "-10:30", "-09:00", "-09:30", "-08:00", "-08:30",

               "-07:00", "-07:30", "-06:00", "-06:30", "-05:00", "-05:30",

               "-04:00", "-04:30", "-03:00", "-03:30", "-02:00", "-02:30",

               "-01:00", "-01:30", "-00:00", "-00:30", "+01:00", "+01:30",

               "+02:00", "+02:30", "+03:00", "+03:30", "+04:00", "+04:30",

               "+05:00", "+05:30", "+06:00", "+06:30", "+07:00", "+07:30",

               "+08:00", "+08:30", "+09:00", "+09:30", "+10:00", "+10:30",

               "+11:00", "+11:30")

        _BEACON_TYPE = ("Off", "Interval", "SmartBeaconing")

        _SMARTBEACON_PROFILE = ("Off", "Type 1", "Type 2", "Type 3")

        _BEACON_INT = ("30s", "1m", "2m", "3m", "5m", "10m", "15m",

                       "20m", "30m", "60m")

        _DIGI_PATHS = ("OFF", "WIDE1-1", "WIDE1-1, WIDE2-1", "Digi Path 4",

                       "Digi Path 5", "Digi Path 6", "Digi Path 7", "Digi Path 8")

        _MSG_GROUP_NAMES = ("Message Group 1", "Message Group 2",

                            "Message Group 3", "Message Group 4",

                            "Message Group 5", "Message Group 6",

                            "Message Group 7", "Message Group 8")

        _POSITIONS = ("GPS", "Manual Latitude/Longitude",

                      "Manual Latitude/Longitude", "P1", "P2", "P3", "P4",

                      "P5", "P6", "P7", "P8", "P9")

        _FLASH = ("OFF", "2 seconds", "4 seconds", "6 seconds", "8 seconds",

                  "10 seconds", "20 seconds", "30 seconds", "60 seconds",

                  "CONTINUOUS", "every 2 seconds", "every 3 seconds",

                  "every 4 seconds", "every 5 seconds", "every 6 seconds",

                  "every 7 seconds", "every 8 seconds", "every 9 seconds",

                  "every 10 seconds", "every 20 seconds", "every 30 seconds",

                  "every 40 seconds", "every 50 seconds", "every minute",

                  "every 2 minutes", "every 3 minutes", "every 4 minutes",

                  "every 5 minutes", "every 6 minutes", "every 7 minutes",

                  "every 8 minutes", "every 9 minutes", "every 10 minutes")

        _BEEP_SELECT = ("Off", "Key+Scan", "Key")

        _SQUELCH = ["%d" % x for x in range(0, 16)]

        _VOLUME = ["%d" % x for x in range(0, 33)]

        _OPENING_MESSAGE = ("Off", "DC", "Message", "Normal")

        _SCAN_RESUME = ["%.1fs" % (0.5 * x) for x in range(4, 21)] + \

                       ["Busy", "Hold"]

        _SCAN_RESTART = ["%.1fs" % (0.1 * x) for x in range(1, 10)] + \

                        ["%.1fs" % (0.5 * x) for x in range(2, 21)]

        _LAMP_KEY = ["Key %d sec" % x

                     for x in range(2, 11)] + ["Continuous", "OFF"]

        _LCD_CONTRAST = ["Level %d" % x for x in range(1, 16)]

        _LCD_DIMMER = ["Level %d" % x for x in range(1, 7)]

        _TOT_TIME = ["Off"] + ["%.1f min" % (0.5 * x) for x in range(1, 21)]

        _OFF_ON = ("Off", "On")

        _VOL_MODE = ("Normal", "Auto Back")

        _DTMF_MODE = ("Manual", "Auto")

        _DTMF_SPEED = ("50ms", "100ms")

        _DTMF_DELAY = ("50ms", "250ms", "450ms", "750ms", "1000ms")

        _MY_SYMBOL = ("/[ Person", "/b Bike", "/> Car", "User selected")

        _BACKTRACK_STATUS = ("Valid", "Invalid")

        _NS_HEMI = ("N", "S")

        _WE_HEMI = ("W", "E")

        _APRS_HIGH_SPEED_MAX = 70

        _MIC_GAIN = ("Level %d" % i for i in range(1, 10))

        _AMS_TX_MODE = ("TX Auto", "TX DIGITAL", "TX FM")

        _VW_MODE = ("On", "Off")

        _DIG_POP_UP = ("Off", "2sec", "4sec", "6sec", "8sec", "10sec",

                       "20sec", "30sec", "60sec", "Continuous")

        _STANDBY_BEEP = ("On", "Off")

        _ON_OFF = ("On", "Off")

        _TEMP_CF = ("Centigrade", "Fahrenheit")

        _APO_SELECT = ("Off", "0.5H", "1.0H", "1.5H", "2.0H", "2.5H",

                       "3.0H", "3.5H", "4.0H", "4.5H", "5.0H",

                       "5.5H", "6.0H", "6.5H", "7.0H", "7.5H", "8.0H",

                       "8.5H", "9.0H", "9.5H", "10.0H", "10.5H",

                       "11.0H", "11.5H", "12.0H")

        _MONI_TCALL = ("Monitor", "Tone-CALL")

        _HOME_REV = ("Home", "Reverse")

        _LOCK = ("KEY", "DIAL", "Key+Dial", "PTT", "Key+PTT", "Dial+PTT", "ALL")

        _PTT_DELAY = ("Off", "20 ms", "50 ms", "100 ms", "200 ms")

        _BEEP_LEVEL = ("Level %i" % i for i in range(1, 7))

        _SET_MODE = ("Level %i" % i for i in range(1, 8))

        _RX_SAVE = ("OFF", "0.2s", ".3s", ".4s", ".5s", ".6s",

                    ".7s", ".8s", ".9s", "1.0s", "1.5s",

                    "2.0s", "2.5s", "3.0s", "3.5s", "4.0s", "4.5s",

                    "5.0s", "5.5s", "6.0s", "6.5s", "7.0s",

                    "7.5s", "8.0s", "8.5s", "9.0s", "10.0s", "15s",

                    "20s", "25s", "30s", "35s", "40s", "45s", "50s", "55s",

                    "60s")

        _VFO_MODE = ("ALL", "BAND")

        _VFO_SCAN_MODE = ("BAND", "ALL")

        _MEMORY_SCAN_MODE = ("BAND", "ALL")

        _SG_RE = re.compile(r"(?P<sign>[-+NESW]?)(?P<d>[\d]+)[\s\.,]*"

                            "(?P<m>[\d]*)[\s\']*(?P<s>[\d]*)")

        _RX_BAUD = ("off", "1200 baud", "9600 baud")

        _TX_DELAY = ("100ms", "150ms", "200ms", "250ms", "300ms",

                     "400ms", "500ms", "750ms", "1000ms")

        _WIND_UNITS = ("m/s", "mph")

        _RAIN_UNITS = ("mm", "inch")

        _TEMP_UNITS = ("C", "F")

        _ALT_UNITS = ("m", "ft")

        _DIST_UNITS = ("km", "mile")

        _POS_UNITS = ("dd.mmmm'", "dd mm'ss\"")

        _SPEED_UNITS = ("km/h", "knot", "mph")

        _TIME_SOURCE = ("manual", "GPS")

        _TZ = ("-13:00", "-13:30", "-12:00", "-12:30", "-11:00", "-11:30",

               "-10:00", "-10:30", "-09:00", "-09:30", "-08:00", "-08:30",

               "-07:00", "-07:30", "-06:00", "-06:30", "-05:00", "-05:30",

               "-04:00", "-04:30", "-03:00", "-03:30", "-02:00", "-02:30",

               "-01:00", "-01:30", "-00:00", "-00:30", "+01:00", "+01:30",

               "+02:00", "+02:30", "+03:00", "+03:30", "+04:00", "+04:30",

               "+05:00", "+05:30", "+06:00", "+06:30", "+07:00", "+07:30",

               "+08:00", "+08:30", "+09:00", "+09:30", "+10:00", "+10:30",

               "+11:00", "+11:30")

        _BEACON_TYPE = ("Off", "Interval", "SmartBeaconing")

        _SMARTBEACON_PROFILE = ("Off", "Type 1", "Type 2", "Type 3")

        _BEACON_INT = ("30s", "1m", "2m", "3m", "5m", "10m", "15m",

                       "20m", "30m", "60m")

        _DIGI_PATHS = ("OFF", "WIDE1-1", "WIDE1-1, WIDE2-1", "Digi Path 4",

                       "Digi Path 5", "Digi Path 6", "Digi Path 7", "Digi Path 8")

        _MSG_GROUP_NAMES = ("Message Group 1", "Message Group 2",

                            "Message Group 3", "Message Group 4",

                            "Message Group 5", "Message Group 6",

                            "Message Group 7", "Message Group 8")

        _POSITIONS = ("GPS", "Manual Latitude/Longitude",

                      "Manual Latitude/Longitude", "P1", "P2", "P3", "P4",

                      "P5", "P6", "P7", "P8", "P9")

        _FLASH = ("OFF", "2 seconds", "4 seconds", "6 seconds", "8 seconds",

                  "10 seconds", "20 seconds", "30 seconds", "60 seconds",

                  "CONTINUOUS", "every 2 seconds", "every 3 seconds",

                  "every 4 seconds", "every 5 seconds", "every 6 seconds",

                  "every 7 seconds", "every 8 seconds", "every 9 seconds",

                  "every 10 seconds", "every 20 seconds", "every 30 seconds",

                  "every 40 seconds", "every 50 seconds", "every minute",

                  "every 2 minutes", "every 3 minutes", "every 4 minutes",

                  "every 5 minutes", "every 6 minutes", "every 7 minutes",

                  "every 8 minutes", "every 9 minutes", "every 10 minutes")

