BaofengUV5R » History » Revision 7
Revision 6 (John LaMartina, 06/20/2016 02:53 PM) → Revision 7/31 (John LaMartina, 06/20/2016 02:53 PM)
{{toc}}
h1. BaofengUV5R
This page provides general tips and troubleshooting for the Baofeng UV-5R and related radios. The UV-5R is the base model for a lot of variants, so this page will apply to many more people than just those with that specific badge on their radio. This information is a summarized version of the Miklor page on the subject. Go there for "more detailed information":http://www.miklor.com/COM/UV_ErrorMess.php
h2. Common Errors
.
h3. Radio Did Not Respond
This is a very common problem. Slightly offset audio jacks could be the problem. Make sure the connector is snapped in all the way. Some cables require a really hard push to snap in that last 1/16 inch. One indication is that the transmitter may be keyed. A slight trimming of the cable's plug side and edge may be required.
. h2.
h3. Driver Issues
Many of the inexpensive programming cables are not the bargain they appear. Due to Prolific USB/Serial chip 'clones' found in generic USB programming cables, an older driver is required in lieu of the driver now automatically supplied by Windows. for "more detailed information":http://http://www.miklor.com/COM/UV_Drivers.php