        _BEEP_SELECT = ("Off", "Key+Scan", "Key")

        _SQUELCH = ["%d" % x for x in range(0, 16)]

        _VOLUME = ["%d" % x for x in range(0, 33)]

        _DG_ID = ["%d" % x for x in range(0, 100)]

        _GM_RING = ("OFF", "IN RING", "AlWAYS")

        _GM_INTERVAL = ("LONG", "NORMAL", "OFF")

        _MYCALL_CHR_SET = list(string.ascii_uppercase) + \

            list(string.digits) + ['-', '/']

        @classmethod

        def match_model(cls, filedata, filename):

            if filename.endswith(cls._adms_ext):

                return True

            else:

                return super().match_model(filedata, filename)

        @classmethod

        def get_prompts(cls):

            rp = chirp_common.RadioPrompts()

            rp.pre_download = _(

                "1. Turn radio off.\n"

                "2. Connect cable to DATA terminal.\n"

                "3. Press and hold in the [F] key while turning the radio on\n"

                "     (\"CLONE\" will appear on the display).\n"

                "4. <b>After clicking OK</b>, press the [BAND] key to send"

                " image.\n")

            rp.pre_upload = _(

                "1. Turn radio off.\n"

                "2. Connect cable to DATA terminal.\n"

                "3. Press and hold in the [F] key while turning the radio on\n"

                "     (\"CLONE\" will appear on the display).\n"

                "4. Press the [Dx] key (\"-WAIT-\" will appear on the LCD).\n")

            return rp

        def process_mmap(self):

            mem_format = MEM_SETTINGS_FORMAT + MEM_FORMAT + MEM_APRS_FORMAT + \

                    MEM_BACKTRACK_FORMAT + MEM_GM_FORMAT + MEM_CHECKSUM_FORMAT

            self._memobj = bitwise.parse(mem_format % self._mem_params, self._mmap)

        def get_features(self):

            rf = chirp_common.RadioFeatures()

            rf.has_dtcs_polarity = False

            rf.valid_modes = list(MODES) + ['NFM', 'DN']

            rf.valid_tmodes = list(TMODES)

            rf.valid_duplexes = list(DUPLEX)

            rf.valid_tuning_steps = list(STEPS)

            rf.valid_bands = [(500000, 999900000)]

            rf.valid_skips = SKIPS

            rf.valid_power_levels = POWER_LEVELS

            rf.valid_characters = "".join(CHARSET)

            rf.valid_name_length = 16

            rf.memory_bounds = (1, 900)

            rf.can_odd_split = True

            rf.has_ctone = False

            rf.has_bank_names = True

            rf.has_settings = True

            rf.valid_special_chans = [name for s in SPECIALS for name in s[1]]

            return rf

        def get_raw_memory(self, number):

            return "\n".join([repr(self._memobj.memory[number - 1]),

                              repr(self._memobj.flag[number - 1])])

        def _checksums(self):

            return [yaesu_clone.YaesuChecksum(0x064A, 0x06C8),

                    yaesu_clone.YaesuChecksum(0x06CA, 0x0748),

                    yaesu_clone.YaesuChecksum(0x074A, 0x07C8),

                    yaesu_clone.YaesuChecksum(0x07CA, 0x0848),

                    yaesu_clone.YaesuChecksum(0x0000, 0x1FDC9)]

        @staticmethod

        def _add_ff_pad(val, length):

            return val.ljust(length, b"\xFF")[:length]

        @classmethod

        def _strip_ff_pads(cls, messages):

            result = []

            for msg_text in messages:

                result.append(str(msg_text).rstrip("\xFF"))

            return result

    #   Called with a "memref" index to CHIRP memory (int or str)

    #   and optionally with a "extref" extended name.

    #   Find and return the corresponding memobj

    #   Returns:

    #       Corresponding radio memory object

    #       Corresponding radio alag structure (if any)

    #       index into the specific memory object structure (int) ndx

    #       overall index into memory & specials (int) num

    #       an indicator of the specific radio object structure (str)

        def slotloc(self, memref, extref=None):

            array = None

            num = memref

            ename = ""

            mstr = isinstance(memref, str)

            specials = ALLNAMES

            extr = False

            if extref is not None:

                extr = extref in specials

            if mstr or extr:        # named special?

                ename = memref

                num = self.MAX_MEM_SLOT + 1

                # num = -1

                sname = memref if mstr else extref

                # Find name of appropriate memory and index into that memory

                for x in self.class_specials:

                    try:

                        ndx = x[1].index(sname)

                        array = x[0]

                        break

                    except Exception:

                        num += len(x[1])

                        # num -= len(x[1])

                if array is None:

                    raise IndexError("Unknown special %s", memref)

                num += ndx

                # num -= ndx

            elif memref > self.MAX_MEM_SLOT:         # numbered special

                ename = extref

                ndx = memref - (self.MAX_MEM_SLOT + 1)

                # Find name of appropriate memory and index into that memory

                # But assumes specials are in reverse-quantity order

                for x in self.class_specials:

                    if ndx < len(x[1]):

                        array = x[0]

                        break

                    ndx -= len(x[1])

                if array is None:

                    raise IndexError("Unknown memref number %s", memref)

            else:

                array = "memory"

                ndx = memref - 1

                _flag = self._memobj.flag[ndx]

            if array == "Skip":

                _flag = self._memobj.flagskp[ndx]

            elif array == "PMS":

                _flag = self._memobj.flagPMS[ndx]

            elif array == "Home":

                _flag = None

            _mem = getattr(self._memobj, array)[ndx]

            return (_mem, _flag,  ndx, num, array, ename)

        # Build CHIRP version (mem) of radio's memory (_mem)

        def get_memory(self, number):

            _mem, _flag, ndx, num, array, ename = self.slotloc(number)

            mem = chirp_common.Memory()

            mem.number = num

            if array == "Home":

                mem.empty = False

                mem.extd_number = ename

                mem.name = self._decode_label(_mem)

                mem.immutable += ["empty", "number", "extd_number", "skip"]

            elif array != "memory":

                mem.extd_number = ename

                mem.immutable += ["name", "extd_number"]

            else:

                mem.name = self._decode_label(_mem)

            if _flag is not None:

                mem.skip = _flag.pskip and "P" or _flag.skip and "S" or ""

                mem.empty = False

                if not _flag.used:

                    mem.empty = True

                if not _flag.valid:

                    mem.empty = True

            if mem.empty:

                mem.freq = 0

                mem.offset = 0

                mem.duplex = ""

                mem.power = POWER_LEVELS[0]

                mem.mode = "FM"

                mem.tuning_step = 0

            else:

                mem.freq = chirp_common.fix_rounded_step(int(_mem.freq) * 1000)

                mem.offset = int(_mem.offset) * 1000

                mem.rtone = mem.ctone = chirp_common.TONES[_mem.tone]

                self._get_tmode(mem, _mem)

                if mem.duplex is None:

                    mem.duplex = DUPLEX[""]

                else:

                    mem.duplex = DUPLEX[_mem.duplex]

                if mem.duplex == "split":

                    mem.offset = chirp_common.fix_rounded_step(mem.offset)

                mem.mode = self._decode_mode(_mem)

                mem.dtcs = chirp_common.DTCS_CODES[_mem.dcs]

                mem.tuning_step = STEPS[_mem.tune_step]

                mem.power = self._decode_power_level(_mem)

                self._get_mem_extra(mem, _mem)

            return mem

        def _get_mem_extra(self, mem, _mem):

            mem.extra = RadioSettingGroup('Extra', 'extra')

            ams = _mem.digmode == 1

            rs = RadioSetting('ysf_ams', 'AMS mode',

                              RadioSettingValueBoolean(ams))

            mem.extra.append(rs)

        def _set_mem_extra(self, mem, _mem):

            if 'ysf_ams' in mem.extra:

                # We only set AMS if the memory mode is DN. If it is FM,

                # then that takes precedence as "analog-only".

                if mem.mode == 'DN':

                    orig = int(_mem.digmode)

                    _mem.digmode = int(mem.extra['ysf_ams'].value) and 1 or 2

                    LOG.debug('Changed digmode from %i to %i' % (

                        orig, _mem.digmode))

        def _decode_label(self, mem):

            charset = ''.join(CHARSET).ljust(256, '.')

            return str(mem.label).rstrip("\xFF").translate(charset)

        def _encode_label(self, mem):

            label = "".join([chr(CHARSET.index(x))

                             for x in mem.name.rstrip()]).encode()

            return self._add_ff_pad(label, 16)

        def _encode_charsetbits(self, mem):

            # We only speak English here in chirpville

            return 0x0000

        def _decode_power_level(self, mem):

            return POWER_LEVELS[3 - mem.power]

        def _encode_power_level(self, mem):

            if mem.power is None:

                return 3        # Choose lowest power

            else:

                return 3 - POWER_LEVELS.index(mem.power)

        def _decode_mode(self, mem):

            mode = MODES[mem.mode]

            if mode == 'FM' and int(mem.digmode):

                # DN mode is FM with a digital flag. Since digmode can be AMS or

                # DN, either will be called 'DN' in chirp

                return 'DN'

            if mode == 'FM' and int(mem.mode_alt):

                return 'NFM'

            else:

                return mode

        def _encode_mode(self, mem):

            mode = mem.mode

            if mode == 'NFM':

                # Narrow is handled by a separate flag

                mode = 'FM'

            elif mode == 'DN':

                # DN mode is FM with a digital flag

                mode = 'FM'

            return MODES.index(mode)

        def _get_tmode(self, mem, _mem):

            mem.tmode = TMODES[_mem.tone_mode]

        def _set_tmode(self, _mem, mem):

            _mem.tone_mode = TMODES.index(mem.tmode)

        def _set_mode(self, _mem, mem):

            _mem.mode_alt = mem.mode == 'NFM'

            if mem.mode == 'DN' and int(_mem.digmode) == 0:

                # If we are going to DN mode, default to AMS

                LOG.debug('New mode DN, setting AMS')

                if 'ysf_ams' not in mem.extra:

                    _mem.digmode = 1

                else:

                    # If we have the extra setting, use that, since it will be

                    # applied at the end of set_memory() and we want it to apply

                    # the right value.

                    mem.extra['ysf_ams'].value = True

            elif mem.mode == 'FM' and int(_mem.digmode):

                # If we are going back to FM, that means analog-only, so AMS

                # is disabled

                LOG.debug('New mode FM, disabling AMS')

                _mem.digmode = 0

            _mem.mode = self._encode_mode(mem)

            bm = self.get_bank_model()

            for bank in bm.get_memory_mappings(mem):

                bm.remove_memory_from_mapping(mem, bank)

        def _debank(self, mem):

            bm = self.get_bank_model()

            for bank in bm.get_memory_mappings(mem):

                bm.remove_memory_from_mapping(mem, bank)

        def validate_memory(self, mem):

            # Only check the home registers for appropriate bands

            msgs = super().validate_memory(mem)

            ndx = mem.number - ALLNAMES.index("Home1") - self.MAX_MEM_SLOT - 1

            if 10 >= ndx >= 0:

                f = VALID_BANDS[ndx]

                if not(f[0] < mem.freq < f[1]):

                    msgs.append(chirp_common.ValidationError(

                                "Frequency outside of band for Home%2d" %

                                (ndx + 1)))

            return msgs

        # Modify radio's memory (_mem) corresponding to CHIRP version at 'mem'

        def set_memory(self, mem):

            _mem, flag, ndx, num, regtype, ename = self.slotloc(mem.number,

                                                                mem.extd_number)

            if mem.empty:

                self._wipe_memory(_mem)

                if flag is not None:

                    flag.used = False

                return

            _mem.power = self._encode_power_level(mem)

            _mem.tone = chirp_common.TONES.index(mem.rtone)

            self._set_tmode(_mem, mem)

            _mem.dcs = chirp_common.DTCS_CODES.index(mem.dtcs)

            _mem.tune_step = STEPS.index(mem.tuning_step)

            # duplex "off" is equivalent to "" and may show up in tox test.

            if mem.duplex is None:

                _mem.duplex = DUPLEX.index("")

            else:

                _mem.duplex = DUPLEX.index(mem.duplex)

            self._set_mode(_mem, mem)

            if flag is not None:

                if mem.freq < 30000000 or \

                        (mem.freq > 88000000 and mem.freq < 108000000) or \

                        mem.freq > 580000000:

                    flag.nosubvfo = True     # Masked from VFO B

                else:

                    flag.nosubvfo = False    # Available in both VFOs

            if regtype != "Home":

                self._debank(mem)

                ndx = num - 1

                flag.used = not mem.empty

                flag.valid = True

                flag.skip = mem.skip == "S"

                flag.pskip = mem.skip == "P"

            freq = mem.freq

            _mem.freq = int(freq / 1000)

            _mem.offset = int(mem.offset / 1000)

            _mem.label = self._encode_label(mem)

            _mem.charsetbits = self._encode_charsetbits(mem)

            self._set_mem_extra(mem, _mem)

            return

        @classmethod

        def _wipe_memory(cls, mem):

            mem.set_raw("\x00" * (mem.size() // 8))

            mem.unknown1 = 0x05

        def get_bank_model(self):

            return FT1BankModel(self)

        @classmethod

        def _digi_path_to_str(cls, path):

            path_cmp = []

            for entry in path.entry:

                callsign = str(entry.callsign).rstrip("\xFF")

                if not callsign:

                    break

                path_cmp.append("%s-%d" % (callsign, entry.ssid))

            return ",".join(path_cmp)

        @staticmethod

        def _latlong_sanity(sign, l_d, l_m, l_s, is_lat):

            if sign not in (0, 1):

                sign = 0

            if is_lat:

                d_max = 90

            else:

                d_max = 180

            if l_d < 0 or l_d > d_max:

                l_d = 0

                l_m = 0

                l_s = 0

            if l_m < 0 or l_m > 60:

                l_m = 0

                l_s = 0

            if l_s < 0 or l_s > 60:

                l_s = 0

            return sign, l_d, l_m, l_s

        @classmethod

        def _latlong_to_str(cls, sign, l_d, l_m, l_s, is_lat, to_sexigesimal=True):

            sign, l_d, l_m, l_s = cls._latlong_sanity(sign, l_d, l_m, l_s, is_lat)

            mult = sign and -1 or 1

            if to_sexigesimal:

                return "%d,%d'%d\"" % (mult * l_d, l_m, l_s)

            return "%0.5f" % (mult * l_d + (l_m / 60.0) + (l_s / (60.0 * 60.0)))

        @classmethod

        def _str_to_latlong(cls, lat_long, is_lat):

            sign = 0

            result = [0, 0, 0]

            lat_long = lat_long.strip()

            if not lat_long:

                return 1, 0, 0, 0

            try:

                # DD.MMMMM is the simple case, try that first.

                val = float(lat_long)

                if val < 0:

                    sign = 1

                val = abs(val)

                result[0] = int(val)

                result[1] = int(val * 60) % 60

                result[2] = int(val * 3600) % 60

            except ValueError:

                # Try DD MM'SS" if DD.MMMMM failed.

                match = cls._SG_RE.match(lat_long.strip())

                if match:

                    if match.group("sign") and (match.group("sign") in "SE-"):

                        sign = 1

                    else:

                        sign = 0

                    if match.group("d"):

                        result[0] = int(match.group("d"))

                    if match.group("m"):

                        result[1] = int(match.group("m"))

                    if match.group("s"):

                        result[2] = int(match.group("s"))

                elif len(lat_long) > 4:

                    raise Exception("Lat/Long should be DD MM'SS\" or DD.MMMMM")

            return cls._latlong_sanity(sign, result[0], result[1], result[2],

                                       is_lat)

        def _get_aprs_settings(self):

            menu = RadioSettingGroup("aprs_top", "APRS")

            menu.append(self._get_aprs_general_settings())

            menu.append(self._get_aprs_rx_settings())

            menu.append(self._get_aprs_tx_settings())

            menu.append(self._get_aprs_smartbeacon())

            menu.append(self._get_aprs_msgs())

            menu.append(self._get_aprs_beacons())

            return menu

        def _get_aprs_general_settings(self):

            menu = RadioSettingGroup("aprs_general", "APRS General")

            aprs = self._memobj.aprs

            val = RadioSettingValueString(

                0, 6, str(aprs.my_callsign.callsign).rstrip("\xFF"))

            rs = RadioSetting("aprs.my_callsign.callsign", "My Callsign", val)

            rs.set_apply_callback(self.apply_callsign, aprs.my_callsign)

            menu.append(rs)

            val = RadioSettingValueList(

                chirp_common.APRS_SSID,

                chirp_common.APRS_SSID[aprs.my_callsign.ssid])

            rs = RadioSetting("aprs.my_callsign.ssid", "My SSID", val)

            menu.append(rs)

            val = RadioSettingValueList(self._MY_SYMBOL,

                                        self._MY_SYMBOL[aprs.selected_my_symbol])

            rs = RadioSetting("aprs.selected_my_symbol", "My Symbol", val)

            menu.append(rs)

            symbols = list(chirp_common.APRS_SYMBOLS)

            selected = aprs.custom_symbol

            if aprs.custom_symbol >= len(chirp_common.APRS_SYMBOLS):

                symbols.append("%d" % aprs.custom_symbol)

                selected = len(symbols) - 1

            val = RadioSettingValueList(symbols, symbols[selected])

            rs = RadioSetting("aprs.custom_symbol_text", "User Selected Symbol",

                              val)

            rs.set_apply_callback(self.apply_custom_symbol, aprs)

            menu.append(rs)

            val = RadioSettingValueList(

                chirp_common.APRS_POSITION_COMMENT,

                chirp_common.APRS_POSITION_COMMENT[aprs.selected_position_comment])

            rs = RadioSetting("aprs.selected_position_comment", "Position Comment",

                              val)

            menu.append(rs)

            latitude = self._latlong_to_str(aprs.latitude_sign,

                                            aprs.latitude_degree,

                                            aprs.latitude_minute,

                                            aprs.latitude_second,

                                            True, aprs.aprs_units_position_mmss)

            longitude = self._latlong_to_str(aprs.longitude_sign,

                                             aprs.longitude_degree,

                                             aprs.longitude_minute,

                                             aprs.longitude_second,

                                             False, aprs.aprs_units_position_mmss)

            # TODO: Rebuild this when aprs_units_position_mmss changes.

            # TODO: Rebuild this when latitude/longitude change.

            # TODO: Add saved positions p1 - p10 to memory map.

            position_str = list(self._POSITIONS)

            # position_str[1] = "%s %s" % (latitude, longitude)

            # position_str[2] = "%s %s" % (latitude, longitude)

            val = RadioSettingValueList(position_str,

                                        position_str[aprs.selected_position])

            rs = RadioSetting("aprs.selected_position", "My Position", val)

            menu.append(rs)

            val = RadioSettingValueString(0, 10, latitude)

            rs = RadioSetting("latitude", "Manual Latitude", val)

            rs.set_apply_callback(self.apply_lat_long, aprs)

            menu.append(rs)

            val = RadioSettingValueString(0, 11, longitude)

            rs = RadioSetting("longitude", "Manual Longitude", val)

            rs.set_apply_callback(self.apply_lat_long, aprs)

            menu.append(rs)

            val = RadioSettingValueList(

                self._TIME_SOURCE, self._TIME_SOURCE[aprs.set_time_manually])

            rs = RadioSetting("aprs.set_time_manually", "Time Source", val)

            menu.append(rs)

            val = RadioSettingValueList(self._TZ, self._TZ[aprs.timezone])

            rs = RadioSetting("aprs.timezone", "Timezone", val)

            menu.append(rs)

            val = RadioSettingValueList(self._SPEED_UNITS,

                                        self._SPEED_UNITS[aprs.aprs_units_speed])

            rs = RadioSetting("aprs.aprs_units_speed", "APRS Speed Units", val)

            menu.append(rs)

            val = RadioSettingValueList(self._SPEED_UNITS,

                                        self._SPEED_UNITS[aprs.gps_units_speed])

            rs = RadioSetting("aprs.gps_units_speed", "GPS Speed Units", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._ALT_UNITS, self._ALT_UNITS[aprs.aprs_units_altitude_ft])

            rs = RadioSetting("aprs.aprs_units_altitude_ft", "APRS Altitude Units",

                              val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._ALT_UNITS, self._ALT_UNITS[aprs.gps_units_altitude_ft])

            rs = RadioSetting("aprs.gps_units_altitude_ft", "GPS Altitude Units",

                              val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._POS_UNITS, self._POS_UNITS[aprs.aprs_units_position_mmss])

            rs = RadioSetting("aprs.aprs_units_position_mmss",

                              "APRS Position Format", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._POS_UNITS, self._POS_UNITS[aprs.gps_units_position_sss])

            rs = RadioSetting("aprs.gps_units_position_sss",

                              "GPS Position Format", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._DIST_UNITS, self._DIST_UNITS[aprs.aprs_units_distance_m])

            rs = RadioSetting("aprs.aprs_units_distance_m", "APRS Distance Units",

                              val)

            menu.append(rs)

            val = RadioSettingValueList(self._WIND_UNITS,

                                        self._WIND_UNITS[aprs.aprs_units_wind_mph])

            rs = RadioSetting("aprs.aprs_units_wind_mph", "APRS Wind Speed Units",

                              val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._RAIN_UNITS, self._RAIN_UNITS[aprs.aprs_units_rain_inch])

            rs = RadioSetting("aprs.aprs_units_rain_inch", "APRS Rain Units", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._TEMP_UNITS, self._TEMP_UNITS[aprs.aprs_units_temperature_f])

            rs = RadioSetting("aprs.aprs_units_temperature_f",

                              "APRS Temperature Units", val)

            menu.append(rs)

            return menu

        def _get_aprs_msgs(self):

            menu = RadioSettingGroup("aprs_msg", "APRS Messages")

            aprs_msg = self._memobj.aprs_message_pkt

            for index in range(0, 60):

                if aprs_msg[index].flag != 255:

                    astring = \

                        str(aprs_msg[index].dst_callsign).partition("\xFF")[0]

                    val = RadioSettingValueString(

                        0, 9, chirp_common.sanitize_string(astring) +

                        "-%d" % aprs_msg[index].dst_callsign_ssid)

                    val.set_mutable(False)

                    rs = RadioSetting(

                        "aprs_msg.dst_callsign%d" % index,

                        "Dst Callsign %d" % index, val)

                    menu.append(rs)

                    astring = \

                        str(aprs_msg[index].path_and_body).partition("\xFF")[0]

                    val = RadioSettingValueString(

                        0, 66, chirp_common.sanitize_string(astring))

                    val.set_mutable(False)

                    rs = RadioSetting(

                        "aprs_msg.path_and_body%d" % index, "Body", val)

                    menu.append(rs)

            return menu

        def _get_aprs_beacons(self):

            menu = RadioSettingGroup("aprs_beacons", "APRS Beacons")

            aprs_beacon = self._memobj.aprs_beacon_pkt

            aprs_meta = self._memobj.aprs_beacon_meta

            for index in range(0, 60):

                # There is probably a more pythonesque way to do this

                scl = int(aprs_meta[index].sender_callsign[0])

                dcl = int(aprs_beacon[index].dst_callsign[0])

                if scl != 255 and scl != 0:  # ignore if empty send call

                    callsign = str(aprs_meta[index].sender_callsign).rstrip("\xFF")

                    val = RadioSettingValueString(0, 9, callsign)

                    val.set_mutable(False)

                    rs = RadioSetting(

                        "aprs_beacon.src_callsign%d" % index,

                        "SRC Callsign %d" % index, val)

                    menu.append(rs)

                    if dcl != 255 and dcl != 0:   # ignore if empty dest call

                        val = str(aprs_beacon[index].dst_callsign)

                        val = RadioSettingValueString(0, 9, val.rstrip("\xFF"))

                        val.set_mutable(False)

                        rs = RadioSetting(

                            "aprs_beacon.dst_callsign%d" % index,

                            "DST Callsign %d" % index, val)

                        menu.append(rs)

                    date = "%02d/%02d/%02d" % (

                        aprs_meta[index].date[0],

                        aprs_meta[index].date[1],

                        aprs_meta[index].date[2])

                    val = RadioSettingValueString(0, 8, date)

                    val.set_mutable(False)

                    rs = RadioSetting("aprs_beacon.date%d" % index, "Date", val)

                    menu.append(rs)

                    time = "%02d:%02d" % (

                        aprs_meta[index].time[0],

                        aprs_meta[index].time[1])

                    val = RadioSettingValueString(0, 5, time)

                    val.set_mutable(False)

                    rs = RadioSetting("aprs_beacon.time%d" % index, "Time", val)

                    menu.append(rs)

                    if dcl != 255 and dcl != 0:   # ignore if empty dest call

                        path = str(aprs_beacon[index].path).replace("\x00", " ")

                        path = ''.join(c for c in path

                                       if c in string.printable).strip()

                        path = str(path).replace("\xE0", "*")

                        val = RadioSettingValueString(0, 32, path)

                        val.set_mutable(False)

                        rs = RadioSetting(

                         "aprs_beacon.path%d" % index, "Digipath", val)

                        menu.append(rs)

                    body = str(aprs_beacon[index].body).rstrip("\xFF")

                    checksum = body[-2:]

                    body = ''.join(s for s in body[:-2]

                                   if s in string.printable).translate(

                                       str.maketrans(

                                           "", "", "\x09\x0a\x0b\x0c\x0d"))

                    try:

                        val = RadioSettingValueString(0, 134, body.strip())

                    except Exception as e:

                        LOG.error("Error in APRS beacon at index %s", index)

                        raise e

                    val.set_mutable(False)

                    rs = RadioSetting("aprs_beacon.body%d" % index, "Body", val)

                    menu.append(rs)

            return menu

        def _get_aprs_rx_settings(self):

            menu = RadioSettingGroup("aprs_rx", "APRS Receive")

            aprs = self._memobj.aprs

            val = RadioSettingValueList(self._RX_BAUD, self._RX_BAUD[aprs.rx_baud])

            rs = RadioSetting("aprs.rx_baud", "Modem RX", val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.aprs_mute)

            rs = RadioSetting("aprs.aprs_mute", "APRS Mute", val)

            menu.append(rs)

            if self._has_af_dual:

                val = RadioSettingValueBoolean(aprs.af_dual)

                rs = RadioSetting("aprs.af_dual", "AF Dual", val)

                menu.append(rs)

            val = RadioSettingValueBoolean(aprs.ring_msg)

            rs = RadioSetting("aprs.ring_msg", "Ring on Message RX", val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.ring_beacon)

            rs = RadioSetting("aprs.ring_beacon", "Ring on Beacon RX", val)

            menu.append(rs)

            val = RadioSettingValueList(self._FLASH,

                                        self._FLASH[aprs.flash_msg])

            rs = RadioSetting("aprs.flash_msg", "Flash on personal message", val)

            menu.append(rs)

            if self._has_vibrate:

                val = RadioSettingValueList(self._FLASH,

                                            self._FLASH[aprs.vibrate_msg])

                rs = RadioSetting("aprs.vibrate_msg",

                                  "Vibrate on personal message", val)

                menu.append(rs)

            val = RadioSettingValueList(self._FLASH[:10],

                                        self._FLASH[aprs.flash_bln])

            rs = RadioSetting("aprs.flash_bln", "Flash on bulletin message", val)

            menu.append(rs)

            if self._has_vibrate:

                val = RadioSettingValueList(self._FLASH[:10],

                                            self._FLASH[aprs.vibrate_bln])

                rs = RadioSetting("aprs.vibrate_bln",

                                  "Vibrate on bulletin message", val)

                menu.append(rs)

            val = RadioSettingValueList(self._FLASH[:10],

                                        self._FLASH[aprs.flash_grp])

            rs = RadioSetting("aprs.flash_grp", "Flash on group message", val)

            menu.append(rs)

            if self._has_vibrate:

                val = RadioSettingValueList(self._FLASH[:10],

                                            self._FLASH[aprs.vibrate_grp])

                rs = RadioSetting("aprs.vibrate_grp",

                                  "Vibrate on group message", val)

                menu.append(rs)

            filter_val = [m.padded_string for m in aprs.msg_group]

            filter_val = self._strip_ff_pads(filter_val)

            for index, filter_text in enumerate(filter_val):

                val = RadioSettingValueString(0, 9, filter_text)

                rs = RadioSetting("aprs.msg_group_%d" % index,

                                  "Message Group %d" % (index + 1), val)

                menu.append(rs)

                rs.set_apply_callback(self.apply_ff_padded_string,

                                      aprs.msg_group[index])

            # TODO: Use filter_val as the list entries and update it on edit.

            val = RadioSettingValueList(

                self._MSG_GROUP_NAMES,

                self._MSG_GROUP_NAMES[aprs.selected_msg_group])

            rs = RadioSetting("aprs.selected_msg_group", "Selected Message Group",

                              val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.filter_mic_e)

            rs = RadioSetting("aprs.filter_mic_e", "Receive Mic-E Beacons", val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.filter_position)

            rs = RadioSetting("aprs.filter_position", "Receive Position Beacons",

                              val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.filter_weather)

            rs = RadioSetting("aprs.filter_weather", "Receive Weather Beacons",

                              val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.filter_object)

            rs = RadioSetting("aprs.filter_object", "Receive Object Beacons", val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.filter_item)

            rs = RadioSetting("aprs.filter_item", "Receive Item Beacons", val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.filter_status)

            rs = RadioSetting("aprs.filter_status", "Receive Status Beacons", val)

            menu.append(rs)

            val = RadioSettingValueBoolean(aprs.filter_other)

            rs = RadioSetting("aprs.filter_other", "Receive Other Beacons", val)

            menu.append(rs)

            return menu

        def _get_aprs_tx_settings(self):

            menu = RadioSettingGroup("aprs_tx", "APRS Transmit")

            aprs = self._memobj.aprs

            beacon_type = (aprs.tx_smartbeacon << 1) | aprs.tx_interval_beacon

            val = RadioSettingValueList(self._BEACON_TYPE,

                                        self._BEACON_TYPE[beacon_type])

            rs = RadioSetting("aprs.transmit", "TX Beacons", val)

            rs.set_apply_callback(self.apply_beacon_type, aprs)

            menu.append(rs)

            val = RadioSettingValueList(self._TX_DELAY,

                                        self._TX_DELAY[aprs.tx_delay])

            rs = RadioSetting("aprs.tx_delay", "TX Delay", val)

            menu.append(rs)

            val = RadioSettingValueList(self._BEACON_INT,

                                        self._BEACON_INT[aprs.beacon_interval])

            rs = RadioSetting("aprs.beacon_interval", "Beacon Interval", val)

            menu.append(rs)

            desc = []

            status = [m.padded_string for m in self._memobj.aprs_beacon_status_txt]

            status = self._strip_ff_pads(status)

            for index, msg_text in enumerate(status):

                val = RadioSettingValueString(0, 60, msg_text)

                desc.append("Beacon Status Text %d" % (index + 1))

                rs = RadioSetting("aprs_beacon_status_txt_%d" % index, desc[-1],

                                  val)

                rs.set_apply_callback(self.apply_ff_padded_string,

                                      self._memobj.aprs_beacon_status_txt[index])

                menu.append(rs)

            val = RadioSettingValueList(desc,

                                        desc[aprs.selected_beacon_status_txt])

            rs = RadioSetting("aprs.selected_beacon_status_txt",

                              "Beacon Status Text", val)

            menu.append(rs)

            message_macro = [m.padded_string for m in aprs.message_macro]

            message_macro = self._strip_ff_pads(message_macro)

            for index, msg_text in enumerate(message_macro):

                val = RadioSettingValueString(0, 16, msg_text)

                rs = RadioSetting("aprs.message_macro_%d" % index,

                                  "Message Macro %d" % (index + 1), val)

                rs.set_apply_callback(self.apply_ff_padded_string,

                                      aprs.message_macro[index])

                menu.append(rs)

            path_str = list(self._DIGI_PATHS)

            path_str[3] = self._digi_path_to_str(aprs.digi_path_3_6[0])

            val = RadioSettingValueString(0, 22, path_str[3])

            rs = RadioSetting("aprs.digi_path_3", "Digi Path 4 (2 entries)", val)

            rs.set_apply_callback(self.apply_digi_path, aprs.digi_path_3_6[0])

            menu.append(rs)

            path_str[4] = self._digi_path_to_str(aprs.digi_path_3_6[1])

            val = RadioSettingValueString(0, 22, path_str[4])

            rs = RadioSetting("aprs.digi_path_4", "Digi Path 5 (2 entries)", val)

            rs.set_apply_callback(self.apply_digi_path, aprs.digi_path_3_6[1])

            menu.append(rs)

            path_str[5] = self._digi_path_to_str(aprs.digi_path_3_6[2])

            val = RadioSettingValueString(0, 22, path_str[5])

            rs = RadioSetting("aprs.digi_path_5", "Digi Path 6 (2 entries)", val)

            rs.set_apply_callback(self.apply_digi_path, aprs.digi_path_3_6[2])

            menu.append(rs)

            path_str[6] = self._digi_path_to_str(aprs.digi_path_3_6[3])

            val = RadioSettingValueString(0, 22, path_str[6])

            rs = RadioSetting("aprs.digi_path_6", "Digi Path 7 (2 entries)", val)

            rs.set_apply_callback(self.apply_digi_path, aprs.digi_path_3_6[3])

            menu.append(rs)

            path_str[7] = self._digi_path_to_str(aprs.digi_path_7)

            val = RadioSettingValueString(0, 88, path_str[7])

            rs = RadioSetting("aprs.digi_path_7", "Digi Path 8 (8 entries)", val)

            rs.set_apply_callback(self.apply_digi_path, aprs.digi_path_7)

            menu.append(rs)

            # Show friendly messages for empty slots rather than blanks.

            # TODO: Rebuild this when digi_path_[34567] change.

            # path_str[3] = path_str[3] or self._DIGI_PATHS[3]

            # path_str[4] = path_str[4] or self._DIGI_PATHS[4]

            # path_str[5] = path_str[5] or self._DIGI_PATHS[5]

            # path_str[6] = path_str[6] or self._DIGI_PATHS[6]

            # path_str[7] = path_str[7] or self._DIGI_PATHS[7]

            path_str[3] = self._DIGI_PATHS[3]

            path_str[4] = self._DIGI_PATHS[4]

            path_str[5] = self._DIGI_PATHS[5]

            path_str[6] = self._DIGI_PATHS[6]

            path_str[7] = self._DIGI_PATHS[7]

            val = RadioSettingValueList(path_str,

                                        path_str[aprs.selected_digi_path])

            rs = RadioSetting("aprs.selected_digi_path", "Selected Digi Path", val)

            menu.append(rs)

            return menu

        def _get_aprs_smartbeacon(self):

            menu = RadioSettingGroup("aprs_smartbeacon", "APRS SmartBeacon")

            aprs = self._memobj.aprs

            val = RadioSettingValueList(

                self._SMARTBEACON_PROFILE,

                self._SMARTBEACON_PROFILE[aprs.active_smartbeaconing])

            rs = RadioSetting("aprs.active_smartbeaconing", "SmartBeacon profile",

                              val)

            menu.append(rs)

            for profile in range(3):

                pfx = "type%d" % (profile + 1)

                path = "aprs.smartbeaconing_profile[%d]" % profile

                prof = aprs.smartbeaconing_profile[profile]

                low_val = RadioSettingValueInteger(2, 30, prof.low_speed_mph)

                high_val = RadioSettingValueInteger(3, self._APRS_HIGH_SPEED_MAX,

                                                    prof.high_speed_mph)

                low_val.get_max = lambda: min(30, int(high_val.get_value()) - 1)

                rs = RadioSetting("%s.low_speed_mph" % path,

                                  "%s Low Speed (mph)" % pfx, low_val)

                menu.append(rs)

                rs = RadioSetting("%s.high_speed_mph" % path,

                                  "%s High Speed (mph)" % pfx, high_val)

                menu.append(rs)

                val = RadioSettingValueInteger(1, 100, prof.slow_rate_min)

                rs = RadioSetting("%s.slow_rate_min" % path,

                                  "%s Slow rate (minutes)" % pfx, val)

                menu.append(rs)

                val = RadioSettingValueInteger(10, 180, prof.fast_rate_sec)

                rs = RadioSetting("%s.fast_rate_sec" % path,

                                  "%s Fast rate (seconds)" % pfx, val)

                menu.append(rs)

                val = RadioSettingValueInteger(5, 90, prof.turn_angle)

                rs = RadioSetting("%s.turn_angle" % path,

                                  "%s Turn angle (degrees)" % pfx, val)

                menu.append(rs)

                val = RadioSettingValueInteger(1, 255, prof.turn_slop)

                rs = RadioSetting("%s.turn_slop" % path,

                                  "%s Turn slop" % pfx, val)

                menu.append(rs)

                val = RadioSettingValueInteger(5, 180, prof.turn_time_sec)

                rs = RadioSetting("%s.turn_time_sec" % path,

                                  "%s Turn time (seconds)" % pfx, val)

                menu.append(rs)

            return menu

        def _get_digital_settings(self):

            topmenu = RadioSettingGroup("digital_settings", "Digital")

            menu = RadioSettingGroup("settings", "Digital Modes")

            topmenu.append(menu)

            GMmenu = RadioSettingGroup("first_settings", "Group Monitor(GM)")

            topmenu.append(GMmenu)

            WXmenu = RadioSettingGroup("WiresX_settings", "Wires-X")

            topmenu.append(WXmenu)

            # MYCALL

            mycall = self._memobj.my_call

            mycallstr = str(mycall.callsign).rstrip("\xff").rstrip()

            mycalle = RadioSettingValueString(0, 10, mycallstr, False,

                                              charset=self._MYCALL_CHR_SET)

            rs = RadioSetting('mycall.callsign',

                              'MYCALL (10 uppercase chars)', mycalle)

            rs.set_apply_callback(self.apply_mycall, mycall)

            menu.append(rs)

            # Short Press AMS button AMS TX Mode

            digital_settings = self._memobj.digital_settings

            val = RadioSettingValueList(

                self._AMS_TX_MODE,

                self._AMS_TX_MODE[digital_settings.ams_tx_mode])

            rs = RadioSetting("digital_settings.ams_tx_mode",

                              "AMS TX Mode", val)

            menu.append(rs)

            # 16 DIG VW  Turn the VW mode selection ON or OFF.

            val = RadioSettingValueList(

                self._VW_MODE,

                self._VW_MODE[digital_settings.vw_mode])

            rs = RadioSetting("digital_settings.vw_mode", "VW Mode", val)

            menu.append(rs)

            # TX DG-ID Long Press Mode Key, Dial

            val = RadioSettingValueList(

                self._DG_ID,

                self._DG_ID[digital_settings.tx_dg_id])

            rs = RadioSetting("digital_settings.tx_dg_id",

                              "TX DG-ID", val)

            menu.append(rs)

            # RX DG-ID Long Press Mode Key, Mode Key to select, Dial

            val = RadioSettingValueList(

                self._DG_ID,

                self._DG_ID[digital_settings.rx_dg_id])

            rs = RadioSetting("digital_settings.rx_dg_id",

                              "RX DG-ID", val)

            menu.append(rs)

            # 15 DIG.POP    Call sign display pop up time

            digital_settings_more = self._memobj.digital_settings_more

            val = RadioSettingValueList(

                self._DIG_POP_UP,

                self._DIG_POP_UP[

                    0 if digital_settings_more.digital_popup == 0

                    else digital_settings_more.digital_popup - 9])

            rs = RadioSetting("digital_settings_more.digital_popup",

                              "Digital Popup", val)

            rs.set_apply_callback(self.apply_digital_popup,

                                  digital_settings_more)

            menu.append(rs)

            # 07  BEP.STB    Standby Beep in the digital C4FM mode. On/Off

            val = RadioSettingValueList(

                self._STANDBY_BEEP,

                self._STANDBY_BEEP[digital_settings.standby_beep])

            rs = RadioSetting("digital_settings.standby_beep",

                              "Standby Beep", val)

            menu.append(rs)

            # GM settings

            # 24 GM RNG Select the beep option

            first_settings = self._memobj.first_settings

            val = RadioSettingValueList(

                self._GM_RING,

                self._GM_RING[first_settings.gm_ring])

            rs = RadioSetting("first_settings.gm_ring", "GM Ring", val)

            GMmenu.append(rs)

            # 25 GM INT transmission interval of digital GM info

            scan_settings = self._memobj.scan_settings

            val = RadioSettingValueList(

                self._GM_INTERVAL,

                self._GM_INTERVAL[scan_settings.gm_interval])

            rs = RadioSetting("scan_settings.gm_interval",

                              "GM Interval", val)

            GMmenu.append(rs)

            m = self._memobj.GM

            for i in range(0, 10):

                cname = "GM[%d].message" % i

                msg = str(m[i].message).rstrip("\xff)")

                val = RadioSettingValueString(0, 32, msg)

                rs = RadioSetting(cname, "GM Message%2d" % (i + 1),

                                  val)

                GMmenu.append(rs)

            # WiresX settings

            wxc = self._memobj.WiresX_settings

            for i in range(0, 5):

                cname = "WiresX_settings.Category[%d].name" % (i + 1)

                c = ''

                for j in range(0, 16):

                    s = wxc.Category[i].name[j]

                    if int(s) != 0xff:

                        c = c + str(s)

                val = RadioSettingValueString(0, 16, c)

                rs = RadioSetting(cname, "Category %d" % (i+1), val)

                rs.set_apply_callback(self.apply_WiresX_category,

                                      wxc.Category[i].name)

                WXmenu.append(rs)

                r = wxc.RoomsPerCategory[i]

                rn = False

                for j in range(0, 20):

                    idn = "0"

                    if int(r.Rooms[j].ID[1]) != 0xff:

                        idn = r.Rooms[j].ID

                        rn = False

                    elif rn:

                        break

                    elif j > 0:

                        rn = True

                    val = RadioSettingValueInteger(0, 99999, int(str(idn)))

                    vname = "WiresX_settings.RoomsperCategory%s" \

                            "Rooms[%d].ID" % (i, j)

                    rs = RadioSetting(vname, "   Room ID%2s (5 numerals)" %

                                      (j+1), val)

                    rs.set_apply_callback(self.apply_WiresX_roomid,

                                          r.Rooms[j])

                    WXmenu.append(rs)

                    cn = ''

                    for l in range(0, 16):

                        s = r.Rooms[j].name[l]

                        if int(s) != 0xff:

                            cn = cn + str(s)

                    val = RadioSettingValueString(0, 16, str(cn))

                    cname = "WiresX_settings.RoomsperCategory%s" \

                            "Rooms[%d].name" % (i, j)

                    rs = RadioSetting(cname, "   Room Name%2s (16 chars)" %

                                      (j+1), val)

                    rs.set_apply_callback(self.apply_WiresX_roomname,

                                          r.Rooms[j])

                    WXmenu.append(rs)

                pass

            return topmenu

        def apply_WiresX_category(cls, setting, obj):

            val = setting.value.get_value()

            setattr(obj, "name", val)

        def apply_WiresX_roomid(self, setting, obj):

            val = setting.value.get_value()

            obj.ID = self.zero_pad(val, 5)

        def apply_WiresX_roomname(cls, setting, obj):

            val = setting.value.get_value()

            obj.name = str(val)

        def _get_dtmf_settings(self):

            menu = RadioSettingGroup("dtmf_settings", "DTMF")

            dtmf = self._memobj.scan_settings

            val = RadioSettingValueList(

                self._DTMF_MODE,

                self._DTMF_MODE[dtmf.dtmf_mode])

            rs = RadioSetting("scan_settings.dtmf_mode", "DTMF Mode", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._DTMF_SPEED,

                self._DTMF_SPEED[dtmf.dtmf_speed])

            rs = RadioSetting(

                "scan_settings.dtmf_speed", "DTMF AutoDial Speed", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._DTMF_DELAY,

                self._DTMF_DELAY[dtmf.dtmf_delay])

            rs = RadioSetting(

                "scan_settings.dtmf_delay", "DTMF AutoDial Delay", val)

            menu.append(rs)

            for i in range(10):

                name = "dtmf_%02d" % i

                dtmfsetting = self._memobj.dtmf[i]

                dtmfstr = ""

                for c in dtmfsetting.memory:

                    if c == 0xFF:

                        break

                    if c < len(FT1_DTMF_CHARS):

                        dtmfstr += FT1_DTMF_CHARS[c]

                dtmfentry = RadioSettingValueString(0, 16, dtmfstr)

                dtmfentry.set_charset(FT1_DTMF_CHARS + list("abcd "))

                rs = RadioSetting(name, name.upper(), dtmfentry)

                rs.set_apply_callback(self.apply_dtmf, i)

                menu.append(rs)

            return menu

        def _get_misc_settings(self):

            menu = RadioSettingGroup("misc_settings", "Misc")

            scan_settings = self._memobj.scan_settings

            val = RadioSettingValueList(

                self._LCD_DIMMER,

                self._LCD_DIMMER[scan_settings.lcd_dimmer])

            rs = RadioSetting("scan_settings.lcd_dimmer", "LCD Dimmer", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._LCD_CONTRAST,

                self._LCD_CONTRAST[scan_settings.lcd_contrast - 1])

            rs = RadioSetting("scan_settings.lcd_contrast", "LCD Contrast",

                              val)

            rs.set_apply_callback(self.apply_lcd_contrast, scan_settings)

            menu.append(rs)

            val = RadioSettingValueList(

                self._LAMP_KEY,

                self._LAMP_KEY[scan_settings.lamp])

            rs = RadioSetting("scan_settings.lamp", "Lamp", val)

            menu.append(rs)

            beep_select = self._memobj.beep_select

            val = RadioSettingValueList(

                self._BEEP_SELECT,

                self._BEEP_SELECT[beep_select.beep])

            rs = RadioSetting("beep_select.beep", "Beep Select", val)

            menu.append(rs)

            opening_message = self._memobj.opening_message

            val = RadioSettingValueList(

                self._OPENING_MESSAGE,

                self._OPENING_MESSAGE[opening_message.flag])

            rs = RadioSetting("opening_message.flag", "Opening Msg Mode",

                              val)

            menu.append(rs)

            rs = self._decode_opening_message(opening_message)

            menu.append(rs)

            return menu

        def _decode_opening_message(self, opening_message):

            msg = ""

            for i in opening_message.message.padded_yaesu:

                if i == 0xFF:

                    break

                msg += CHARSET[i & 0x7F]

            val = RadioSettingValueString(0, 16, msg)

            rs = RadioSetting("opening_message.message.padded_yaesu",

                              "Opening Message", val)

            rs.set_apply_callback(self.apply_ff_padded_yaesu,

                                  opening_message.message)

            return rs

        def backtrack_ll_validate(self, number, min, max):

            if str(number).lstrip('0').strip().isdigit() and \

                    int(str(number).lstrip('0')) <= max and \

                    int(str(number).lstrip('0')) >= min:

                return True

            return False

        @staticmethod

        def zero_pad(number, length):

            """

            Applies a leading zero pad of length `length` to `number`

            """

            return str(number).rjust(length, "0")

        def _get_backtrack_settings(self):

            menu = RadioSettingGroup("backtrack", "Backtrack")

            for i in range(3):

                prefix = ''

                if i == 0:

                    prefix = "Star "

                if i == 1:

                    prefix = "L1 "

                if i == 2:

                    prefix = "L2 "

                bt_idx = "backtrack[%d]" % i

                bt = self._memobj.backtrack[i]

                val = RadioSettingValueList(

                    self._BACKTRACK_STATUS,

                    self._BACKTRACK_STATUS[0 if bt.status == 1 else 1])

                rs = RadioSetting(

                        "%s.status" % bt_idx,

                        prefix + "status", val)

                rs.set_apply_callback(self.apply_backtrack_status, bt)

                menu.append(rs)

                if bt.status == 1 and int(bt.year) < 100:

                    val = RadioSettingValueInteger(0, 99, bt.year)

                else:

                    val = RadioSettingValueInteger(0, 99, 0)

                rs = RadioSetting(

                        "%s.year" % bt_idx,

                        prefix + "year", val)

                menu.append(rs)

                if bt.status == 1 and int(bt.mon) <= 12:

                    val = RadioSettingValueInteger(0, 12, bt.mon)

                else:

                    val = RadioSettingValueInteger(0, 12, 0)

                rs = RadioSetting(

                        "%s.mon" % bt_idx,

                        prefix + "month", val)

                menu.append(rs)

                if bt.status == 1:

                    val = RadioSettingValueInteger(0, 31, bt.day)

                else:

                    val = RadioSettingValueInteger(0, 31, 0)

                rs = RadioSetting(

                        "%s.day" % bt_idx,

                        prefix + "day", val)

                menu.append(rs)

                if bt.status == 1:

                    val = RadioSettingValueInteger(0, 23, bt.hour)

                else:

                    val = RadioSettingValueInteger(0, 23, 0)

                rs = RadioSetting(

                        "%s.hour" % bt_idx,

                        prefix + "hour", val)

                menu.append(rs)

                if bt.status == 1:

                    val = RadioSettingValueInteger(0, 59, bt.min)

                else:

                    val = RadioSettingValueInteger(0, 59, 0)

                rs = RadioSetting(

                        "%s.min" % bt_idx,

                        prefix + "min", val)

                menu.append(rs)

                if bt.status == 1 and \

                        (str(bt.NShemi) == 'N' or str(bt.NShemi) == 'S'):

                    val = RadioSettingValueString(0, 1, str(bt.NShemi))

                else:

                    val = RadioSettingValueString(0, 1, ' ')

                rs = RadioSetting(

                        "%s.NShemi" % bt_idx,

                        prefix + "NS hemisphere", val)

                rs.set_apply_callback(self.apply_NShemi, bt)

                menu.append(rs)

                if bt.status == 1 and self.backtrack_ll_validate(bt.lat, 0, 90):

                    val = RadioSettingValueString(

                            0, 3, self.zero_pad(bt.lat, 3))

                else:

                    val = RadioSettingValueString(0, 3, '   ')

                rs = RadioSetting("%s.lat" % bt_idx, prefix + "Latitude", val)

                rs.set_apply_callback(self.apply_bt_lat, bt)

                menu.append(rs)

                if bt.status == 1 and \

                        self.backtrack_ll_validate(bt.lat_min, 0, 59):

                    val = RadioSettingValueString(

                        0, 2, self.zero_pad(bt.lat_min, 2))

                else:

                    val = RadioSettingValueString(0, 2, '  ')

                rs = RadioSetting(

                        "%s.lat_min" % bt_idx,

                        prefix + "Latitude Minutes", val)

                rs.set_apply_callback(self.apply_bt_lat_min, bt)

                menu.append(rs)

                if bt.status == 1 and \

                        self.backtrack_ll_validate(bt.lat_dec_sec, 0, 9999):

                    val = RadioSettingValueString(

                        0, 4, self.zero_pad(bt.lat_dec_sec, 4))

                else:

                    val = RadioSettingValueString(0, 4, '    ')

                rs = RadioSetting(

                        "%s.lat_dec_sec" % bt_idx,

                        prefix + "Latitude Decimal Seconds", val)

                rs.set_apply_callback(self.apply_bt_lat_dec_sec, bt)

                menu.append(rs)

                if bt.status == 1 and \

                        (str(bt.WEhemi) == 'W' or str(bt.WEhemi) == 'E'):

                    val = RadioSettingValueString(

                        0, 1, str(bt.WEhemi))

                else:

                    val = RadioSettingValueString(0, 1, ' ')

                rs = RadioSetting(

                        "%s.WEhemi" % bt_idx,

                        prefix + "WE hemisphere", val)

                rs.set_apply_callback(self.apply_WEhemi, bt)

                menu.append(rs)

                if bt.status == 1 and self.backtrack_ll_validate(bt.lon, 0, 180):

                    val = RadioSettingValueString(

                        0, 3, self.zero_pad(bt.lon, 3))

                else:

                    val = RadioSettingValueString(0, 3, '   ')

                rs = RadioSetting("%s.lon" % bt_idx, prefix + "Longitude", val)

                rs.set_apply_callback(self.apply_bt_lon, bt)

                menu.append(rs)

                if bt.status == 1 and \

                        self.backtrack_ll_validate(bt.lon_min, 0, 59):

                    val = RadioSettingValueString(

                        0, 2, self.zero_pad(bt.lon_min, 2))

                else:

                    val = RadioSettingValueString(0, 2, '  ')

                rs = RadioSetting(

                        "%s.lon_min" % bt_idx,

                        prefix + "Longitude Minutes", val)

                rs.set_apply_callback(self.apply_bt_lon_min, bt)

                menu.append(rs)

                if bt.status == 1 and \

                        self.backtrack_ll_validate(bt.lon_dec_sec, 0, 9999):

                    val = RadioSettingValueString(

                        0, 4, self.zero_pad(bt.lon_dec_sec, 4))

                else:

                    val = RadioSettingValueString(0, 4, '    ')

                rs = RadioSetting(

                    "%s.lon_dec_sec" % bt_idx,

                    prefix + "Longitude Decimal Seconds", val)

                rs.set_apply_callback(self.apply_bt_lon_dec_sec, bt)

                menu.append(rs)

            return menu

        def _get_scan_settings(self):

            menu = RadioSettingGroup("scan_settings", "Scan")

            scan_settings = self._memobj.scan_settings

            val = RadioSettingValueList(

                self._VOL_MODE,

                self._VOL_MODE[scan_settings.vol_mode])

            rs = RadioSetting("scan_settings.vol_mode", "Volume Mode", val)

            menu.append(rs)

            vfoa = self._memobj.vfo_info[0]

            val = RadioSettingValueList(

                self._VOLUME,

                self._VOLUME[vfoa.volume])

            rs = RadioSetting("vfo_info[0].volume", "VFO A Volume", val)

            rs.set_apply_callback(self.apply_volume, 0)

            menu.append(rs)

            vfob = self._memobj.vfo_info[1]

            val = RadioSettingValueList(

                self._VOLUME,

                self._VOLUME[vfob.volume])

            rs = RadioSetting("vfo_info[1].volume", "VFO B Volume", val)

            rs.set_apply_callback(self.apply_volume, 1)

            menu.append(rs)

            squelch = self._memobj.squelch

            val = RadioSettingValueList(

                self._SQUELCH,

                self._SQUELCH[squelch.vfo_a])

            rs = RadioSetting("squelch.vfo_a", "VFO A Squelch", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._SQUELCH,

                self._SQUELCH[squelch.vfo_b])

            rs = RadioSetting("squelch.vfo_b", "VFO B Squelch", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._SCAN_RESTART,

                self._SCAN_RESTART[scan_settings.scan_restart])

            rs = RadioSetting("scan_settings.scan_restart", "Scan Restart", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._SCAN_RESUME,

                self._SCAN_RESUME[scan_settings.scan_resume])

            rs = RadioSetting("scan_settings.scan_resume", "Scan Resume", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._OFF_ON,

                self._OFF_ON[scan_settings.busy_led])

            rs = RadioSetting("scan_settings.busy_led", "Busy LED", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._OFF_ON,

                self._OFF_ON[scan_settings.scan_lamp])

            rs = RadioSetting("scan_settings.scan_lamp", "Scan Lamp", val)

            menu.append(rs)

            val = RadioSettingValueList(

                self._TOT_TIME,

                self._TOT_TIME[scan_settings.tot])

            rs = RadioSetting("scan_settings.tot", "Transmit Timeout (TOT)", val)

            menu.append(rs)

            return menu

        def _get_settings(self):

            top = RadioSettings(self._get_aprs_settings(),

                                self._get_digital_settings(),

                                self._get_dtmf_settings(),

                                self._get_misc_settings(),

                                self._get_scan_settings(),

                                self._get_backtrack_settings())

            return top

        def get_settings(self):

            try:

                return self._get_settings()

            except:

                import traceback

                LOG.error("Failed to parse settings: %s", traceback.format_exc())

                return None

        @staticmethod

        def apply_custom_symbol(setting, obj):

            # Ensure new value falls within known bounds, otherwise leave it as

            # it's a custom value from the radio that's outside our list.

            if setting.value.get_value() in chirp_common.APRS_SYMBOLS:

                setattr(obj, "custom_symbol",

                        chirp_common.APRS_SYMBOLS.index(setting.value.get_value()))

        @classmethod

        def _apply_callsign(cls, callsign, obj, default_ssid=None):

            ssid = default_ssid

            dash_index = callsign.find("-")

            if dash_index >= 0:

                ssid = callsign[dash_index + 1:]

                callsign = callsign[:dash_index]

                try:

                    ssid = int(ssid) % 16

                except ValueError:

                    ssid = default_ssid

            setattr(obj, "callsign", cls._add_ff_pad(callsign.encode(), 6))

            if ssid is not None:

                setattr(obj, "ssid", ssid)

        def apply_beacon_type(cls, setting, obj):

            beacon_type = str(setting.value.get_value())

            beacon_index = cls._BEACON_TYPE.index(beacon_type)

            tx_smartbeacon = beacon_index >> 1

            tx_interval_beacon = beacon_index & 1

            if tx_interval_beacon:

                setattr(obj, "tx_interval_beacon", 1)

                setattr(obj, "tx_smartbeacon", 0)

            elif tx_smartbeacon:

                setattr(obj, "tx_interval_beacon", 0)

                setattr(obj, "tx_smartbeacon", 1)

            else:

                setattr(obj, "tx_interval_beacon", 0)

                setattr(obj, "tx_smartbeacon", 0)

        # digital settings callback routines

        def apply_digital_popup(cls, setting, obj):

            rawval = setting.value.get_value()

            val = 0 if cls._DIG_POP_UP.index(rawval) == 0 \

                else cls._DIG_POP_UP.index(rawval) + 9

            obj.digital_popup = val

        def apply_mycall(cls, setting, obj):

            cs = setting.value.get_value()

            if cs[0] in ('-', '/'):

                raise InvalidValueError("First character of"

                                        " call sign can't be - or /:  {0:s}"

                                        .format(cs))

            else:

                obj.callsign = cls._add_ff_pad(cs.rstrip(), 10)

        @classmethod

        def apply_callsign(cls, setting, obj, default_ssid=None):

            # Uppercase, strip SSID then FF pad to max string length.

            callsign = setting.value.get_value().upper()

            cls._apply_callsign(callsign, obj, default_ssid)

        def apply_digi_path(self, setting, obj):

            # Parse and map to aprs.digi_path_4_7[0-3] or aprs.digi_path_8

            # and FF terminate.

            path = str(setting.value.get_value())

            callsigns = [c.strip() for c in path.split(",")]

            for index in range(len(obj.entry)):

                try:

                    self._apply_callsign(callsigns[index], obj.entry[index], 0)

                except IndexError:

                    self._apply_callsign("", obj.entry[index], 0)

            if len(callsigns) > len(obj.entry):

                raise Exception("This path only supports %d entries" % (index + 1))

        @classmethod

        def apply_ff_padded_string(cls, setting, obj):

            # FF pad.

            val = setting.value.get_value()

            max_len = getattr(obj, "padded_string").size() / 8

            val = str(val).rstrip()

            setattr(obj, "padded_string", cls._add_ff_pad(val, max_len))

        @classmethod

        def apply_lat_long(cls, setting, obj):

            name = setting.get_name()

            is_latitude = name.endswith("latitude")

            lat_long = setting.value.get_value().strip()

            sign, l_d, l_m, l_s = cls._str_to_latlong(lat_long, is_latitude)

            LOG.debug("%s: %d %d %d %d" % (name, sign, l_d, l_m, l_s))

            setattr(obj, "%s_sign" % name, sign)

            setattr(obj, "%s_degree" % name, l_d)

            setattr(obj, "%s_minute" % name, l_m)

            setattr(obj, "%s_second" % name, l_s)

        def set_settings(self, settings):

            _mem = self._memobj

            for element in settings:

                if not isinstance(element, RadioSetting):

                    self.set_settings(element)

                    continue

                if not element.changed():

                    continue

                try:

                    if element.has_apply_callback():

                        LOG.debug("Using apply callback")

                        try:

                            element.run_apply_callback()

                        except NotImplementedError as e:

                            LOG.error("ft1d.set_settings: %s", e)

                        continue

                    # Find the object containing setting.

                    obj = _mem

                    bits = element.get_name().split(".")

                    setting = bits[-1]

                    for name in bits[:-1]:

                        if name.endswith("]"):

                            name, index = name.split("[")

                            index = int(index[:-1])

                            obj = getattr(obj, name)[index]

                        else:

                            obj = getattr(obj, name)

                    try:

                        old_val = getattr(obj, setting)

                        LOG.debug("Setting %s(%r) <= %s" % (

                                element.get_name(), old_val, element.value))

                        setattr(obj, setting, element.value)

                    except AttributeError as e:

                        LOG.error("Setting %s is not in the memory map: %s" %

                                  (element.get_name(), e))

                except Exception:

                    LOG.debug(element.get_name())

                    raise

        def apply_ff_padded_yaesu(cls, setting, obj):

            # FF pad yaesus custom string format.

            rawval = setting.value.get_value()

            max_len = getattr(obj, "padded_yaesu").size() / 8

            rawval = str(rawval).rstrip()

            val = [CHARSET.index(x) for x in rawval]

            for x in range(len(val), max_len):

                val.append(0xFF)

            obj.padded_yaesu = val

        def apply_volume(cls, setting, vfo):

            val = setting.value.get_value()

            cls._memobj.vfo_info[(vfo * 2)].volume = val

            cls._memobj.vfo_info[(vfo * 2) + 1].volume = val

        def apply_lcd_contrast(cls, setting, obj):

            rawval = setting.value.get_value()

            val = cls._LCD_CONTRAST.index(rawval) + 1

            obj.lcd_contrast = val

        def apply_dtmf(cls, setting, i):

            rawval = setting.value.get_value().upper().rstrip()

            val = [FT1_DTMF_CHARS.index(x) for x in rawval]

            for x in range(len(val), 16):

                val.append(0xFF)

            cls._memobj.dtmf[i].memory = val

        def apply_backtrack_status(cls, setting, obj):

            status = setting.value.get_value()

            if status == 'Valid':

                val = 1

            else:

                val = 8

            setattr(obj, "status", val)

        def apply_NShemi(cls, setting, obj):

            hemi = setting.value.get_value().upper()

            if hemi != 'N' and hemi != 'S':

                hemi = ' '

            setattr(obj, "NShemi", hemi)

        def apply_WEhemi(cls, setting, obj):

            hemi = setting.value.get_value().upper()

            if hemi != 'W' and hemi != 'E':

                hemi = ' '

            setattr(obj, "WEhemi", hemi)

        def apply_bt_lat(cls, setting, obj):

            val = setting.value.get_value()

            val = cls.backtrack_zero_pad(val, 3)

            setattr(obj, "lat", val)

        def apply_bt_lat_min(cls, setting, obj):

            val = setting.value.get_value()

            val = cls.backtrack_zero_pad(val, 2)

            setattr(obj, "lat_min", val)

        def apply_bt_lat_dec_sec(cls, setting, obj):

            val = setting.value.get_value()

            val = cls.backtrack_zero_pad(val, 4)

            setattr(obj, "lat_dec_sec", val)

        def apply_bt_lon(cls, setting, obj):

            val = setting.value.get_value()

            val = cls.backtrack_zero_pad(val, 3)

            setattr(obj, "lon", val)

        def apply_bt_lon_min(cls, setting, obj):

            val = setting.value.get_value()

            val = cls.backtrack_zero_pad(val, 2)

            setattr(obj, "lon_min", val)

        def apply_bt_lon_dec_sec(cls, setting, obj):

            val = setting.value.get_value()

            val = cls.backtrack_zero_pad(val, 4)

            setattr(obj, "lon_dec_sec", val)

        def load_mmap(self, filename):

            if filename.lower().endswith(self._adms_ext):

                with open(filename, 'rb') as f:

                    self._adms_header = f.read(0x16)

                    LOG.debug('ADMS Header:\n%s',

                              util.hexprint(self._adms_header))

                    self._mmap = memmap.MemoryMapBytes(self._model + f.read())

                    LOG.info('Loaded ADMS file')

                self.process_mmap()

            else:

                chirp_common.CloneModeRadio.load_mmap(self, filename)

        def save_mmap(self, filename):

            if filename.lower().endswith(self._adms_ext):

                if not hasattr(self, '_adms_header'):

                    raise Exception('Unable to save .img to %s' % self._adms_ext)

                with open(filename, 'wb') as f:

                    f.write(self._adms_header)

                    f.write(self._mmap.get_packed()[5:])

                    LOG.info('Wrote file')

            else:

                chirp_common.CloneModeRadio.save_mmap(self, filename)

« Previous
1
2
Next »

(2-2/2)

Project

General

Profile

CHIRP

Bug #10969 » ft1d.py